Skip to lesson
PCPHYSICS CREST
AP Physics 1 · Unit 4 4.1 Momentum4.2 ImpulseGraph IntelligenceImpulse Thinking4.3 Conservation1D CollisionsExplosions & 2D4.4 Collision TypeMomentum + EnergyAP LabAP RoutinesMaster Sheet
1

Unit 4 · Linear Momentum

The Unit 4 idea
Momentum is about motion with direction and how interactions transfer that motion. AP questions move constantly among vectors, force–time graphs, momentum–time graphs, collision diagrams, system boundaries, experiments, and energy comparisons.

4.1 · Linear Momentum

  • MomentumA vector property of a moving object or system.
  • ImpulseIts change due to external force over time.
  • A large force over a short time and a smaller force over a longer time can produce the same impulse.
Momentum
For an object of constant mass, $$\vec p=m\vec v.$$ Momentum is a vector: its direction is the velocity direction. SI unit: $\mathrm{kg\,m\,s^{-1}}$, equivalent to $\mathrm{N\,s}$.
AP collision model
During a short collision, the interaction forces between the objects are usually much larger than the net external force. AP therefore compares the system immediately before and immediately after the interaction and asks whether the external impulse during that short interval is negligible. That—not “collisions always conserve momentum”—is the reason momentum conservation can be used.
2m+vm−2v+x →; velocity arrows schematic, not to scale

Choose a positive direction first. Then keep velocity and momentum signs consistent.

In the sketch, $p_1=(2m)(+v)=+2mv$ and $p_2=m(-2v)=-2mv$. Total momentum is zero even though both objects are moving.

Momentum is not kinetic energy
$\vec p=m\vec v$ is a vector and can cancel. $K=\tfrac12mv^2$ is a scalar and cannot be negative. Zero total momentum does not imply zero total kinetic energy.
Quick Check 1
A $3m$ cart moves right at $2v$ while an $m$ cart moves left at $6v$. What is the total momentum?
$p_{tot}=3m(2v)+m(-6v)=0$.
2

Impulse = Momentum Transfer

4.2 · Change in Momentum and Impulse

  • Net external impulse changes the chosen system’s momentum.
  • The impulse of an individual force equals the momentum change only when other force impulses cancel or are negligible.
  • Instantaneous net force is the local slope of p versus t; a finite interval gives the average force.
Change in momentum$\Delta\vec p=\vec p_f-\vec p_i$
Impulse$\vec J_{net}=\vec F_{net,avg}\Delta t=\Delta\vec p$
Average rate over an interval$\vec F_{net,avg}=\Delta\vec p/\Delta t$
Reversal routine
When an object reverses direction, never use “change in speed.” Use signed velocity: $\Delta p=m(v_f-v_i)$. A rebound can produce a larger $|\Delta p|$ than merely stopping.
Current AP1 boundary
The quantitative impulse–momentum relations in this unit assume the selected system has constant mass. AP Physics 1 does not require quantitative analysis of systems whose mass changes with time.
vᵢ > 0v_f < 0before and after contact; +x right; schematic

If $v_i=+5$ m/s and $v_f=-3$ m/s, then $\Delta v=-8$ m/s—not $-2$ m/s.

The impulse points in the direction of $\Delta\vec p$.

Quick Check 2
A $0.50$ kg ball changes velocity from $+8$ m/s to $-4$ m/s. Find the impulse.
$J=\Delta p=0.50(-4-8)=-6.0\,\mathrm{N\,s}$.
Your turn · A net force of +8 N acts for 0.25 s. Find impulse.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

3

Graph Intelligence

  • Area under an external force–time graph gives impulse.
  • When net external impulse is negligible, a system’s total momentum is conserved.
  • This does not require kinetic energy to remain constant in a collision.

$F_{net}$–$t$ graph

Signed area = impulse = $\Delta p$.

Area above axis adds positive momentum; below axis adds negative momentum.

