PHYSICS CREST
Physics

Topic 4.2 · Electrical Quantities

Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.

Track electrons, charge and energy separately; place each meter correctly; read every scale; then let the units choose the equation.

Charge → currentEnergy per chargeI–V evidenceMeter-and-wire ATP
celllampcharge carriesenergyelectrical transferlight + heatingsource → charge → component →surroundings
Current describes charge flow; voltage describes energy per charge; power describes energy transfer per second.
1
Start with the sign

Electric charge

  • Rubbing transfers electrons between materials.
  • Gaining electrons makes a body negative; losing electrons makes it positive.
  • Protons remain in nuclei in these ordinary processes.
  • In metals, mobile electrons allow conduction; insulators do not permit free charge movement through their bulk.
++
Like charges repel: +/+ and −/− move apart if free.
+−
Unlike charges attract: +/− move together if free.
−+−neutral overall
A charged object may attract a nearby uncharged light object, so attraction alone does not identify the sign of charge.
CHARGE LEDGERextra electronsnegativemissing electronspositiveequal + and −neutralunitcoulomb, C
Read every value and unit before selecting an equation.

Neutral does not mean “no charges”. It means equal total positive and negative charge. Positive charge usually means an object has lost electrons; negative charge means it has gained electrons.

What final sign follows from gaining electrons?
EvidenceWhat it provesWhat it does not prove
repulsionboth tested objects are charged with like signstheir exact sign without a known charge
attractionthere is an attractive electrostatic interactionthat both objects carry opposite net charge
MnemonicGAIN E− → NEGATIVE · LOSE E− → POSITIVE

Track the negative particle first; the final sign follows automatically.

Examiner wording: write “electrons are transferred”. Never say positive charge, protons or neutrons jump between rubbed objects.
Attraction trap: attraction alone does not prove that both objects carry opposite net charges. Repulsion is stronger evidence because it requires like charges on the two tested objects.
Quick Check · Can a neutral conductor contain free electrons?
Yes. Neutral means zero net charge, not zero electrons. A metal contains mobile electrons even when its total positive and negative charges balance.

Pause · explain it yourself

Why does electron gain produce negative charge?

2
Transfer, never creation

Charging by friction

clothplastic strip−−−−−+−
Electrons transferred from the cloth to the strip: strip negative, cloth positive.
material Pmaterial Q−−−−−−+
If electrons move left, P becomes negative and Q becomes positive.
Test a sample with a current-limited low-voltage circuitTest a sample with a current-limited low-voltage circuitlow-voltagesupplyAcurrent limittest sampleConductor: a measurable current. Insulator: negligible current at this voltage.
A conductor completes the low-voltage test circuit and produces a non-zero current.
conductorinsulatormobile electrons drift
Mobile electrons explain conduction; bound electrons explain insulation.
Interactive · Electron-transfer decoder

Choose the electron direction

P loses electrons → P positive; Q gains them → Q negative.
  1. Write the electron direction.
  2. The electron loser becomes positive.
  3. The electron gainer becomes negative.
  4. The two changes are equal and opposite: total charge is conserved.

Conductor

Has mobile electrons. Charge spreads and can flow to Earth through a hand or conducting support.

Insulator

Electrons are not free to travel through the material. Deposited charge remains local.

Precise correction: a conductor can retain charge if it is isolated on an insulating support. A hand-held metal rod usually loses charge to Earth.
Safe practical: use only ordinary rubbed classroom materials or a teacher-approved electrostatics kit. Keep away from sensitive electronics; never use mains equipment.
Quick Check · Why does a lamp test need a current-limiting component?
It prevents a large current if a very good conductor or an accidental short circuit bridges the test gap.
3
Arrows belong to a positive test charge

