Skip to lesson
1

Topic 16 · Thermodynamics

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

PHYSICS CREST · Global Physics Academy

The whole topic in one idea: a system stores microscopic energy, and its change is the algebraic result of energy transferred by heating and by work.

Exact syllabus boundary
16.1 internal energy; 16.2 constant-pressure work and the first law. Topic 14 phase-change ideas and Topic 15 ideal-gas ideas may appear only as prerequisite applications. Heat engines, cycles, entropy, molar heat capacities and general variable-pressure work are not Topic 16 requirements.
Internal energy is determined by the state of a system and is the sum of the random distribution of kinetic and potential energies associated with its molecules.
Microscopic components of internal energyRandom molecular motion contributes kinetic energy. Intermolecular separation and arrangement contribute potential energy. Bulk motion of the whole object is excluded.random molecular kinetic energyintermolecular potential energy

Included

Random translation, rotation/vibration where relevant, and intermolecular potential energy.

Not included

Bulk kinetic energy of the whole object and gravitational potential energy of the whole object in an external field.
State function
The change in internal energy depends only on the initial and final states. Heating and work are transfer routes, not quantities stored in the system.
2

Temperature, state & phase change

Rising temperature

A temperature rise means the average random kinetic energy of molecules increases, so internal energy increases. Do not describe an increase in the bulk speed of the object.

Phase change at constant temperature

During melting or vaporisation, the temperature—and hence average random kinetic energy—can remain constant while intermolecular potential energy increases. Internal energy therefore increases even without a temperature rise.

ChangeRandom molecular KEIntermolecular PEInternal energy
same phase, temperature risesincreasesmay change littleincreases
ideal melting at constant temperatureconstant on averageincreasesincreases
ideal-gas temperature unchangedconstant on averagenegligible in modelunchanged
Common mistake
“Temperature is constant, so internal energy cannot change” is false during a phase change. Track both microscopic kinetic and potential energy.
Quick Check 1
Why can boiling water gain internal energy while remaining at the boiling temperature?
The transferred energy increases intermolecular potential energy as molecules separate; their average random kinetic energy and temperature stay constant.
3

Constant-pressure gas work

Constant-pressure expansion and compressionA gas below a loaded piston expands when the piston rises and compresses when it falls. Work by the gas and work on the gas have opposite signs.expansion: ΔV > 0compression: ΔV < 0

Fix the volume convention first

  • Cambridge’s convention can be written ΔU = Q + W_on.
  • If you use work done by the gas instead, write ΔU = Q − W_by.
  • Expansion against pressure gives positive work by the gas; compression gives positive work on it.
$ΔV=V_f-V_i$
work done by gas: $W_{by}=pΔV$
work done on gas: $W_{on}=-pΔV=p(V_i-V_f)$

The work magnitude at constant pressure is $p|ΔV|$. Expansion has $ΔV>0$, so $W_{by}>0$ and $W_{on}<0$. Compression has $ΔV<0$, so $W_{by}<0$ and $W_{on}>0$.

Constant-pressure work on a pressure–volume graphA horizontal path from initial to final volume has rectangular area p times change in volume. This is the magnitude of the work.area = p |ΔV|VᵢV𝒇Vp
Worked example
A gas expands at $2.00×10^5$ Pa from $1.20×10^{-3}$ m³ to $3.70×10^{-3}$ m³. $ΔV=2.50×10^{-3}$ m³. Work by gas is +500 J; work on gas is −500 J.
Exam trap
Never write only “$W=pΔV$” when a sign is required. State whether your $W$ means work by or work on the gas. The first law below uses work done on the system.
4

First law of thermodynamics

  • The first law is energy conservation applied to a thermal system.
  • Changes in internal energy depend on heating and work.
  • The signs must reflect whether work is done on the gas or by the gas.
First-law sign ledgerHeating into the system is positive q. Work done on the system is positive W. Their algebraic sum is the change in internal energy.SYSTEMchange ΔUq > 0: heating inW > 0: work onΔU = q + W
$ΔU=q+W$

In this syllabus equation, $q$ is energy transferred to the system by heating and $W$ is work done on the system.

TermPositiveNegative
$q$heating into systemenergy leaves by cooling
$W$work done on system; compressionwork done by system; expansion
$ΔU$internal energy increasesinternal energy decreases
Worked sign ledger
A gas receives 820 J by heating and does 260 J of work on the surroundings. Then $q=+820$ J and $W=-260$ J, so $ΔU=+560$ J.
Common mistake
“The gas does 300 J of work” means $W=-300$ J in $ΔU=q+W$. Translate the words before substituting.
Your turn · A gas receives 700 J by heating and does 250 J of work. Find ΔU.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

5

Recognising defined processes

Do not infer more than the question states

Stated situationReliable consequence
rigid container$ΔV=0$, so pressure–volume work is zero
thermally insulated (often described as adiabatic)$q=0$
ideal gas at constant temperaturemean molecular KE and internal energy are unchanged, so $ΔU=0$
constant-pressure expansion$W_{on}=-pΔV$
constant-pressure compression$W_{on}=+p|ΔV|$
phase change at constant temperatureinternal energy may change through intermolecular PE
Unfamiliar-context routine
Draw a system boundary. Label every energy arrow: heating in/out and work on/by. Convert each arrow to a sign only after its direction is clear.
Boundary filtering
Heat-engine efficiency, entropy, cyclic engines and area under a general curved p–V path are later/out-of-syllabus material. Use $pΔV$ only for the stated constant-pressure change.
Explain · A gas is compressed without thermal energy transfer. What happens to its internal energy?

6

Paper 4 technique & master sheet

Sign-first algorithm

  1. Write $ΔV=V_f-V_i$ in m³.
  2. At constant pressure, calculate work magnitude $p|ΔV|$.
  3. Translate: expansion → $W_{on}$ negative; compression → $W_{on}$ positive.
  4. Translate heating: into system $q$ positive; out of system $q$ negative.
  5. Use $ΔU=q+W_{on}$ and interpret the final sign.

Master equations

Volume change$ΔV=V_f-V_i$
Work by gas$W_{by}=pΔV$ at constant pressure
Work on gas$W_{on}=-pΔV$ at constant pressure
First law$ΔU=q+W_{on}$
Rigid container$ΔV=0⇒W=0$
Thermally insulated$q=0$
Common mistakes
  • using cm³ or dm³ without conversion
  • confusing work by with work on
  • treating heating as energy stored
  • assuming constant temperature means constant internal energy during phase change
  • adding magnitudes without signs
Final answer check
Include a sign and a sentence: “internal energy increases/decreases by … J.” This exposes sign errors before submission.