Skip to lesson
1

Topic 12 · Motion in a circle

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

Cambridge International A Level Physics 9702

The whole topic in one idea: constant speed is not constant velocity. A continuously changing direction requires an inward acceleration and therefore an inward resultant force.

Exact syllabus boundary
12.1 Kinematics of uniform circular motion and 12.2 Centripetal acceleration. Satellite orbits are taught in Topic 13. Projection as simple harmonic motion and Kepler's laws are not Topic 12 requirements.

12.1 · Radians

Definition of one radianA circle sector has radius r and arc length s. When s equals r, the angle at the centre is one radian.radius rradius rarc sθθ = s/r; if s = r, θ = 1 rad
Definition
One radian is the angle subtended at the centre of a circle by an arc equal in length to the radius. In general, $\theta=s/r$, with $\theta$ in radians.

Complete turn

For a full circle, $s=2\pi r$, so $\theta=2\pi r/r=2\pi\,\mathrm{rad}$.

Convert

$180^\circ=\pi\,\mathrm{rad}$, so multiply degrees by $\pi/180$ and radians by $180/\pi$.
Worked example
$73.0^\circ=73.0(\pi/180)=1.27\,\mathrm{rad}$ to three significant figures.
Exam trap
A radian is dimensionless because it is a length divided by a length, but write “rad” when reporting an angular displacement or angular speed so the physical meaning is clear.
Quick Check 1
Convert $0.850\,\mathrm{rad}$ to degrees.
$0.850(180/\pi)=48.7^\circ$.
2

Angular speed & vector directions

Angular speed

  • Uniform circular motion has constant speed but changing velocity.
  • AccelerationNeeded because velocity direction changes continuously.
  • The inward resultant force comes from real interactions such as tension, gravity or friction.
Angular speed is the rate of change of angular displacement: $\omega=\Delta\theta/\Delta t$. Its unit is $\mathrm{rad\,s^{-1}}$.
$\omega=\dfrac{2\pi}{T}=2\pi f$    and    $v=r\omega=\dfrac{2\pi r}{T}$

Every point on a rigid rotating object has the same $\omega$ and period $T$, but a point farther from the axis has a larger linear speed because $v\propto r$.

Velocity and acceleration in uniform circular motionAt three points on a circular path, velocity arrows are tangent and acceleration arrows point toward the centre.centrev tangenta inwardsame speed ⇒ equal-length blue arrowschanging direction ⇒ changing velocity

Why acceleration exists at constant speed

Velocity is a vector. Over a short time, the two equal-magnitude velocity vectors point in slightly different directions. Their vector change $\Delta\vec v$ points toward the centre. In the small-angle limit:

$\dfrac{\Delta v}{v}=\dfrac{\Delta s}{r},\quad \Delta s=v\Delta t \quad\Rightarrow\quad a=\dfrac{\Delta v}{\Delta t}=\dfrac{v^2}{r}$
Direction pair
$\vec v$ is tangent to the path. $\vec a$ and the resultant force point radially inward. Therefore $\vec v\perp\vec a$ at every instant in uniform circular motion.
Common mistake
An object released from a string does not move radially outward. Once the inward force disappears, it continues along the tangent at the release point.
Quick Check 2
A wheel turns at $90\,\mathrm{rev\,min^{-1}}$. Find $\omega$.
$f=90/60=1.50\,\mathrm{Hz}$, so $\omega=2\pi f=9.42\,\mathrm{rad\,s^{-1}}$.
3

Centripetal acceleration & force

$a=r\omega^2=\dfrac{v^2}{r}$     $F=ma=mr\omega^2=\dfrac{mv^2}{r}$

Choose by given data

If the question gives $r$ and $\omega$, use $r\omega^2$. If it gives $r$ and $v$, use $v^2/r$. Avoid an unnecessary conversion.

Resultant, not a new force

“Centripetal force” names the inward resultant. It may be supplied by tension, friction, gravity, contact force, or components of several forces.

Ratio intelligence

  • Use the radius of the circular path, not automatically the length of a string or a diameter.
  • Angular speed is measured in radians per second.
  • Centripetal describes the resultant’s direction; do not add it as another force on a free-body diagram.
ChangeAt fixed...Effect on $a$ and $F$
$v\to2v$$r$four times
$r\to2r$$v$half
$r\to2r$$\omega$twice
$T\to2T$$r$one quarter, because $\omega\propto1/T$
Worked example · multi-step
A $0.180\,\mathrm{kg}$ sensor is $0.650\,\mathrm m$ from a rotor axis and rotates at $240\,\mathrm{rev\,min^{-1}}$. $f=4.00\,\mathrm{Hz}$, $\omega=25.1\,\mathrm{rad\,s^{-1}}$, so $F=mr\omega^2=0.180(0.650)(8\pi)^2=73.9\,\mathrm N$.
Exam trap
At fixed $\omega$, increasing $r$ increases $a$. At fixed $v$, increasing $r$ decreases $a$. State what is held constant before using a proportionality.