Electric fields

  • An electric field is a region where a charge experiences a force.
  • Its direction is defined by force on a positive test charge: away from positive and towards negative.
  • Between broad opposite parallel plates away from edges, field is approximately uniform.
  • A negative charge experiences force opposite the field arrow.
+
Positive point charge: radial arrows outward.
−
Negative point charge: radial arrows inward.
++++++++++
Outside a charged conducting sphere, lines are radial and normal to the surface.
+−
Opposite parallel plates: straight, parallel, equally spaced lines from + to − away from the ends.
Whose force defines field direction?
electric field = region where an electric charge experiences a force
SourcePatternArrow direction
positive point/sphereradialoutward
negative point/sphereradialinward
opposite parallel platesstraight, parallel, equal spacing+ plate to − plate
MnemonicFIELD FOLLOWS +

Imagine placing a tiny positive charge at the point. Its force direction is the field direction.

Drawing marks: field lines never cross. For the parallel-plate pattern, keep the middle lines straight, parallel and equally spaced; end effects are not required.
Negative-charge trap: a negative test charge feels force opposite to the field arrow.
Quick Check · Do field lines show literal tracks?
No. They are a model showing direction at each point. A moving charge does not have to follow a field line because its initial velocity and other forces also matter.
4
Charge per second

Electric current

  • Current I = Q/t measures charge passing a point per second.
  • An ammeter is in series with the branch.
  • Conventional current is opposite electron drift in a metal.
  • Direct current keeps one direction; alternating current reverses repeatedly.
−−−−−−−−−−−−electron drift − to +conventional current + to −
In a metal, mobile electrons carry the moving charge.
Rearranging the equationRearranging the equationQItQ = It; I = Q/t; t = Q/I
Current is charge per unit time.
CURRENT ROUTEcharge Qcoulombs, Ctime tseconds, scurrent Iamperes, ArearrangeQ = It · t = Q/I
Read every value and unit before selecting an equation.
timecurrent
A varying current can still be d.c. if it never reverses direction.
Interactive · Charge-rate engine

Calculate $I=Q/t$

I = 0.700 A
  1. Convert time to seconds.
  2. Write $I=Q/t$.
  3. Substitute with units.
  4. Sense-check: more charge in the same time means more current.
MnemonicCURRENT = CHARGE RATE

An ampere is a coulomb per second: $1\,\text{A}=1\,\text{C/s}$.

Unit gate: minutes must become seconds for the SI equation. Write the conversion as a visible method step.
Concept split: current is not “voltage flowing”. Current tracks charge rate; voltage tracks energy transferred per charge.
Quick Check · If twice the charge passes in twice the time, what happens to current?
It stays the same because the ratio $Q/t$ is unchanged.
5
Series measures through · parallel measures across

Ammeters and voltmeters

cellAcomponentV
Ammeter in series through the component; voltmeter in parallel across it.
01.53A
Example: 0–3.0 A over 30 divisions; division 18 gives 1.8 A.
timecurrent
A constant d.c. is a horizontal line on one side of zero.
timecurrent
An a.c. repeatedly crosses zero because its direction reverses.
Interactive · Analogue-scale decoder

Range ÷ divisions × pointer

one division = 0.100; reading = 1.80
InstrumentQuantityConnectionTechnique
ammetercurrentseriesstart on a safe high range, then improve resolution
voltmeterp.d.parallelconnect across the two points
MnemonicA = ALONG · V = VISITS BOTH ENDS

The ammeter sits along the current path; the voltmeter visits the two ends of the component.

Analogue reading: range ÷ total divisions = value per division. Then multiply by the pointer divisions and include the unit.
d.c. correction: d.c. means one direction. Only a constant d.c. gives a flat line; a varying d.c. can curve while remaining on one side of zero.
Quick Check · Why is an ammeter never placed directly across a cell?
It would provide a very low-resistance path and could produce a large current. Use a component/current limit and a series connection.
How should a voltmeter be connected to measure potential difference across a resistor?

