PHYSICS CREST
Physics

Topic 3.1 · General Properties of Waves

Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.

Track what travels, read the diagram like an examiner, measure over several cycles, then use $v=f\lambda$ and the wavefront rules to predict every pattern.

Core wave languageWave equationSupplement diffractionRipple-tank ATP
Reflection · refraction · diffractionReflection · refraction · diffractionreflectionslower medium belowdiffraction
Three boundary patterns, one wave-language toolkit.
1
The idea underneath every wave

Energy transfer by waves

  • A crest can travel along a rope while each small rope section oscillates around equilibrium.
  • Energy travels without continuous bulk transport of the rope.

A wave is a travelling disturbance that transfers energy from place to place. It does not carry the material of the medium along with the disturbance.

pulse and energy moverightmarkers rise/fall, thenreturn
Follow one marker: it moves locally while the pulse moves on.
disturbance travelsone point oscillatesno overall mattertransfer
In a transverse wave, vibration is perpendicular to propagation.
measure a long time tcount many completeoscillationsf = number of waves /time
Count many cycles in a measured time to reduce percentage uncertainty.
ENERGY–MATTER DECODERtravelling featuredisturbance / energymedium particleoscillates locallyafter the train passesnear starting positionoverall matter transfernone
Use the labelled data with the question.
A cork bobs as ripples pass and stays near the same horizontal place. What travelled across the tank?
MnemonicWAVE GOES · WATER WIGGLES

The pattern moves on; each small part of the medium returns.

Examiner sentence: “The wave transfers energy, while particles oscillate about equilibrium with no net transfer of matter.”
Language trap: do not write “particles do not move.” They do move—back and forth or up and down—but do not travel overall with the wave.
2
Name it before calculating it

Wave language

distancedisplacementAλPQR
A displacement–distance profile: amplitude is vertical; wavelength is horizontal.
distancedisplacementA
Crest-to-trough height is twice the amplitude.
propagation normal
In plan view, adjacent crest wavefronts are one wavelength apart.
Circular wavefronts still join points at the same stage of the wave.

Profile language

Crest/peak: maximum positive displacement.
Trough: maximum negative displacement.
Amplitude $A$: maximum displacement from equilibrium.

Repeat language

Wavelength $\lambda$: shortest separation of adjacent points at the same stage of the repeating wave.
Wavefront: line joining points at the same stage of oscillation.

A crest is 10 cm vertically above its adjacent trough. What is the amplitude?
MnemonicA = AWAY FROM THE AXIS

Equilibrium to peak—not peak to trough.

One-wavelength pairs: crest-to-next-crest, trough-to-next-trough, compression-to-next-compression.
Half-cycle trap: crest to adjacent trough is $\lambda/2$ horizontally and $2A$ vertically.
3
Measure long · count intervals · divide

Amplitude and wavelength

  • AmplitudeMaximum displacement from equilibrium, not total crest-to-trough height.
  • WavelengthDistance between consecutive points in phase, such as adjacent crests or compression centres.
  • A wavefront joins points in the same phase.
  • Show separate arrows for particle vibration and propagation to make the model clear.
012345distance across 5wavelengthsλ = total distance ÷ 5
Measure several complete wavelengths, then divide.
time 20–50 cyclesN complete cyclesf = N / t
Count many cycles in a measured time to reduce percentage uncertainty.
distancedisplacementλ
Distance axis: horizontal repeat gives wavelength.
  1. Choose two well-defined corresponding points far apart, such as crest to crest.
  2. Count the intervals, not just the visible crests.
  3. Measure perpendicular to wavefronts and read the scale at eye level.
  4. Divide the total by the number of wavelengths.
  5. Repeat at several positions and average.
Which timing method gives the more reliable value of frequency?
RecordMeasureProcess
distance profileseveral complete wavelengths$\lambda=\text{total distance}/N$
timing record$N$ complete oscillations in time $t$$f=N/t$
ATP precision: a 2 mm ruler uncertainty is large for one tiny wavelength but much smaller as a percentage when spread across five or ten wavelengths.
Crest count trap: six crests from first to last contain five complete crest-to-crest intervals.
4
Units first · equation second

