Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Turn every motion story into a signed momentum ledger: calculate it, change it with impulse, conserve it across interactions and test it experimentally.
Momentum questions become manageable when direction, change and the system boundary are visible.
1
Mass in motion, with direction
Momentum
MomentumMass × velocity and has units kg m/s.
Choose a positive direction before calculating.
Motion opposite that direction has negative velocity and momentum.
Momentum is defined as mass multiplied by velocity.
$p=mv$
Mass is scalar. Velocity sets the direction of momentum.
Magnitude
Multiply mass in kilograms by velocity in metres per second.
Direction
Momentum points in the same direction as velocity because mass has no direction.
unit: $\mathrm{kg m/s}$ (equivalent to $\mathrm{N s}$)
Worked: calculate and communicate
$p=(0.75)(8.0)=6.0\mathrm{ kg m/s to the right}$.
The direction is part of a complete momentum answer.
Compare momentum by multiplying each mass by its speed. Direction matters if totals are combined.
Momentum mnemonicM × V, follow V
Multiply mass by Velocity; the momentum arrow follows the velocity arrow.
A negative result is information about direction, not a failed calculation.
Interactive · Momentum Decoder
Use a signed velocity
Definition mark: write “mass multiplied by velocity.” “Quantity of motion” or “how difficult it is to stop” may build intuition but is not the required definition.
Unit trap: if mass is supplied in grams, convert it to kilograms before calculating SI momentum.
Assessment boundary: Topic 1.6 is Supplement content. Current scope requires $p=mv$, impulse $F\Delta t=\Delta(mv)$, one-dimensional conservation of momentum, and $F=\Delta p/\Delta t$. Force–time graph area and two-dimensional momentum-vector calculations are not required here.
2
Final minus initial
Change in momentum
A change is final minus initial momentum, not the difference between their magnitudes.
A rebound can produce a momentum change larger than the incoming magnitude because the object first stops and then gains momentum in the opposite direction.
If giving a negative answer, state what your positive direction was or translate the result into a direction in words.
Write the final value first: change = final minus initial.
Change mnemonicF - I, every time
Change means final minus initial. Put signed velocities into the brackets before calculating.
Motion pattern
Signed velocity story
Meaning of $\Delta p$
speeds up right
$+u\rightarrow+v$ with $v>u$
positive
slows while moving right
$+u\rightarrow+v$ with $v<u$
negative
stops
$u\rightarrow0$
$-mu$
reverses
$+u\rightarrow-v$
direction changes; use both signs
Choose a positive direction before assigning signs to the two velocities.
Worked: rebound
Choose right as positive. Before: $u=+6.0$ m/s. After: $v=-4.0$ m/s.
$\Delta p=0.50[-4.0-(+6.0)]=-5.0\mathrm{ kg m/s}$, so the change is 5.0 kg m/s left.
For a rebound, the signed velocity changes from negative to positive (or vice versa), so speed magnitudes add in the change.
Interactive · Signed Change Calculator
Enter mass, initial velocity and final velocity
Rebound trap: do not calculate $m(u-v)$ from two unsigned speeds. A reversal crosses zero, so the change magnitude often contains the sum of the two speed magnitudes.
Quick Check · A 2.0 kg cart changes from -3.0 m/s to +1.0 m/s. What is $\Delta p$?
+8.0 kg m/s. $\Delta p=2.0[1.0-(-3.0)]=+8.0$ kg m/s, so the change is rightward.
3
Force acting through time
Impulse
ImpulseForce × duration and also equals momentum change.
For varying force, the force in this relationship is the average resultant over the interaction.
Increasing stopping time reduces average force only when the momentum change is held constant.
Padding, helmets and crumple zones extend the stopping process; they do not remove the need to change momentum.
In an explanation compare the same initial and final velocities and then identify the longer duration.
A longer interaction alone does not prove a smaller force if momentum change also differs.
Impulse is force multiplied by the time for which the force acts.
$J=F\Delta t=\Delta(mv)=\Delta p$
Exam use: when the force is constant, or an average resultant force is stated, multiply that force by the stated interaction time. Keep the direction of the force and momentum change consistent.