6
Joules per coulomb

E.m.f. and potential difference

  • E.m.f. is source energy supplied per unit charge around a complete circuit.
  • Potential differenceEnergy transferred per unit charge between points.
  • Both have unit volt, 1 J/C.
  • Connect a voltmeter in parallel across the relevant points.
  • Components transfer energy from charges without using up charge itself.
  • Do not put an ammeter directly across a supply: its low resistance can create excessive current.
ENERGY PER CHARGEsource e.m.f.energy supplied / Ccomponent p.d.energy transferred / C1 V = 1 J/C
Both e.m.f. and p.d. are measured in volts because both are energy per charge.
batterymotore.m.f. → p.d.electrical transferkinetic + thermal
The source gives energy to charge; the component transfers it into other stores.
Rearranging the equationRearranging the equationWVQW = VQ; V = W/Q; Q = W/V
Potential difference equals work done per unit charge.
cellAmotorV
Measure p.d. between the two motor terminals using a parallel voltmeter.
Interactive · Energy-per-charge engine

Calculate $V=W/Q$

V = 12.0 V → 12.0 J transferred per coulomb.
QuantityExam definitionEquation
e.m.f.work done by source per unit charge around complete circuit$E=W/Q$
p.d.work done per unit charge passing through a component$V=W/Q$
MnemonicSOURCE SUPPLIES · DEVICE DISPATCHES

The source supplies joules to each coulomb; the device dispatches those joules to the surroundings or useful stores.

Interpret a voltage: “4.0 V across the lamp” means “4.0 J is transferred by the lamp for every coulomb passing through it.”
Name trap: electromotive force is not a force in newtons. It is an energy-per-charge quantity measured in volts.
Quick Check · A source transfers 24 J to 2 C. What is its e.m.f.?
$E=W/Q=24/2=12\,\text{V}$.

Pause · explain it yourself

A 6 V source supplies 18 J. What charge has passed?

7
Compare p.d. with current

Resistance

  • For unchanged material and temperature, wire resistance increases with length and decreases with cross-sectional area.
cellAwire XYV
Measure current through XY and p.d. across XY, then calculate $R=V/I$.
Rearranging the equationRearranging the equationVIRV = IR; I = V/R; R = V/I
Resistance in ohms equals volts divided by amperes.
long wiresmall cross-sectional area
A longer wire gives mobile electrons a longer obstructed path, so resistance is larger.
short wirelarge cross-sectional area
A larger cross-sectional area provides more parallel pathways, so resistance is smaller.
Interactive · Resistance engine

Calculate $R=V/I$

R = 30.0 Ω
Change for same materialResistance effectReasoning shortcut
length ×2R ×2$R∝L$
area ×2R ÷2$R∝1/A$
diameter ×2area ×4, so R ÷4$A∝d^2$
MnemonicLONGER = LARGER R · WIDER = WEAKER R

Apply length and area factors separately, then multiply the factors.

Experiment answer: draw the ammeter in series, voltmeter across only the test wire, quote $R=V/I$, and keep temperature controlled.
Diameter trap: resistance depends on cross-sectional area. For circular wire, doubling diameter quadruples area.
Quick Check · Same material: length ×3 and area ×2. What happens to resistance?
The resistance factor is $3/2=1.5$, so resistance becomes 1.5 times the original.
Your turn · A resistor carries 0.25 A when its potential difference is 5.0 V. Find resistance.

Decimals and scientific notation are accepted. Compatible units are accepted.

8
Shape is evidence

Current–voltage graphs

  • Resistance at an operating point is V/I.
  • A constant-temperature resistor has a straight I–V graph through the origin.
  • A lamp filament heats as current rises; increased lattice vibration raises resistance, so its I–V graph becomes less steep.
  • A diode conducts primarily in one direction under ordinary operation.
voltage, Vcurrent, Iresistor
Constant resistor at constant temperature: straight line through the origin.
voltage, Vcurrent, Ilamp
Filament lamp: heating raises resistance, so the graph becomes less steep.
voltage, Vcurrent, Idiode
Diode: almost no reverse current and a rapid forward-current rise.
voltage, Vcurrent, I
Three characteristic shapes—identify them from geometry before reading values.
Which description belongs to a filament lamp?
  1. Check which axes are used: here $I$ is vertical and $V$ horizontal.
  2. Identify shape: straight, heating curve or one-way threshold.
  3. For resistance at a point, read the coordinates and use $R=V/I$.
  4. Do not call the graph gradient “resistance” when $I$ is plotted against $V$.
MnemonicLINE · LAMP-BEND · DIODE-DOOR

