PHYSICS CREST
Physics

Topic 2.1.1 · States of Matter

Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.

Read matter like an examiner: use shape, volume, flow and compressibility as evidence—then trace each state-change arrow from start to finish.

Core state propertiesState-change languageATP observation skillsInteractive notebook
Particle model: arrangement, separation and motionParticle model: arrangement, separation and motionsolidliquidgasSame 24 particles; schematic positions; not to scale.
Three states, three distinct patterns of macroscopic behaviour.
1
Observe before naming

Identifying states of matter

The three states are solid, liquid and gas. In exam questions, identify the state from evidence about shape, volume, flow and compressibility.

Particle model: arrangement, separation and motionParticle model: arrangement, separation and motionsolidliquidgasSame 24 particles; schematic positions; not to scale.
The particle pictures are a preview; this subtopic focuses first on observable properties.
PROPERTY EVIDENCEstateshapevolumecompressionsolidfixedfixedvery difficultliquidcontainerfixedvery difficultgasfills containernot fixedeasy
Use the whole row. One property alone may be shared by more than one state.
Shape and occupied volume are different propertiesShape and occupied volume are different propertiessolidliquidgas
Shape and volume evidence distinguishes the three states.
Exam mnemonicS-V-F-C

Shape → Volume → Flow → Compressibility. Check all four before committing.

EVIDENCE BUNDLEsamplechanges shapeoccupied volumeunchangedflowyescompressionvery difficult
At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.
Classify the sample in the evidence panel.
High-value sentence: “The sample is a liquid because it changes shape to match the container but keeps a fixed volume and is very difficult to compress.” Evidence earns the mark.
Appearance trap: glass can be transparent and rigid; coloured water can look like a solid patch in a drawing. Use the stated properties, not colour or name.
Scope guard: identify states here from observable shape, volume, flow and compressibility. Particle diagrams are formally developed in Topic 2.1.2.
2
Fixed shape · fixed volume

Solids

  • Solid particles still move: they vibrate near fixed positions.
  • Avoid calling a solid completely motionless at particle level.
  • In solids they remain near fixed positions.
Particle model: arrangement, separation and motionParticle model: arrangement, separation and motionsolidSame 24 particles; schematic positions and motion arrows, not to scale.
Closely packed particles help a solid keep a fixed shape and volume; detailed particle reasoning comes in 2.1.2.
Shape and occupied volume are different propertiesShape and occupied volume are different propertiessame solid shapesame solid shapesame solid shape
Moving a solid does not make it copy the container shape.

Shape

Fixed. A solid does not normally adopt the outline of its container.

Volume

Fixed. It occupies approximately the same amount of space.

SOLID PROPERTY ROWstateshapevolumecompressionsolidfixedfixedvery difficult
“Very difficult to compress” is safer than the absolute word “impossible”.
SOLID CHECKflows?no, ordinarilyfixed shape?yesfixed volume?yescompressed easily?no
At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.
Choose the complete solid description.
Ordinary conditions: state properties describe typical behaviour on the scale of the question. A powder can be poured, but each grain is still a solid.
Quick check · Sand takes the shape of a bucket. Has each grain become liquid?
No. The pile rearranges because separate solid grains move past one another; each grain retains solid properties.
3
Container shape · fixed volume

Liquids

  • In liquids they are close but move past neighbours.
Particle model: arrangement, separation and motionParticle model: arrangement, separation and motionliquidSame 24 particles; schematic positions; not to scale.
The particles remain close but can rearrange; the detailed explanation follows in 2.1.2.
Shape and occupied volume are different propertiesShape and occupied volume are different propertiesnarrow: deeperwide: shallowersame liquidsame volumeNone spilled: changing shape does not change the liquid volume.
The liquid changes outline while its amount and volume stay the same if none is lost.
liquid: no fixed shape + fixed volume + flows + very difficult to compress
LIQUID PROPERTY ROWstateshapevolumecompressionliquidcontainerfixedvery difficult
Use observable properties to identify the state.
Compare compression with the same initial volume and loadCompare compression with the same initial volume and loadP · waterinitialno visible changeQ · airinitialsmaller volumeBoth samples stay inside capped barrels. Compare the plunger movement.
Compare compressibility using safe prepared apparatus.
Which property separates a liquid from a gas?
Comparison sentence: both liquids and gases flow and take the container shape, but only the liquid keeps a fixed volume.
Free-surface clue: a liquid normally occupies the lower part of a vessel and has a surface. A gas occupies the available vessel, not only the bottom.
Which statement describes a liquid?