$1\mathrm{ N s}=1\mathrm{ kg m/s}$. Impulse and momentum change are the same physical quantity expressed from two viewpoints.Cover the quantity you need: $J=F\Delta t$, $F=J/\Delta t$, or $\Delta t=J/F$.
Constant or average force
Use the constant force, or the average resultant force over the stated interval.
Direction
Impulse has the same direction as the momentum change and resultant force.
Worked: milliseconds
$8.0\mathrm{ ms}=0.0080\mathrm{ s}$.
$J=F\Delta t=(250)(0.0080)=2.0\mathrm{ N s}$.
The object therefore changes momentum by 2.0 kg m/s in the force direction.
Interactive · Impulse Calculator
Force × time
Language precision: impulse is the change in momentum. Resultant force is the rate of change of momentum. These are not interchangeable definitions.
Time conversion: ms means milliseconds. Divide by 1000 before using seconds: $50\mathrm{ ms}=0.050\mathrm{ s}$.
Pause · explain it yourself
Why does a catcher move their hands backwards while stopping a ball?
Compare, then improve
For the same momentum change, the stopping time increases and the average force decreases.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
4
How quickly momentum changes
Force and momentum change
Resultant force is defined as the change in momentum per unit time.
$F_{resultant}=\dfrac{\Delta p}{\Delta t}$
The equation uses the resultant force and the total change in momentum over the same time interval.Write the final value first: change = final minus initial.
Worked: reversal under a resultant force
$\Delta p=0.25[4.0-(-8.0)]=3.0$ kg m/s right.
If the interval is 0.030 s, $F=3.0/0.030=100$ N right.
Mass is scalar. Velocity sets the direction of momentum.
Why this agrees with $F=ma$
For constant mass, $\Delta p=m\Delta v$. Therefore
Resultant-force trap: a named contact force is not automatically the resultant. Use the wording and diagram to decide whether other forces must be combined.
Average force: collision forces change rapidly. $\Delta p/\Delta t$ gives the average resultant force over the stated contact time, not necessarily the peak force.
5
The total transfers, not each part
Conservation of momentum
For an isolated system with no resultant external force, total momentum before equals total momentum after.
During a brief collision external impulse may be negligible even when small external forces exist.
Include both interacting objects in the system.
Their internal forces redistribute momentum.
If they stick, their common final velocity multiplies the sum of their masses.
Kinetic energy need not be conserved: internal energy and sound can increase.
Recoil from initial rest requires equal and opposite final momenta so the system total stays zero.
For a system with negligible external impulse, total momentum before an interaction equals total momentum after.
$\sum p_{before}=\sum p_{after}$
For the two-trolley system, collision forces are internal. Total momentum is conserved when external impulse is negligible.
Exam methodB-S-P-C
Boundary -> choose a Sign -> build the P-ledger -> Conserve the total.
Do not conserve each row. Conserve the signed total at the bottom.
Draw or identify the system boundary.
Choose a positive direction and sign every velocity.
Write every object's momentum before and after.
Add the signed momenta on each side.
Set the two totals equal and solve.
Translate the sign of the answer into a direction.
Choose right as positive, write a signed momentum ledger, then set total before equal to total after.
Worked: stationary target and sticking
Right positive: $(3.0)(4.0)+(1.0)(0)=(3.0+1.0)v$.
$12=4.0v$, so $v=3.0$ m/s right.
Choose right as positive, write a signed momentum ledger, then set total before equal to total after.
Worked: opposite directions
$p_{before}=(4.0)(5.0)+(2.0)(-3.0)=14$ kg m/s.
$(4.0+2.0)v=14$, so $v=2.3$ m/s right.
Interactive · Coupled-Collision Solver
Signed velocities; objects stick
Combined-mass rule: add the masses only when the objects share one final velocity. If they separate, keep two final momentum terms.
Energy distinction: total momentum can be conserved even when kinetic energy decreases and transfers to thermal energy, sound or deformation. Do not assume kinetic-energy conservation.
Pause · explain it yourself
Do identical trolleys at +3 and −3 m/s have zero total momentum?
