Topic 4 · Forces, Density & Pressure
Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.
Core target: centre of gravity, moments and couples, equilibrium and force triangles, density, pressure, the derivation/use of $\Delta p=\rho g\Delta h$, and upthrust $F=\rho gV$.
4.1 · Centre of Gravity
- A force’s turning effect depends on its line of action as well as its magnitude.
- Pressure describes perpendicular force per area.
- Density relates the mass and volume of a material; these are different physical quantities.
The centre of gravity is the point at which the whole weight of an object may be considered to act.
In a uniform gravitational field, draw the weight force vertically downward through the CoG.
Why does a suspended object settle with its CoG below the pivot?
If the line of action of weight does not pass through the pivot, weight produces a moment and the object rotates. At rest, the CoG lies vertically below the pivot so the weight has zero moment about the pivot.
Finding an irregular CoG: suspend from two different points and draw a vertical plumb line each time. Their intersection gives the CoG.
4.1 · Moment of a Force
The moment of a force about a point is:
$$\boxed{M=F\,d_\perp}$$where $d_\perp$ is the perpendicular distance from the point (pivot) to the line of action of the force. Unit: $\mathrm{N\,m}$.
Two safe methods
Method A: find $d_\perp$ directly.
Method B: if $\theta$ is the angle between the lever arm $\vec r$ and the force, use
$$M=Fr\sin\theta.$$The moment is greatest for a given $F$ and $r$ when the force is perpendicular to the lever ($\theta=90^\circ$).
The distance in $M=Fd_\perp$ is not automatically the length of the beam. It is the shortest perpendicular distance from the pivot to the force's line of action.
4.1 · Couples & Resultant Turning Effect
A couple consists of two equal, opposite and parallel forces whose lines of action are separated. The resultant force is zero, but the pair produces rotation.
$$\boxed{\text{torque of a couple}=F\,s}$$$s$ is the perpendicular separation between the two lines of action.
Angled couple
Never double one force's moment by guesswork. Find the perpendicular separation $s$ between the two force lines, then use $Fs$.
If equal opposite forces act at the ends of a beam of length $L$ and each force makes angle $\theta$ with the beam, then $s=L\sin\theta$.
Single force
Can give a resultant force and a moment.
$M=Fd_\perp$ about a specified point.
Couple
Resultant force $=0$ but resultant torque $\ne0$.
Torque $=F\times$ force separation.
Resultant force and resultant torque are separate questions
| Resultant force | Resultant torque | What can happen? |
|---|---|---|
| 0 | 0 | Equilibrium: rest or constant velocity, no angular acceleration |
| not 0 | 0 | Linear acceleration without angular acceleration about the chosen CoG model |
| 0 | not 0 | Pure turning tendency — a couple is the classic example |
| not 0 | not 0 | Both translational and rotational effects may occur |
For a required moment $M$ at fixed distance $r$, $F=M/(r\sin\theta)$. The minimum force occurs when $\sin\theta=1$, so apply the force at $90^\circ$ to the lever.
4.2 · Equilibrium of Forces
- For equilibrium, require both zero resultant force and zero resultant moment.
- Choose a pivot that removes an unknown force’s moment.
- In a stationary liquid, pressure differences depend on vertical depth differences, not container shape.
No resultant force means no linear acceleration. No resultant torque means no angular acceleration.
An object in equilibrium does not have to be stationary: it may move with constant velocity.
For a body in rotational equilibrium, the sum of clockwise moments about any point equals the sum of anticlockwise moments about that point.
$$\sum M_{\rm clockwise}=\sum M_{\rm anticlockwise}$$Beam / ladder / hinge method
- Draw every external force and its line of action. Put the object's own weight at its CoG.
- Choose a pivot through an awkward unknown reaction so that its moment is zero.
- Use clockwise moments = anticlockwise moments.
- Then use $\sum F_x=0$ and $\sum F_y=0$ for the remaining forces.
- Check the direction and physical reasonableness of every reaction/tension.
Three-force concurrency
If a rigid body is in equilibrium under exactly three non-parallel coplanar forces, their lines of action must meet at one point. Otherwise one force would leave an unbalanced moment.
This is a powerful way to infer the direction of an unknown hinge reaction.
Force triangle — not just a phrase
- Choose a scale and direction for one force.
- From its arrowhead draw the second force.
- Draw the third force head-to-tail.
- If the object is in equilibrium, the final arrowhead returns to the start: $\vec F_1+\vec F_2+\vec F_3=0$.
$\sum F=0$ alone is not enough for a rigid body. Equal opposite forces on different lines can give zero resultant force but still form a couple and rotate the body.
4.3 · Density & Pressure
SI unit: $\mathrm{kg\,m^{-3}}$.
