Topic 1.1 · Physical quantities and measurement techniques
Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Learn how to read a scale, measure small quantities, time complete cycles and combine perpendicular forces or velocities. Each worked example shows what to read, what to calculate and why the method works.
One topic, four visual languages: scales, differences, repeated intervals and direction.
2
Subtract · align · enlarge
Physical quantities and measuring length
Physical quantity
A measured property expressed by a numerical value and a unit.
In 7.5 cm, 7.5 is the numerical value and cm is the unit.
The number alone does not tell you the physical size.
Measuring a length
A ruler reading locates an endpoint; length is the difference between two endpoint readings.
Identify two numbered marks, subtract their values and divide by the number of equal spaces.
Count spaces rather than lines.
When one thickness is too small to read reliably, measure many identical thicknesses together and divide by their number.
For wire, tightly adjacent turns must have no gaps or overlaps.
A ruler does not measure “where the object ends.” It supplies two position readings. Their difference gives the length.
$L=L_{\text{end}}-L_{\text{start}}$
The zero mark is not required. Read both ends and subtract.
Worked: damaged zero
Start = 1.7 cm and end = 5.3 cm.
$L=5.3-1.7=3.6\text{ cm}$.
A fixed zero offset is added to both readings, so it cancels when you subtract them. This does not correct a stretched or wrongly calibrated scale.
Ruler alignment checklist
scale close and parallel to the dimension;
object edges perpendicular to the scale;
eye normal to the reading;
read the real edge, not a shadow;
quote a supported precision and unit.
For a rectangle, obtain width and height from separate pairs of readings, then multiply.
Worked: area from two rulers
Width $=8-1=7$ cm. Height $=5-1=4$ cm.
Area $=7\times4=28\text{ cm}^2$.
Technique: subtract first; multiply second.
The “measure many” superpower
If one object is too small to measure well, measure many together and divide by the count. The ruler reading uncertainty stays about the same, but the total length is larger, so the uncertainty is a smaller fraction of the measurement.
Stack method: sheet thickness = total stack thickness ÷ number of sheets.Row method: spheres must touch in a straight line with no gaps.Coil method: one layer with touching turns and no stretching. Measure the outer-edge-to-outer-edge width along the rod, then divide by the number of turns.
From total to one object
Sheets: $18.0/200=0.0900$ mm per sheet. Beads: $32.0/40=0.800$ cm per bead. Wire: $27.0/18=1.50$ mm diameter.
In each case, divide the measured total by the number of objects or turns. Keep the units of the measured total.
MnemonicM-M-D
Make many → Measure total → Divide by count.
Interactive · Offset Ruler
Move both ends
The coloured strip represents the object. Notice that its length depends on the difference, not the end reading alone.
Gaps destroy the method: if beads or turns are separated, the measured total includes empty space and the calculated diameter becomes too large.
3
Meniscus · difference · submersion
Measuring volume
Reading a liquid volume
A damaged zero need not prevent measurement if two undamaged readings can be taken.
For water in a cylinder, place it upright and view the bottom of the meniscus at eye level.
Looking from above or below introduces parallax: an apparent displacement relative to the scale.
A wide beaker usually gives less precise small-volume readings than a suitably sized cylinder.
For liquid volume, first choose a cylinder whose range contains the volume and whose divisions are fine enough. Place it upright on a level surface and let the liquid settle.
The 10 cm³ labelled gap contains five spaces, so each division is 2 cm³. The level shown is 26 cm³.Read the bottom of the concave meniscus with the eye at the same height. The correct line of sight is horizontal.
Reading routineLEVEL
Liquid settled → Eye level → Lowest point of water meniscus → Even scale spaces → Label with unit.
Only the rise in cylinder reading is the object volume. Check full submersion and trapped bubbles.
Quality checks
object completely submerged;
no trapped bubbles;
no lost or splashed water;
thin thread if needed;
read both levels consistently.
Worked
$V=67-42=25\text{ cm}^3$.
The final reading alone is not the object volume because it includes the original water.
Floating solid: cancel the sinker
Both readings must contain the same amount of water, with the sinker fully submerged. In the second reading the cork must also be fully submerged. Thin thread is assumed to displace negligible water.
Keep the water amount unchanged: if you remove a wet sinker to attach the cork, restore the initial water volume before the next trial. Do not let water spill or absorb into the object during the measurement. Use fully submerged objects and a thin thread of negligible volume.