$p$–$t$ graph

Slope = $F_{net}$.

Horizontal $p(t)$ means zero net external force, not necessarily zero momentum.

Fnet / N0123012t / sp / (kg·m/s)0123024t / s

Force is the slope of momentum: steeper $p(t)$ means larger net force.

Impulse is the change in the vertical coordinate of the momentum graph.

Do not confuse this with Unit 3: area under an $F$–position graph gives work; area under an $F$–time graph gives impulse.

Quick Check 3
A triangular force pulse has base $0.40$ s and height $30$ N. What impulse is delivered?
$J=\tfrac12(0.40)(30)=6.0\,\mathrm{N\,s}$.
Which area represents impulse?

4

Same Impulse, Different Force

Catching / cushioning reasoning
If the same object undergoes the same $\Delta p$, then the impulse is fixed. Increasing the interaction time reduces the average force magnitude: $$F_{avg}=\frac{|\Delta p|}{\Delta t}.$$
01234036Fnet / Nt / sAB

Equal areas mean equal impulses. Shape and peak force may differ.

AP trap: “smaller force” does not mean “smaller impulse” if the interaction lasts longer.

Quick Check 4
For the same $\Delta p$, interaction time is tripled. What happens to average force?
It becomes one-third as large.
5

4.3 · Conservation of Linear Momentum

System rule
If the net external impulse on the chosen system is negligible, $$\sum\vec p_i=\sum\vec p_f.$$ Zero net external impulse equates the endpoint momenta; momentum stays constant throughout an interval only if the net external force is zero throughout. Internal interaction forces can redistribute momentum among objects but cannot change the total momentum of the full system.
“Momentum is conserved” needs a system
For one cart during a collision, momentum usually changes because the other cart exerts an external impulse on that one-cart system. For the two-cart system, the collision forces are internal and cancel in the total momentum accounting.

Center-of-mass velocity

For a collection of objects, $$\vec v_{cm}=\frac{\sum_i m_i\vec v_i}{\sum_i m_i}=\frac{\vec p_{tot}}{M_{tot}}.$$ If net external force is zero, $\vec v_{cm}$ is constant.

60 kg−4 m/s90 kg+8/3 m/sinitial rest; system CM stationary; arrows schematic

Starting from rest gives $p_{tot}=0$, so the two objects leave with equal and opposite momenta—not generally equal speeds.

Lighter object → larger speed magnitude for the same momentum magnitude.

Quick Check 5
A $60$ kg skater moves left at $4$ m/s after pushing a $90$ kg skater. They started at rest; external horizontal impulse is negligible. Find the second skater’s velocity.
$60(-4)+90v=0\Rightarrow v=+2.67\,\mathrm{m\,s^{-1}}$.
6

1D Collision Workflow

1 · Choose + directionWrite signed velocities.
2 · Choose systemUsually both colliding objects.
3 · Check external impulseCan momentum be treated as constant?
4 · Write one momentum equation$\sum p_i=\sum p_f$.
5 · Use collision informationStick together? Rebound? Elastic?
6 · Check directionNegative answer means opposite your chosen + direction.
Worked example · perfectly inelastic

A $2$ kg cart moves right at $5$ m/s and sticks to a $3$ kg cart moving left at $1$ m/s. External horizontal impulse is negligible during contact.

Choose right positive:

$$2(5)+3(-1)=(2+3)v_f$$ $$v_f=\frac{7}{5}=1.4\,\mathrm{m\,s^{-1}}\text{ right}.$$
Momentum bars
Before collision, draw positive/negative momentum bars for each object. After collision, bars must sum to the same total when external impulse is negligible. This representation catches sign errors quickly.
Quick Check 6
A $m$ cart at $+4v$ sticks to a $3m$ cart at rest with negligible external impulse. What is the shared velocity?
$m(4v)=4mV\Rightarrow V=v$.
7

Explosions, Recoil & 2D Reasoning

Explosion model

Internal forces move parts apart. If initial total momentum is zero and external impulse is negligible, the vector sum after remains zero.