Compare, then improve
Yes if their masses match. Their opposite momenta cancel, but their kinetic energies do not.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
6
Zero total can split into opposite parts
Recoil
Equal and opposite momentum does not mean equal speed unless the two masses are equal.
initially at rest: $m_1v_1+m_2v_2=0$
The two final momenta are equal in magnitude and opposite in direction. Their speeds are equal only when their masses are equal.
Air is part of the system. It gains backward momentum while the balloon gains forward momentum.
Balloon explanation
Before release, balloon + air has zero total momentum. Expelled air gains backward momentum; the balloon gains equal forward momentum, keeping the system total at zero if external impulse is negligible.
Force equals momentum flow rate: change in ejected momentum divided by time.
Equal-momentum trap: the lighter object has the larger speed for the same momentum magnitude.
System language: name both parts. “Momentum is conserved because forces are equal” is incomplete; state that opposite momentum changes occur within a system with negligible external impulse.
Pause · explain it yourself
Why does a launcher recoil when firing an object forwards?
Compare, then improve
Negligible external impulse leaves total momentum unchanged. The object’s forward momentum is balanced by backward launcher momentum.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
7
Alternative to Practical
ATP Lab Lens: test momentum with measurements you can defend
Measure the mass of each complete trolley, record velocity direction, and compare signed total momentum before and after.
Practical mnemonicL-M-S-R-U
Level track -> measure Masses -> record Signed velocities -> Repeat -> compare within Uncertainty.
SET UP
Low-friction level track, aligned trolleys, measured flags, gates close to the collision zone.
MEASURE
Mass including attachments; signed velocities immediately before and after.
JUDGE
Compare signed totals, repeats and uncertainty—not perfect equality by assumption.
Keep the camera perpendicular and the scale in the plane of motion to avoid parallax.
Method
Velocity evidence
Critical precaution
light gates
flag length ÷ blocking time
measure flag length and direction; place gates close to interaction
fixed video
displacement ÷ frame time
camera perpendicular; scale in motion plane; several frames
Every heading needs a quantity and unit. Record signed velocities, then calculate signed total momentum.Experimental values need not be numerically identical. Judge whether their difference is meaningful compared with uncertainty.
Conclusion language: “The before and after totals agree within experimental uncertainty, supporting conservation of momentum.” Do not claim proof from one trial.
Use the same cart and similar incoming speed so the two stopping conditions can be compared fairly.
Limitation
Effect
Targeted improvement
track not level
external gravitational component changes momentum
adjust until a stationary cart has no preferred motion
friction
external impulse between velocity readings
use low-friction track and gates close to collision
only one trolley measured
system total cannot be calculated
measure both trolleys before and after
camera angled
distance scale distorted by parallax
camera perpendicular and scale in same plane
one trial
random spread hidden
repeat each condition and compare mean plus range
Variables: change one initial speed or mass combination; measure total momentum before/after; control track slope, trolley attachments, collision type and measurement positions.
8
One-page visual recall
Topic 1.6 Master Sheet
Momentum questions become manageable when direction, change and the system boundary are visible.
Equation bank
$p=mv$
$\Delta p=m(v-u)$ (constant mass)
$J=F\Delta t=\Delta p$
$F=\Delta p/\Delta t$
$\sum p_{before}=\sum p_{after}$
Memory board
M × V, follow V · momentum
F - I · change
F × t · impulse from stated force and time
BSPC · conservation routine
LMSRU · ATP method
$1\mathrm{ N s}=1\mathrm{ kg m/s}$. Impulse and momentum change are the same physical quantity expressed from two viewpoints.Choose right as positive, write a signed momentum ledger, then set total before equal to total after.
If the question shows…
Your first move
mass and velocity
choose direction, then $p=mv$
before and after velocity
write signs; use $m(v-u)$
force and contact time
convert time; use $F\Delta t$
collision
draw system and signed before/after ledger
objects stick
use combined mass with one common velocity
recoil from rest
final momenta add to zero
experiment
measure both masses and all signed velocities
Final answer audit: kilograms? seconds? signed velocity? final minus initial? correct system? combined mass only if together? N s or kg m/s? direction written in words?
Interactive mastery: 0 / 5 explored
Use each explorer once, then revisit any method that still feels slow.