Interactive · Cylinder Scale
Build the reading
A scale runs from 40 cm³ to 50 cm³ in 10 equal spaces. Choose the level’s division number above 40.
Diameter trap: moving the same object between narrow and wide cylinders changes the height rise, but not the displaced volume. Cylinder readings are volume, not liquid height.
Pause · explain it yourself
Why is eye-level viewing important when reading a measuring cylinder?
Compare, then improve
It reduces parallax by aligning the meniscus with the relevant scale marking. It does not eliminate the instrument’s finite resolution.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
4
Differences · intervals · cycles
Measuring time and period
Timing a complete oscillation
For a pendulum choose a reference position and a direction.
One complete oscillation ends at that same position travelling in that same direction.
The starting position represents zero completed oscillations.
Time many cycles, then divide by the number.
Repeating whole measurements and averaging improves reliability; a longer interval reduces the fractional effect of reaction-time error rather than eliminating it.
A timer display is a clock reading. The duration is the change between finish and start.
$\Delta t=t_{\text{finish}}-t_{\text{start}}$
Elapsed time = finish − start = 47.86 − 18.42 = 29.44 s. If a reading crosses a minute boundary, first convert minutes to seconds.
Sightings are not intervals
A matching sighting means the same position and direction. The first sighting starts the timer; it is not a completed interval.
$\text{intervals}=\text{matching sightings}-1$
Period of a pendulum
Start and stop at the same reference point moving in the same direction. Time many complete oscillations.
$T=\dfrac{\text{time for }N\text{ complete oscillations}}{N}$
MnemonicS-P-S-D
Start and stop at the Same Point moving in the Same Direction.
Worked
20 oscillations take 31.6 s.
$T=31.6/20=1.58\text{ s}$.
Why many cycles?
Starting and stopping by hand introduces reaction-time uncertainty. Timing many cycles makes the total interval longer, so that uncertainty is a smaller fraction of it. Divide by the number of complete cycles. This does not remove a consistently faulty timer or counting method.
The third value is inconsistent with the first two. Repeat it; do not hide it.
Interactive · Interval Counter
How many complete intervals?
Move the slider to choose the number of matching sightings.
Reliability: repeat the complete many-cycle timing and keep all raw readings. Check and repeat any result that is far from the others. Exclude a reading only for a justified reason, such as a confirmed counting mistake; then average the valid readings.
Pause · explain it yourself
A learner times ten oscillations in 18 s and reports 180 s per oscillation. Correct the reasoning.
Compare, then improve
The total contains ten periods, so divide: T = 18/10 = 1.8 s. A single period must be shorter than the total.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
5
Supplement · magnitude is not enough
Scalars and vectors
Magnitude and direction
A scalar has magnitude only; a vector has magnitude and direction.
Units are needed for both.
Mass, speed, time, energy and temperature are scalars.
Force, weight, velocity, acceleration and momentum are vectors.
A scalar has magnitude only. A vector has magnitude and direction. A unit never decides the classification by itself.
A unit does not decide the type. Ask whether changing direction changes the quantity.
Scalars
Vectors
distance, speed, time, mass, energy, temperature
force, weight, velocity, acceleration, momentum, electric field strength, gravitational field strength
Decision testM or M+D?
If a complete answer needs only magnitude, it is scalar. If it needs magnitude + direction, it is vector.
High-value traps
speed is scalar; velocity is vector;
weight is a force, so it is vector;
field strength has direction, so it is vector;
“east” without a magnitude is still incomplete.
Examiner finish
For a calculated vector, give the magnitude, unit and an unambiguous direction such as 37° north of east.
Pause · explain it yourself
Are 6 m/s east and 6 m/s west the same velocity?
Compare, then improve
No. Their speeds agree but their directions differ, so their velocities differ.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
6
Perpendicular forces and velocities
Resultant vectors
Combining perpendicular vectors
Equal speeds do not imply equal velocities if directions differ.
For perpendicular forces or velocities, draw the arrows from a common point and complete a rectangle.
Its diagonal from that point is the resultant.
Pythagoras finds its magnitude; a scale drawing or trigonometry supplies direction.
This syllabus calculation is limited to perpendicular forces or velocities, rather than arbitrary advanced vector algebra.
A resultant is the single vector with the same overall effect as the component vectors. For two perpendicular components, the vector triangle is right-angled.
For perpendicular components, use Pythagoras for magnitude and trigonometry for direction.
Tan ratio → inverse-tan Angle → state Reference direction.