Resistor gives a line, lamp bends with heat, diode acts like a one-way door.

Lamp explanation chain: current rises → filament temperature rises → ions vibrate more → resistance rises → current increases less rapidly.
Operating-point trap: even for a curved graph, resistance at one point is still $V/I$. It is not automatically the tangent gradient.
Quick Check · Why specify “constant temperature” for the resistor?
The resistance of a metal changes with temperature. A straight proportional graph assumes physical conditions, especially temperature, remain constant.
9
Rate first, total second

Electrical power and energy

  • PowerIV; energy is IVt for constant current and voltage.
power sourceheaterP = IVelectrical transferthermal energy
Power is the rate at which the component transfers electrical energy.
PIVP = IV
Electrical power is current multiplied by p.d.
EIVtE = IVt = Pt
Electrical energy equals power multiplied by time.
UNIT CHECKPwatt, W = J/sIampere, AVvolt, VEjoule, Jtsecond, s
Read every value and unit before selecting an equation.

Power route

$P=IV$. Answer in watts. It tells joules transferred each second.

Energy route

$E=IVt=Pt$. Use seconds when the answer is joules.

  1. Decide whether the question asks for a rate or a total.
  2. Use $P=IV$ for rate.
  3. Use $E=IVt$ or $E=Pt$ for total energy.
  4. Check the answer unit: W for power, J for energy.
MnemonicPOWER PER SECOND · ENERGY OVER TIME

If time enters the multiplication, the result is a total energy.

Energy chain: source store decreases → energy transfers electrically → component transfers it usefully and/or thermally to surroundings.
Current-is-used-up trap: current is not consumed by the lamp. Energy is transferred; charge continues around the circuit.
Quick Check · A 12 V, 0.50 A lamp runs for 40 s. Power and energy?
$P=IV=6.0\,\text{W}$ and $E=Pt=6.0×40=240\,\text{J}$.
10
kW × h, not W × s

Kilowatt-hours and energy bills

  • An appliance’s kW h consumption is power in kilowatts multiplied by time in hours.
  • A kilowatt-hour measures energy, not power.
ENERGY BILLpower1.2 kWtime2.5 henergy3.0 kWhtariff32 p/kWhcost96 pkW × h → kWh × tariff
Billing route: multiply kW by h, then multiply kWh by the tariff.
CONVERSION GATE750 W0.750 kW45 min0.75 henergykW × hcostkWh × rateconvert before multiplying
Convert power to kilowatts and time to hours before the kWh calculation.
ONE kWhdefinition1 kW for 1 hin joules3.6 × 10⁶ Jtypeenergy, not powerbilling unitkilowatt-hour
Read every value and unit before selecting an equation.
electricitysupplyappliancekWh over timeelectrical transferuseful + thermal
The bill counts total energy transferred, not the instantaneous power alone.
Interactive · Bill builder

kW × h × tariff

energy = 3.00 kWh · cost = 96.0 p
energy / kWh = power / kW × time / h
cost = energy / kWh × tariff
MnemonicKILO + HOUR BEFORE COST

Convert first. Then multiply in two visible stages: energy, then money.

Full-credit layout: show the W→kW conversion, min→h conversion, energy in kWh, then the tariff multiplication with pence or currency.
Name trap: kWh contains “watt” but is not power. Multiplying power by time makes energy.
Quick Check · How many joules are in 1 kWh?
$1000\,\text{W}×3600\,\text{s}=3.6×10^6\,\text{J}$.