Recoil from rest

A device separates into masses $m$ and $2m$. The $m$ piece moves east at $6$ m/s.

$$0=m(6)+2m(v_2)\Rightarrow v_2=-3\,\mathrm{m\,s^{-1}}.$$

The heavier piece moves west more slowly.

Current AP1 2D boundary

Semiquantitative, not full simultaneous solving
When the external impulse in each component is negligible, momentum is conserved independently in x and y: $\sum p_{x,i}=\sum p_{x,f}$ and $\sum p_{y,i}=\sum p_{y,f}$. AP Physics 1 can ask you to set up component equations and reason how a changed mass/speed/angle affects another quantity, but not solve a full simultaneous-equation unknown-velocity problem.
+x+yp_Ap_Bmomentum components; common arrow scale

If initial y-momentum is zero, final y-components must cancel.

If one fragment gains a larger upward momentum component, the rest of the system must have a more negative y-component.

Quick Check 7
An object initially has zero y-momentum and breaks into two pieces. External vertical impulse is negligible. Piece A has $p_y=+5$ kg·m/s. What is piece B’s y-momentum?
$p_{y,B}=-5\,\mathrm{kg\,m\,s^{-1}}$.
8

4.4 · Elastic and Inelastic Collisions

CollisionTotal momentumTotal kinetic energyKey clue
ElasticConserved if external impulse negligibleConserved$K_i=K_f$
InelasticConserved if external impulse negligibleDecreasesSome K transforms to other forms
Perfectly inelasticConserved if external impulse negligibleDecreasesObjects stick and share $v_f$
“They bounced, so elastic” is false
Bouncing only means the objects separate. To call a collision elastic, compare the total kinetic energy of the system before and after.
Collision classification

Before: $K_i=24$ J. After: $K_f=18$ J. Momentum is conserved.

The collision is inelastic because total kinetic energy decreased by $6$ J. The missing mechanical energy has transformed into other forms; total energy is still conserved.

Quick Check 8
Two carts rebound and total momentum is unchanged. Is that enough to prove the collision is elastic?
No. You must also verify $K_i=K_f$.
9

Momentum + Energy: Use Them in the Right Stage

Multi-stage collision routine
During a short collision, use momentum conservation when external impulse is negligible. Before/after the collision, use energy if the relevant interactions allow it. Do not conserve kinetic energy through an inelastic collision.
before collisionjoined pairHdistinct stages; negligible rotation; schematic

Example chain: collision on table → shared horizontal speed from momentum → projectile range from Unit 1 kinematics.

This is why AP questions combine units: recognize where one model stops and another starts.

Equal masses, 1D elastic special insight

If one equal-mass cart is initially at rest and the collision is perfectly elastic in one dimension, the moving cart transfers its speed to the other cart. Treat this as a derived special case—not a universal collision rule.

Quick Check 9
Two carts stick, then slide up a frictionless ramp. Which principle handles the collision, and which handles the climb?
Momentum conservation during the collision; mechanical-energy conservation during the frictionless climb after the collision.
10

AP Lab Thinking

Experiment A · verify impulse–momentum

  1. Use a cart of known mass, force sensor, and motion sensor/photogates.
  2. Measure velocities immediately before and after a controlled interaction. Photogates report speed magnitudes; assign velocity signs from the observed motion direction. Ensure other horizontal impulses are negligible, or include them.
  3. Record horizontal force during the interaction; a contact-force sensor measures net horizontal force only when other horizontal forces are negligible.
  4. Find impulse from signed area under $F(t)$; calculate $\Delta p=m(v_f-v_i)$.
  5. Compare with uncertainty. Repeat and vary interaction shape.

Powerful conclusion: different force-pulse shapes can have the same area and therefore the same $\Delta p$.

