Skip to lesson
PHYSICS CREST · 2.2.1 Thermal ExpansionMeaningThree statesParticlesApplicationsExam method
1

2.2.1 Thermal Expansion

Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.

Solids, liquids and gases · applications · particle explanation

Thermal expansion

  • Most materials expand on heating and contract on cooling in the situations considered here.
  • Solids change length, area and volume; liquids change volume; gases can expand strongly if their boundary can move at constant pressure.
Core idea
When a substance is heated at constant pressure, it normally expands. When cooled, it normally contracts.

Expansion means the substance takes up more space. A freely expanding solid grows slightly in every dimension. A liquid increases in volume. A gas can increase greatly in volume when its boundary is free to move.

Exam trap
The particles themselves do not get bigger. Heating changes their motion and average separation.
Metal plate heated freelyWhat happens to the plate and the hole?
Schematic; not to scale.
Quick Check 1
A metal plate has a circular hole. It is heated uniformly and is free to expand. What happens to the hole?
The hole becomes larger because the whole shape expands.
2

Comparing expansion

  • For comparable starting volumes and temperature increases at constant pressure, gases generally expand most, then liquids, then solids.
Same temperature rise at constant pressuresolidliquidgasWhich state normally expands the most?
Particle spacing is schematic.
StateRelative expansion for the same temperature rise at constant pressure
Gasgreatest
Liquidintermediate
Solidsmallest
Memory hook
G > L > S — gas, liquid, solid.

This is a qualitative comparison. No numerical expansion formula is required here.

Quick Check 2
Equal starting volumes of a solid, liquid and gas are warmed through the same temperature rise at constant pressure. Which normally expands most?
The gas.
3

Particle explanation of expansion

  • In a solid, increased vibration generally increases average separation slightly.
  • Liquid particles move more vigorously and their separation generally increases.
  • Gas particles can become much farther apart when expansion is allowed.
  • No numerical expansion-coefficient formula is needed here.

Solid: particles vibrate more vigorously and their average separation increases slightly.

Liquid: particles move more vigorously and remain close, but their average separation increases.

Gas at constant pressure: particles move faster. If the boundary can move, the gas occupies a larger volume and the particles become farther apart.

Metal rod expansion testpointerheat evenly and compare pointer positions
For a fair material comparison, use the same initial length and temperature rise.
Exam-ready wording
Write “particles move/vibrate more vigorously and their average separation increases”, not “the particles expand”.
Quick Check 3
Why does a solid expand much less than a gas for the same temperature rise?
Solid particles remain strongly linked near fixed positions, while gas particles can become much farther apart.

Pause · explain it yourself

Why is saying particles expand an incorrect explanation?

4

Applications of expansion

  • A freely moving end lets a heated rod lengthen.
  • If both ends are rigidly fixed, prevented expansion can produce stress and buckling instead.
  • Bridges use movement joints and sliding supports; overhead wires sag more when warm and tighten when cool.
  • Boundary conditions matter for gases too.
  • A rigid sealed container cannot increase its gas volume; heating raises pressure instead.
  • A gas under a freely moving piston with a constant load can expand at approximately constant pressure.
  • Naming the container constraint is part of the explanation, not a minor detail.
  • A liquid thermometer depends on liquid expanding more than its glass container.
  • The extra liquid volume moves along a narrow calibrated tube.
  • A narrow tube gives a larger visible rise for a small volume change.
  • A bimetal strip bonds two metals that would expand by different amounts for the same temperature rise.
  • Because they cannot slide independently, the strip bends.
  • The metal expanding more becomes the outer side of the curve.
  • A thermostat uses the movement to operate a switch.
  • Describe temperature, movement and circuit effect in order rather than memorising an arbitrary leftward bend.
Expansion gapgapThe rails become warmer.
Schematic; not to scale.
SituationWhy expansion matters
Bridge / railway jointsroom for expansion reduces buckling or damage
Overhead wireswires expand and sag more when hot
Metal jar lidwarming increases the opening slightly
Liquid-in-glass thermometerliquid expands relative to glass and rises in the tube
Bimetallic thermostattwo bonded metals expand by different amounts, so the strip bends
Liquid expansion in a narrow tubeliquid levelThe liquid and glass are warmed.
Schematic; not to scale.
Boundary condition
A rigid sealed gas cannot increase its volume. Heating it changes pressure instead.
Quick Check 4
Why are small gaps left between long sections of railway track?
The rail expands when hot. The gap provides room for expansion and reduces buckling.

Pause · explain it yourself

Why are expansion gaps useful in long bridges?

Pause · explain it yourself

Why does a narrow thermometer tube improve sensitivity?

Why are expansion gaps provided in long structures?

5

Thermal-expansion review

Three-step explanation
temperature rises → motion/vibration increases → average separation increases → expansion

Worked example — tight lid

Hot water warms a metal lid. The lid expands and the circular opening becomes slightly larger, so it can loosen on the jar.

Worked example — states

A gas expands much more than a solid because gas particles are far apart and can become much farther apart. Solid particles remain strongly linked near fixed positions.

Final checklist

·