Worked
$R=\sqrt{6^2+8^2}=10\text{ N}$.
$\theta=\tan^{-1}(8/6)=53.1°$ north of east.
The reference direction is part of the answer.
Measure the arrow length, then convert using the stated diagram scale.
Choose and state a sensible scale.
Draw the first arrow accurately to scale.
Draw the perpendicular second arrow head-to-tail.
Join the original tail to the final head.
Measure length and angle; convert length using the scale.
Interactive · Resultant Explorer
Change the perpendicular components
Reasonableness: a perpendicular resultant must be larger than either component but smaller than their arithmetic sum.
7
Alternative to Practical
ATP Lab Lens: make every method reproducible
Write a method another student could follow. State what to measure, how to control the conditions, how to calculate the result and how to check it.
Practical mnemonicZ-E-R-O
Zero/check the instrument → Eye level and alignment → Repeat and resolve anomalies → Organise data with headings and units.
PLANSpecify the method
apparatus, range, variables, controls, sequence and enough detail to reproduce it.
RECORDProtect raw data
headings with units, consistent precision, repeats and visible anomalies.
PROCESSTurn data into evidence
differences, means, graphs, conclusions and specific evaluation.
ATP plan A: use many sheets, record total thickness, divide by the counted number and repeat.ATP plan B: paired readings cancel the sinker volume. Keep both objects fully submerged without bubbles.
Write quantity and unit once in the heading; keep raw readings at consistent precision.
Weak phrase
Exam-ready replacement
“Measure carefully.”
Place the eye level with the meniscus to reduce parallax.
“Repeat it.”
Repeat the complete measurement at least twice more. Investigate suspected anomalies, justify any exclusion and average the valid results.
“Use better equipment.”
Use a smaller-range cylinder with finer divisions that still contains the required volume.
“Human error.”
Name the mechanism: reaction time, parallax, gaps, trapped bubbles or zero offset.
Evaluation = limitation + effect + targeted improvement. “Bubbles may increase the displaced volume, so tap the object gently and check that no bubbles remain before reading.”
Comparison technique: accuracy means closeness to a reference value; repeatability means getting similar results under the same conditions; resolution is the smallest scale division or displayed increment. Repeats help with random variation, but do not remove a fixed bias. Judge agreement using the measurement uncertainty or a stated tolerance, not an invented percentage rule.
1
See the instrument before touching the numbers
The measurement decoder
Before calculating, ask: what am I measuring, which instrument fits, and what does one scale division represent? Use the same steps for familiar and unfamiliar instruments.
Name the quantity → Choose apparatus → Decode the scale → Read correctly → Record value and unit.
Match the quantity to an apparatus, check the range and resolution, then apply the correct reading technique.
Decode one small division
Choose neighbouring labelled marks.
Find their numerical gap.
Count the equal spaces, not boundary lines.
Divide gap by spaces.
GSD: labelled Gap ÷ equal Spaces = one Division.
Record so someone else can understand
Write the quantity and unit in the heading: time / s.
Keep repeated raw readings at consistent precision.
Do not add unsupported decimal places.
Include the unit for a measured quantity. A count, such as the number of turns, has no unit.
Interactive · Scale Decoder
Can you decode any evenly divided scale?
Enter the labelled gap and the number of equal spaces.
Exam trap: six tick lines enclose five spaces. If the labelled difference is 10 units, one division is 10 ÷ 5 = 2 units—not 10 ÷ 6.
Instrument choice: choose a range large enough to contain the measurement, then prefer the finer useful resolution. A huge range with coarse divisions usually wastes precision.
8
One-page visual recall
Topic 1.1 Master Sheet
Operations
$L=L_2-L_1$
$V_{object}=V_2-V_1$
$T=t_N/N$
$R=\sqrt{x^2+y^2}$
Memory board
GSD · Gap ÷ Spaces = Division
MMD · Make many, Measure, Divide
SPSD · Same Point, Same Direction
SAR / TAR · magnitude / direction
ZERO · practical quality
If the figure shows…
Your first thought
object not starting at zero
end reading − start reading
many identical tiny objects
measure total ÷ count
two cylinder levels
final − initial
matching passes or sightings
intervals = sightings − 1
perpendicular arrows
Pythagoras + referenced direction
ATP setup
ZERO + repeats + processed evidence
Final answer scan: sensible value, correct unit, supported precision and—when the quantity is a vector—an unambiguous direction.
Interactive mastery: 0 / 5 explored
Revisit any lab you have not yet changed or answered.