4
No fixed shape · no fixed volume

Gases

  • In gases they are far apart and move between collisions.
Particle model: arrangement, separation and motionParticle model: arrangement, separation and motiongasSame 24 particles; schematic positions; not to scale.
Large particle separations allow a gas volume to change greatly; the mechanism is developed in 2.1.2.
Shape and occupied volume are different propertiesShape and occupied volume are different propertiesvalve closedvalve openedA fixed gas sample spreads into connected available space.
Gas spreads through connected available space.
gas: no fixed shape + no fixed volume + flows + readily compressed
Compare compression with the same initial volume and loadCompare compression with the same initial volume and loadP · airinitialsmaller volumeQ · waterinitialno visible changeBoth samples stay inside capped barrels. Compare the plunger movement.
Compare compressibility using safe prepared apparatus.
GAS EVIDENCEshapecontainer shapevolumeavailable containerflowyescompressionreadily
At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.
What does gentle compression mainly change?
Do not say “gas has no volume.” Say gas has no fixed volume; it occupies the volume available to it.
Visibility trap: most gases are invisible. A visible cloud often consists of tiny liquid droplets or solid particles suspended in a gas.

Pause · explain it yourself

Why are large gaps shown in a gas particle diagram?

5
One table defeats most traps

Comparing solids, liquids and gases

  • A solid has its own shape and nearly fixed volume.
  • A liquid takes the shape of the occupied part of its container while keeping nearly the same volume.
  • A gas spreads through available space and has neither its own fixed shape nor fixed volume.
  • Both liquids and gases can flow, so flow alone does not distinguish them.
  • A gas compresses much more readily because its particles are widely separated.
  • The particles of a substance retain their identity when its state changes.
  • Bulk properties emerge from many particles interacting.
  • A dot is a model symbol rather than a photograph, and a liquid particle is not a tiny liquid droplet with all the properties of a bulk sample.
  • Keep particle size distinct from interparticle distance and compare arrangements rather than interpreting schematic diagrams as exact scale drawings.
Particle model: arrangement, separation and motionParticle model: arrangement, separation and motionsolidliquidgasSame 24 particles; schematic positions; not to scale.
Use the diagrams with the property table; particle patterns alone are not yet the full explanation.
PROPERTY EVIDENCEstateshapevolumecompressionsolidfixedfixedvery difficultliquidcontainerfixedvery difficultgasfills containernot fixedeasy
This four-column matrix is the fastest classification tool.
Compare compression with the same initial volume and loadCompare compression with the same initial volume and loadP · waterinitialno visible changeQ · airinitialsmaller volumeBoth samples stay inside capped barrels. Compare the plunger movement.
Compare compressibility using safe prepared apparatus.
Shape and occupied volume are different propertiesShape and occupied volume are different propertiessolidliquidgas
Shape and volume evidence distinguishes the three states.
ObservationSolidLiquidGas
fixed shapeyesnono
fixed volumeyesyesno
flowsnoyesyes
readily compressednonoyes
Which row describes a liquid?
Classification ladderSHAPE → VOLUME → SQUEEZE

Fixed shape? Solid. If not, fixed volume? Liquid. If neither and readily compressed? Gas.

Shared-property warning: “it flows” narrows the answer to liquid or gas; add fixed-volume or compression evidence to finish.

Pause · explain it yourself

Why does a sealed water-filled syringe resist compression much more than an air-filled one?

6
Read every arrow by direction

Changes of state

  • Melting is solid to liquid; solidification is liquid to solid.
  • Boiling and evaporation take liquid to gas; condensation takes gas to liquid.
  • Draw arrows between states if a name feels uncertain.
  • For a pure substance at fixed pressure, melting and solidification have the same characteristic temperature.
  • Water melts at 0 °C and boils at 100 °C at standard atmospheric pressure.
  • These values are not universal for every substance or pressure.
  • A change of state changes physical arrangement, not chemical identity.
  • Invisible water vapour must be distinguished from visible droplets.
SOLIDLIQUIDGASmeltingfreezing /solidificationvaporisationcondensationsolid ↔ liquid ↔ gasonly
The required routes are solid ↔ liquid and liquid ↔ gas.

Solid ↔ liquid

Melting: solid → liquid.
Freezing / solidification: liquid → solid.

Liquid ↔ gas

Vaporisation: liquid → gas.
Condensation: gas → liquid.