Graph signatures

Your turn · Find centripetal acceleration for speed 6.0 m/s and radius 3.0 m.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

4

Real forces in circular motion

Draw only real forces. Choose the inward direction. Then write sum of inward components = $mv^2/r$.

Real forces that provide a centripetal resultantThree panels show friction on a turntable, horizontal tension in a conical pendulum and weight plus normal contact at the top of a loop.flat rotating platefrictionstatic friction supplies the inward resultantconical pendulumTmgT sinθtop of a loopmgNboth real forces point toward the centre
  1. Mark the centre and draw a radial axis.
  2. Draw weight, tension, normal contact and friction as physically appropriate.
  3. Resolve only the components along the radial direction.
  4. Write one signed radial equation. “Inward” can change from point to point.
Flat turntable
Static friction can provide the inward resultant. At impending slip, set the required inward force equal to the maximum available friction stated in the question: $mv^2/r=F_{f,\max}$ or $mr\omega^2=F_{f,\max}$. Do not introduce a coefficient of friction unless a question explicitly supplies one.
Banked surface, no friction
$N\cos\theta=mg$ vertically and $N\sin\theta=mv^2/r$ inward. Dividing gives $\tan\theta=v^2/(rg)$.
Conical pendulum
$T\cos\theta=mg$ and $T\sin\theta=mv^2/r=mr\omega^2$. The horizontal component, not all of $T$, is centripetal.
Vertical circle
At the top, inward is downward, so if both $mg$ and $T$ point inward: $mg+T=mv^2/r$. At the bottom, inward is upward: $T-mg=mv^2/r$.
Common mistake
Do not add a separate arrow labelled “centripetal force” to a free-body diagram. After drawing the real forces, their radial resultant equals $mv^2/r$.
Quick Check 3
At the top of a loop, a cart remains in contact with the track and the normal force is zero. What is its minimum speed?
$mg=mv^2/r$, so $v=\sqrt{gr}$.
Explain · Is centripetal force an extra interaction to add to tension or gravity?

5

Paper 4 solving technique

The five-line circular-motion method

  1. Convert every angle to radians and every rotation rate to s$^{-1}$.
  2. Write the geometry: radius is measured from the axis/centre, not a diameter or path length.
  3. Choose $\omega=2\pi/T$, $v=r\omega$, or $a=v^2/r=r\omega^2$ from the given data.
  4. Draw real forces and define the inward direction.
  5. Keep extra digits, then give a sensible unit and significant figures.
Worked example · friction limit
A block on a horizontal plate is at $r=0.400\,\mathrm m$. Its limiting friction is $0.300$ of its weight. At the threshold, $m r\omega^2=0.300mg$. Thus $\omega=\sqrt{0.300g/0.400}=2.71\,\mathrm{rad\,s^{-1}}$, or $25.9\,\mathrm{rev\,min^{-1}}$.
Worked example · vertical circle
A $0.250\,\mathrm{kg}$ mass moves at $5.00\,\mathrm{m\,s^{-1}}$ at the bottom of a circle of radius $0.800\,\mathrm m$. $T-mg=mv^2/r$, so $T=0.250(25/0.800)+0.250(9.81)=10.3\,\mathrm N$.
Unfamiliar context
Replace the story with three questions: Where is the centre? Which real force components point toward it? Which speed variable is supplied? A laboratory rotor, fairground ride and rotating habitat use the same physics.
Units that cause errors
$\mathrm{rev\,min^{-1}}$ must be divided by 60 to obtain revolutions per second, then multiplied by $2\pi$. Centimetres must be divided by 100 before using SI equations.
Quick Check 4
A particle at fixed radius changes from $3.0$ to $4.0\,\mathrm{m\,s^{-1}}$. By what factor does its centripetal force change?
$(4/3)^2=16/9=1.78$.
6

Master equation sheet

Definitions

$\theta=s/r$; one radian is subtended by an arc equal to the radius. $\omega=\Delta\theta/\Delta t$. Uniform circular motion has constant speed and continuously changing velocity.

Equations

Angular$\omega=2\pi/T=2\pi f$
Linear speed$v=r\omega=2\pi r/T$
Acceleration$a=r\omega^2=v^2/r$
Resultant force$F=mr\omega^2=mv^2/r$
Common mistakes
  • using degrees in $s=r\theta$
  • forgetting the square on $v$ or $\omega$
  • using diameter/altitude instead of radius
  • drawing an outward force in an inertial-frame free-body diagram
  • setting one force equal to $mv^2/r$ when several radial components act
Examiner checklist
  • definition includes arc and radius
  • vectors labelled tangent/inward
  • real force source named
  • radial sign convention stated
  • working shows conversion from rpm
  • answer has SI unit and sensible s.f.