Skip to lesson
1

Topic 18 · Electric Fields

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

  • Electric field strength is force per positive test charge.
  • Electric potential is energy per charge relative to a reference.
  • Field is directional; potential is scalar.
  • Their zero points do not necessarily occur at the same positions.
Cambridge International A Level Physics 9702

The whole topic in one idea: a source charge creates a field; the field assigns force per unit positive charge and potential energy per unit positive charge to every point.

Exact syllabus boundary
18.1 fields/field lines; 18.2 uniform fields and charged-particle motion; 18.3 Coulomb force; 18.4 point-charge field; 18.5 potential, gradient and potential energy. Capacitance is Topic 19.
Electric field strength at a point is the force per unit positive charge placed at that point: $E=F/q$.
$F=qE$
Charge in fieldForce direction
positive qsame as E
negative qopposite to E
Common mistake
The field direction is defined using a positive test charge. An electron does not move “along the field”; its electric force is opposite to the field.
2

Field lines & superposition

Electric field lines between unlike chargesEvery field line begins on the positive charge and ends on the negative charge. Arrowheads therefore point from positive to negative.+-

Superposition

Electric field is a vector: calculate each contribution with its direction, then add vectors. Potential is a scalar and is added algebraically.

One-dimensional sign method
Choose right as positive. A positive source produces field away from itself; a negative source produces field towards itself. Give each contribution a sign before adding.
Exam trap
A field line is not the path that every charge follows. Initial velocity and the sign of the moving charge also matter.
3

Uniform electric fields

Uniform electric field between parallel platesA positive upper plate and negative lower plate create equally spaced downward field lines. Potential decreases in the field direction.higher V, +lower V, -E = ΔV / d; field points from high to low potential
$E=\Delta V/\Delta d$

Use the magnitude of the potential difference and perpendicular plate separation. Away from edge effects, E is constant.

Charged-particle route

  • First determine the field direction from the source charges, then use F = qE with the sign of the moving charge.
  • For energy, use ΔU = qΔV.
  • A negative charge responds oppositely to a positive charge in the same field.
  1. Find E from plate data.
  2. Find force with $F=qE$, including direction.
  3. Find acceleration using $a=F/m$.
  4. Use kinematics separately in perpendicular directions.
Worked force
Across 12.0 mm the p.d. is 3.60 kV, so $E=3.00×10^5$ V m⁻¹. The force magnitude on an electron is $eE=4.80×10^{-14}$ N, opposite to E.
Trajectory
A particle entering horizontally with no horizontal force has constant horizontal speed and constant vertical acceleration, so its path is parabolic while it remains between the plates.
Explain · An electron is placed in an electric field pointing right. Its electric force points…

Your turn · Find the force magnitude on a +2.0 μC charge in a 300 N/C field.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

4

Coulomb force between point charges

$F=\dfrac{|Q_1Q_2|}{4πε_0r^2}=k\dfrac{|Q_1Q_2|}{r^2}$

Here r is the centre-to-centre separation. The formula above gives magnitude; like signs repel and unlike signs attract.

Vector routine

  1. Draw the force on the charge of interest due to each source.
  2. Calculate each magnitude using its own separation.
  3. Resolve along chosen axes.
  4. Add components; then state magnitude and direction.
Inverse-square scaling
If separation becomes 3r with charges unchanged, force becomes $F/9$. If one charge also doubles, the new force is $2F/9$.
Common mistake
Do not use edge-to-edge separation for spheres. For a point outside a spherical conductor, treat the sphere's charge as concentrated at its centre.
5

Field of a point charge

$E=\dfrac{|Q|}{4πε_0r^2}$

The field points radially away from positive Q and towards negative Q. For an external point, a charged spherical conductor acts as a point charge at its centre.

Field and potential of a positive point chargeElectric field decreases as inverse square of distance. Potential is positive and decreases as inverse distance. The negative potential gradient gives field strength.EVrr∝ 1/r²∝ 1/r
QuantityPoint-charge dependenceNature
E$1/r^2$vector
V$1/r$scalar
Cancellation warning
At a point, vector fields may cancel while scalar potentials add. Always calculate E and V separately.
6

Electric potential

Electric potential at a point is the work done per unit positive charge in bringing a small test charge from infinity to that point.
$V=\dfrac{Q}{4πε_0r}$

Potential carries the sign of the source charge. With several point charges, $V_{total}=\sum kQ_i/r_i$.

$E_P=qV=\dfrac{Qq}{4πε_0r}$
QqEPInteraction
positivepositivelike charges; external work is needed to bring them closer slowly
negativenegativeunlike charges; field releases energy as they approach
Sign trap
Use signed Q and q in V and EP. Use magnitudes plus a separate direction rule for Coulomb force.
7

Potential gradient & energy transfer

$E=-\dfrac{dV}{dx}$

The minus sign says the field points in the direction of decreasing potential. On a V–x graph, field magnitude is the magnitude of the gradient.

Work–energy route

$\Delta E_P=q\Delta V$,   $W_{field}=-\Delta E_P$

If only the electric field does work, $\Delta E_K=-\Delta E_P$.

Electron across a potential rise
For an electron moving through $\Delta V=+250$ V, $\Delta E_P=q\Delta V=-4.00×10^{-17}$ J, so its kinetic energy increases by $4.00×10^{-17}$ J.
Common mistake
“Higher potential means higher potential energy” is true only for positive charge. For negative charge, $E_P=qV$ reverses the comparison.
Quick Check
A V–x graph has gradient −600 V m⁻¹. What is E in the +x direction?
$E=-dV/dx=+600$ V m⁻¹, so the field points in +x.
8

Paper 4 technique & master sheet

Three-ledger method

  1. Field ledger: source charge, distance, vector direction.
  2. Force ledger: multiply by the moving/test charge and reverse direction for negative q.
  3. Energy ledger: use signed q with potential differences.

Master equations

field definition$E=F/q$, $F=qE$
uniform field$E=\Delta V/\Delta d$
Coulomb force$F=|Q_1Q_2|/(4πε_0r^2)$
point-charge field$E=|Q|/(4πε_0r^2)$
potential$V=Q/(4πε_0r)$
potential gradient$E=-dV/dx$
potential energy$E_P=qV=Qq/(4πε_0r)$
Final traps
  • centre distance, not surface gap
  • E vector; V scalar
  • electron force opposite E
  • field points down the potential gradient
  • signed charges in energy
Unit check
$1\,\mathrm{N\,C^{-1}}=1\,\mathrm{V\,m^{-1}}$. A potential gradient must therefore have field units.