Frequency, period and wave speed

  • FrequencyComplete oscillations per second in hertz; period is time per oscillation.
  • A wave moves one wavelength during one period, giving v = fλ.
  • A displacement–distance graph shows wavelength, while a displacement–time graph at one position shows period.
  • Similar-looking curves therefore contain different information.
  • FrequencySet by the source; speed depends on medium and wave type.
  • Read horizontal units and convert lengths before calculating.
  • An amplitude change alone need not change frequency, speed or wavelength in the ideal model.
vfλv / m s⁻¹ · f / Hz · λ /m
Cover the required quantity to select the rearrangement.
$v=f\lambda$    $f=\dfrac{v}{\lambda}$    $\lambda=\dfrac{v}{f}$
WORKED ROUTEfrequencyf = 8.0 Hzwavelengthλ = 6.0 cm = 0.060 mspeedv = (8.0)(0.060)answer0.48 m/s
Use the labelled data with the question.
distancedisplacementλ
Extract the spatial repeat before substituting.
60 s = 1 min150 waves each minutef = 150 / 60 = 2.5 Hz
Count many cycles in a measured time to reduce percentage uncertainty.
Interactive · Wave Equation Lab

Calculate wave speed

v = 1.20 m/s

Three-mark calculation rhythm

Convert: $6.0\text{ cm}=0.060\text{ m}$.

Substitute: $v=(8.0)(0.060)$.

Finish: $v=0.48\text{ m/s}$.

MnemonicV = FREQUENCY × LENGTH

Then sense-check: at fixed speed, a higher frequency must mean a shorter wavelength.

Unit traps: cm ÷ 100, mm ÷ 1000, kHz × 1000, and waves per minute ÷ 60.

Pause · explain it yourself

What happens to wavelength if frequency doubles at fixed wave speed?

Your turn · Find wave speed for frequency 8.0 Hz and wavelength 0.25 m.

Decimals and scientific notation are accepted. Compatible units are accepted.

5
Compare two arrows

Transverse and longitudinal waves

  • For a transverse wave, vibration is perpendicular to propagation; for longitudinal, it is parallel.
propagation →vibration ↕right angle: transverse
In a transverse wave, vibration is perpendicular to propagation.
propagation →vibration ↔compressionrarefaction
Compressions and rarefactions travel while coils oscillate parallel to propagation.
transverse modellongitudinal model
Compare vibration direction with propagation direction.
SYLLABUS MODELStransverseelectromagnetic radiationtransversesurface water waves ·S-waveslongitudinalsound waves · P-wavestestcompare vibration withtravel
Use the labelled data with the question.
Particles vibrate left–right while the wave also travels left–right. Classify the wave.
MnemonicT = ACROSS · L = ALONG

Transverse vibration goes across the travel line; longitudinal vibration goes along it.

Longitudinal wavelength: measure compression-centre to next compression-centre, or rarefaction-centre to next rarefaction-centre.
Water-wave scope: in this topic, surface water waves are modelled as transverse. Do not replace the required model with a more advanced particle-orbit discussion.

Pause · explain it yourself

How do vibration directions differ in transverse and longitudinal waves?

6
Same medium · new direction

Reflection

  • Reflection redirects waves at a boundary.
Incident and reflected propagation directions are symmetric about the normal.
Construction task: continue equally spaced reflected fronts.
propagation normal
Wavefronts remain perpendicular to their propagation arrows.
REFLECTION AUDITdirectionchangesfrequencyunchangedspeedunchangedwavelengthunchanged
Use the labelled data with the question.
A ripple reflects from a fixed barrier in one water depth. Which listed item changes?
  1. Draw a normal at the contact point.
  2. Reflect the propagation direction symmetrically about the normal.
  3. Draw straight wavefronts perpendicular to that direction.
  4. Keep the incident wavelength spacing.
MnemonicREFLECT = REDIRECT

No medium change means no speed or wavelength change.

Drawing trap: reflected wavefronts do not crowd together at the barrier; keep them parallel and equally spaced.
7
Speed change at a boundary

Refraction

  • Refraction follows a change of speed; direction can change at oblique incidence.
  • Frequency stays the same across a boundary, so lower speed gives shorter wavelength.
  • In a ripple tank, shallower water slows water waves.
  • At normal incidence, refraction can change speed without changing direction.
region Jregion K
Deep to shallow: slower waves, closer fronts and bending towards the normal.
region Jregion K
Normal incidence: spacing changes but the travel direction does not.
DEEP → SHALLOWfrequency funchanged: source-setspeed vdecreaseswavelength λdecreasesdirectiontowards normal if oblique
Use the labelled data with the question.
SHALLOW → DEEPfrequency funchangedspeed vincreaseswavelength λincreasesdirectionaway from normal ifoblique
Use the labelled data with the question.
Oblique water waves enter a shallower region. Choose the correct front spacing and frequency statement.
source fixes $f$  ·  medium fixes $v$  ·  then $\lambda=v/f$
MnemonicSLOWER → SHORTER → TOWARDS

For water waves entering shallow water: speed down, wavelength down, bend towards the normal.