Experiment B · unknown mass from recoil/collision data

  • Use known mass $m$ and unknown mass $M$ on a low-friction track.
  • Design trials so initial system momentum is known (often zero).
  • If a massless internal spring launches them apart with negligible external horizontal impulse, $$m v_m+M v_M=0.$$ Rearrange to a linear form.
  • For example, plot $v_m$ vertically against $v_M$ horizontally: slope magnitude $=M/m$ if directions are handled by signs.
LAB checklist
State what varies, what is measured, what is controlled, how many trials, what graph is plotted, what slope/intercept means, and how uncertainty is reduced.
Quick Check 10
A recoil graph of $v_A$ versus $v_B$ has slope $-2.5$. If $m_A=0.40$ kg, find $m_B$.
From $m_Av_A+m_Bv_B=0$, slope $v_A/v_B=-m_B/m_A$, so $m_B=2.5(0.40)=1.0$ kg.
11

AP Transfer Routines

Mathematical Routines

  1. State momentum/impulse principle.
  2. Define sign convention.
  3. Write symbolic relation first.
  4. Use collision details only after conservation setup.
  5. Check direction and units.

Translation Between Representations

  1. Force diagram / collision sketch.
  2. $F(t)$ area ↔ impulse.
  3. $p(t)$ slope ↔ net force.
  4. Momentum bars ↔ algebra.
  5. Velocity signs ↔ momentum direction.

Experimental Design & Analysis

  1. Choose measurable velocities/forces/times.
  2. Control track/friction/system.
  3. Linearize the momentum relation.
  4. Use best-fit line, not two chosen points.
  5. Discuss random/systematic uncertainty.

Qualitative/Quantitative Translation

  1. Predict before algebra.
  2. Use Newton III/impulse reasoning.
  3. Derive relation.
  4. Check functional dependence.
  5. State whether derivation supports prediction.
High-value traps
  • Using speeds without signs in 1D momentum equations.
  • Conserving momentum for a system with significant external impulse.
  • Conserving kinetic energy in every collision.
  • Confusing force–time area with work.
  • Assuming equal momenta imply equal velocities.
  • Solving a full 2D simultaneous-unknown problem beyond the AP1 boundary.
Quick Check 11
What graph feature gives net force on a $p$–$t$ graph?
The local slope gives instantaneous net force. Over a finite interval, the chord slope gives $F_{net,avg}=\Delta p/\Delta t$.
12

Unit 4 · AP Master Sheet

Core relations

IdeaRelationExam meaning
Momentum$\vec p=m\vec v$vector; direction follows velocity
Impulse$\vec J_{net}=\vec F_{net,avg}\Delta t=\Delta\vec p$external impulse changes system momentum
$F$–$t$ graph$J=$ signed areaarea gives momentum change
$p$–$t$ graph$F_{net}=$ slopeslope gives net external force
System momentum$\vec p_{tot}=\sum m_i\vec v_i$vector sum
Center of mass$\vec v_{cm}=\vec p_{tot}/M$constant if net external force is zero
Conservation$\sum\vec p_i=\sum\vec p_f$when net external impulse is negligible
Elastic test$K_i=K_f$momentum + kinetic energy conserved
Perfectly inelasticshared $v_f$stick together; K decreases
Final traps
  • momentum sign forgotten
  • external impulse ignored
  • Newton III pair drawn on one FBD
  • rebound $\Delta p$ underestimated
  • “bounce = elastic” assumption
  • momentum and energy stages mixed
Final answer check
  • system named?
  • positive direction named?
  • vector signs consistent?
  • units kg·m/s or N·s?
  • collision type justified by K, not appearance?
  • graph area/slope interpreted correctly?
Quick Check 12
A net-external-force–time graph has signed area $-9$ N·s. What is the system’s momentum change?
$\Delta p=-9\,\mathrm{kg\,m\,s^{-1}}$ in the chosen coordinate direction.