SOLIDLIQUIDGASsolid ↔ liquid ↔ gasonly
Hide the labels and name each arrow from its direction.
VAPORISATION HAS TWOFORMSboilingliquid → gasevaporationliquid → gas
At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.
Shape and occupied volume are different propertiesShape and occupied volume are different propertiessolidliquidgas
Always identify the starting and finishing states before naming the process.
Select the direction for condensation.
Direction mnemonicCONdense comes DOWN to liquid

Vaporisation climbs from liquid to gas; condensation returns from gas to liquid.

Scope boundary: do not add a direct solid ↔ gas route here. It is not required for this syllabus point.

Pause · explain it yourself

An ice cube becomes water, then freezes again. Name the two changes.

8
Alternative to Practical

Make compressibility evidence fair, measurable and safe

Compare compression with the same initial volume and loadCompare compression with the same initial volume and loadP · waterinitialno visible changeQ · airinitialsmaller volumeBoth samples stay inside capped barrels. Compare the plunger movement.
Compare compressibility using safe prepared apparatus.
  1. Use identical, pressure-rated, needle-free syringes prepared by the teacher.
  2. Set equal initial sample volumes and record initial plunger positions.
  3. Apply the same modest load for the same time.
  4. Measure plunger displacement or volume decrease.
  5. Repeat after resetting; calculate means and compare spread.
  6. Conclude only for the tested conditions.
RESULTS TABLEsampleair / waterinitial volume / cm³recordfinal volume / cm³recorddecrease / cm³calculate
At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.
Shape and occupied volume are different propertiesShape and occupied volume are different propertiessolidliquidgas
A fair comparison changes the material state while controlling the apparatus and loading.
ProblemEffectTargeted improvement
air bubble in waterextra displacement falsely attributed to liquidfill slowly and remove visible bubbles
different plunger frictionmotion differs for apparatus reasonuse matched syringes and swap/repeat
force judged by handuncontrolled forceuse the same modest measured load
apparatus not fixedpoor position readingsclamp securely and read ruler at eye level
Safety: keep pressure low, use capped needle-free apparatus, secure it, keep faces out of the plunger line and follow teacher supervision. Never heat a sealed gas sample.
Evaluation formula: exact limitation → effect on measured displacement → specific improvement.
7
Examiner language engine

Build property and state-change answers in the order marks are awarded

UNKNOWN Xstateshapevolumecompressionunknowncontainerfixedvery difficult
Use observable properties to identify the state.
SOLIDLIQUIDGASsolid ↔ liquid ↔ gasonly
Question technique: point to the start, follow the arrow, name the finish.
THREE ANSWER ROUTESidentify a statename + two propertiescompare statesshared + differentpropertyname a changestart → finish → term
At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.
Compare compression with the same initial volume and loadCompare compression with the same initial volume and loadP · airinitialsmaller volumeQ · waterinitialno visible changeBoth samples stay inside capped barrels. Compare the plunger movement.
Compare compressibility using safe prepared apparatus.
  1. Underline the observation or arrow direction.
  2. Name the state/process.
  3. Quote the exact property evidence.
  4. Use comparative wording: fixed/no fixed, readily/very difficult.
  5. Check that your explanation does not simply repeat the question.
Choose the strongest two-mark identification.
Two-mark pattern: conclusion + evidence. For example, “Y is a gas because it has no fixed volume and fills the available container.”
Word-pair trap: fixed shape does not mean fixed position; fixed volume does not mean the liquid cannot be poured.
9
Last-minute examiner sheet

States of Matter Master Sheet

Particle model: arrangement, separation and motionParticle model: arrangement, separation and motionsolidliquidgasSame 24 particles; schematic positions; not to scale.
Solid: fixed shape/volume · Liquid: fixed volume · Gas: fills available volume.
PROPERTY EVIDENCEstateshapevolumecompressionsolidfixedfixedvery difficultliquidcontainerfixedvery difficultgasfills containernot fixedeasy
Memorise the contrasts, then use the question evidence.
SOLIDLIQUIDGASmeltingfreezing /solidificationvaporisationcondensationsolid ↔ liquid ↔ gasonly
Use solid ↔ liquid ↔ gas change names only; direct solid ↔ gas changes are not required.
FINAL TRAPSgasno fixed volume, not“no volume”liquidflows but fixed volumecompressionvery difficult ≠impossiblearrowsread start → finish
At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.

Property answer

State + evidence: “liquid because it changes shape but keeps fixed volume.”

Process answer

Direction + term: “gas → liquid, so condensation.”

Final stripS-V-F-C · START → FINISH

Use properties to identify states and direction to name changes.

Final check · What is the reverse of vaporisation?
Condensation: gas changes to liquid.
Interactive mastery: 0 / 7 explored

Complete the seven checkpoints, then move to original Practice questions.