Cause: refraction happens because wave speed changes. Turning is a possible result, not the definition.
Normal-incidence trap: no turning does not mean no refraction. Speed and wavelength still change at the depth boundary.
A wave crosses into a region where it travels more slowly. Its source frequency stays constant. What happens to wavelength?

8
Relative size controls spreading

Diffraction

  • Diffraction is spreading at an edge or through a gap.
  • It is stronger when a gap is comparable to wavelength.
  • For a fixed gap, longer wavelengths spread more; for fixed wavelength, reducing a very wide gap towards that wavelength increases spreading.
gap comparable with λ
A narrow opening produces strongly curved outgoing fronts.
gap several λ wide
A wide opening gives mostly straight fronts with edge curvature.
larger λ / gapsmaller λ / gap
The relative sizes of wavelength and opening control the spreading.
longer λ → greater edgespreading
At an obstacle edge, part of each wavefront spreads into the shadow region.
greater diffraction ⇔ larger $\dfrac{\lambda}{\text{gap or obstacle scale}}$
Interactive · Diffraction Ratio

Change the gap width

λ / gap = 1.00 · pronounced spreading
Change$\lambda/$gapSpreading
narrower gapincreasesincreases
longer wavelengthincreasesincreases
wider gapdecreasesdecreases
MnemonicSIZE MATCH → BIG SPREAD

Pronounced diffraction occurs when wavelength is comparable with or larger than the opening.

Same-medium audit: diffraction changes front shape and directions; frequency, speed and wavelength remain unchanged.
Absolute-rule trap: diffraction is not an on/off event only at exact equality. It increases continuously as wavelength becomes larger relative to the gap or edge scale.

Pause · explain it yourself

Why do long waves spread more than short waves through the same opening?

9
Alternative to Practical

Ripple-tank answers need method, measurement, controls and a clean pattern

lamp abovestraight vibrating dipperscreen below tankuniform shallow water ·low amplitude
A ripple tank makes water-wave patterns visible for measurement.
shallow plate regionsame f · compare λ anddirection
Use one controlled change and a fixed observation method.
Reflection setup: barrier at an angle to straight incident fronts.
region Jregion K
Refraction setup: an oblique shallow-plate boundary.
measured narrow gapmeasured wide gap
Diffraction test: change gap width while holding wavelength fixed.

Reliable wavelength

Photograph a steady pattern. Measure perpendicular to the fronts over at least five wavelengths, divide, repeat and average.

Reliable frequency

Count many waves in a timed interval or use a calibrated generator. Write $f=N/t$.

InvestigationIndependent variableKeep constantObserve
refractionwater depthsource frequencyspacing / direction
gap diffractiongap width or wavelengththe other, depthcurvature / spread angle
reflectionbarrier orientationdepth and frequencyfront directions
Safety: use low-voltage school equipment, keep water away from electrical connections, dry spills promptly and switch off before moving the dipper, plate or barriers.
Evaluation pattern: name the measurement problem, say how it affects the result, then give a specific improvement—“photograph and measure across many fronts” is stronger than “be more careful.”
10
Last-minute examiner sheet

General Properties of Waves Master Sheet

distancedisplacementAλ
Profile decoder: amplitude vertical, wavelength horizontal.
vfλv = fλ · convert to SIfirst
Cover the required quantity to select the rearrangement.
vibration ⟂ travelvibration ∥ travel
Compare vibration direction with propagation direction.
Reflection · refraction · diffractionReflection · refraction · diffractionreflectionslower medium belowdiffraction
Identify the process from the boundary and wavefront pattern.
QUANTITY AUDITreflectiondirection changesrefractionv and λ change · f fixeddiffractionspreading changessame mediumv, f and λ fixed
Use the labelled data with the question.

Definitions worth exact wording

Amplitude: maximum displacement from equilibrium.
Frequency: complete oscillations per second.
Wavelength: shortest distance between adjacent points at the same stage of the repeating wave.
Wavefront: line joining points at the same stage of oscillation.

Calculation route

Convert → choose $v=f\lambda$ → substitute → unit → sense-check.

Drawing route

Direction first → fronts perpendicular → equal spacing → smooth pattern.

Final stripENERGY, NOT MATTER · A FROM AXIS · $v=f\lambda$ · ⟂ / ∥ · R-R-D

Reflection redirects; refraction changes speed; diffraction spreads.

Final check · What remains constant when water waves enter shallower water?
Frequency, because it is fixed by the source. Speed and wavelength decrease.
Interactive mastery: 0 / 8 explored

Complete all eight explorers, then use the independent Practice and Exam Arena banks.