Pause · explain it yourself

Why must minutes be converted to hours for a kW h calculation?

11
Alternative to Practical

ATP Lab Lens · Protect the circuit, control temperature, repeat, process and evaluate

Test a sample with a current-limited low-voltage circuitTest a sample with a current-limited low-voltage circuitlow-voltagesupplyAcurrent limittest sampleConductor: a measurable current. Insulator: negligible current at this voltage.
Conductor test: change only the sample and use a measurable current as the decision evidence.
cellAwire under testVA series · V parallel
Resistance method: record $I$ and $V$ at the same operating condition.
0102030405060708090100tested length / cmfixed material · diameter ·temperature
Length method: define the exact wire length between the contacts.
voltage, Vcurrent, Ilampplot I / A against V / V
I–V method: take paired readings, plot a labelled graph and explain the shape.
Apparatus

Low-voltage current-limited supply, switch, ammeter in series, voltmeter in parallel, test component and secure leads.

Variables

State independent, dependent and every factor that changes geometry, temperature or contact quality.

Processing

Repeat, calculate means, calculate $R=V/I$, and plot the graph named by both axes and units.

InvestigationIndependentDependentCritical controls
material testsample materialcurrent / lamp statesample geometry, voltage, contacts
R vs lengthwire length$R=V/I$material, diameter, temperature
I–V curvep.d.currentcomponent, range, timing/temperature protocol
Linked evaluation: “The wire warms, so resistance rises during later readings; use a lower current, close the switch briefly and allow cooling.” Limitation → physical effect → improvement.
Safe practical: use a low-voltage current-limited supply; never short-circuit it; switch off before moving leads; stop if a wire or lamp becomes too hot; keep liquids away from circuits.
Quick Check · Why repeat at each setting?
Repeats expose anomalous readings and allow a mean, improving reliability. They do not remove a systematic zero error, which must be checked separately.
12
One-page examiner logic

Master Electrical Quantities by keeping four ledgers separate: charge, energy, resistance and time

clothplastic strip−−−−−+−
Charge ledger: electron movement fixes the final signs.
−−−−−−−−−−−−electron drift − to +conventional current + to −
Direction ledger: conventional current and electron drift are opposite.
ENERGY PER CHARGEsource e.m.f.energy supplied / Ccomponent p.d.energy transferred / Csource in · component out
Energy ledger: e.m.f. supplies J/C; p.d. transfers J/C.
voltage, Vcurrent, I
Evidence ledger: graph shape identifies resistor, lamp and diode.
FINAL ROUTEcharge rateI = Q / tenergy / chargeV = W / QresistanceR = V / IpowerP = IVenergyE = IVtbillingkW × h × rateunits select the route
Final equation map—read the requested quantity and units before choosing.

1 · Track particles

Only electrons transfer; neutral means balance; a charged conductor retains charge only when it is insulated from Earth.

2 · Track direction

Field follows positive force; conventional current opposes electron drift; a.c. reverses.

3 · Track energy

e.m.f. gives J/C, p.d. transfers J/C, power gives J/s, energy totals over time.

4 · Track evidence

Meter placement, range, I–V shape, wire factors and unit conversions earn the marks.

$I=Q/t$   |   $E=W/Q$   |   $V=W/Q$   |   $R=V/I$   |   $P=IV$   |   $E=IVt$
Final chainELECTRONS · FIELD · RATE · J/C · RATIO · SHAPE · POWER · BILL

Follow that order and every diagram becomes a readable evidence map.

Final check · A device has 8 V across it, carries 0.40 A for 50 s. Find R, P and energy.
$R=8/0.40=20\,Ω$; $P=8×0.40=3.2\,W$; $E=Pt=3.2×50=160\,J$.
Interactive mastery: 0 / 8 explored

Explore all eight checkpoints, then move to the independent Practice and Exam Arena banks.