Always convert mass and volume consistently before substitution.
Pressure is normal force per unit area.
SI unit: $\mathrm{Pa}=\mathrm{N\,m^{-2}}$.
Do not average densities unless the situation actually makes that valid. Use:
$$\rho_{\rm mix}=\frac{m_{\rm total}}{V_{\rm total}}.$$If no volume change occurs, find each volume from $V=m/\rho$, add the volumes, then divide total mass by total volume.
Derive the hydrostatic pressure equation
- Take a fluid column of cross-sectional area $A$ and vertical height difference $\Delta h$.
- $V=A\Delta h$, so $m=\rho A\Delta h$.
- Its weight is $mg=\rho A\Delta h\,g$.
- The pressure difference supports this weight: $\Delta p=\Delta F/A$.
The syllabus relation is $\Delta p=\rho g\Delta h$. If a liquid surface is open to the atmosphere, the gauge pressure at depth $h$ is $\rho gh$, while the absolute/total pressure is $p_{\rm atm}+\rho gh$.
Pressure–depth graph toolkit
If the graph shows pressure due to the liquid only, it passes through the origin. If it shows absolute pressure in an open tank, the intercept is approximately atmospheric pressure.
4.3 · U-Tubes, Manometers & Layered Fluids
In a connected liquid at rest, points at the same horizontal level in the same liquid have the same pressure.
Choose a convenient common level and work down from each free surface, adding $\rho g h$ for every layer crossed.
Open U-tube technique
If both free surfaces are at atmospheric pressure, $p_{\rm atm}$ cancels when you equate pressure at the same level.
For a simple two-liquid arrangement this often becomes $\rho_1 h_1=\rho_2 h_2$, but derive it from pressure balance rather than memorising it blindly.
If one level rises by $h$ while the other side falls by $h$, the final vertical difference between the two surfaces is $2h$. The pressure difference is then $\Delta p=\rho g(2h)$, not $\rho gh$.
Layer-by-layer pressure
For a borehole or tank containing several liquid layers, calculate the pressure contribution from each layer separately and add them. Add atmospheric pressure only if the question asks for absolute/total pressure and the top surface is exposed to the atmosphere.
4.3 · Upthrust & Archimedes' Principle
Fluid pressure acts normal to a surface and increases with depth. Therefore the pressure forces on the lower parts of an immersed object are greater than those on the upper parts. Their resultant is an upward force called upthrust.
At the same depth, opposite horizontal pressure forces balance. Vertically, the deeper pressure is larger, giving a net upward resultant.
From pressure difference to $F=\rho gV$
For a vertical-sided block with horizontal top/bottom area $A$ and vertical height $h$:
$$F_{\rm up}=(p_b-p_t)A$$ $$p_b-p_t=\rho gh$$ $$F_{\rm up}=\rho ghA$$Since $Ah=V_{\rm displaced}$:
$$\boxed{F_{\rm up}=\rho gV_{\rm displaced}}$$This is Archimedes' principle: the upthrust equals the weight of the displaced fluid.
| Situation | Force comparison | Motion tendency |
|---|---|---|
| Floating at rest | $F_{\rm up}=W$ | Equilibrium |
| Fully submerged, no other forces, $\rho_{\rm object}=\rho_{\rm fluid}$ | $F_{\rm up}=W$ | Neutral buoyancy |
| $F_{\rm up}>W$ | Resultant upward | Accelerates upward |
| $F_{\rm up}<W$ | Resultant downward | Accelerates downward |
For a floating object with no other vertical forces:
$$\rho_{\rm fluid}V_{\rm disp}g=\rho_{\rm object}V_{\rm object}g$$ $$\boxed{\frac{V_{\rm disp}}{V_{\rm object}}=\frac{\rho_{\rm object}}{\rho_{\rm fluid}}}$$Topic 4 · Exam Toolbox
| Idea | Equation / test | Use it when... |
|---|---|---|
| Moment | $M=Fd_\perp=Fr\sin\theta$ | A force tends to turn about a point |
| Couple | $\tau=Fs$ | Equal opposite parallel forces; $s$ is perpendicular separation |
| Equilibrium | $\sum\vec F=0$, $\sum M=0$ | No linear or angular acceleration |
| Density | $\rho=m/V$ | Relate mass and volume |
| Pressure | $p=F/A$ | Normal force per unit area |
| Hydrostatic | $\Delta p=\rho g\Delta h$ | Pressure difference between depths |
| Pressure graph | gradient $=\rho g$ | Find density from $p$–$h$ data |
| Layered fluids | $\Delta p=g\sum\rho_i h_i$ | Several fluid layers |
| Upthrust | $F_{\rm up}=\rho gV_{\rm disp}$ | Weight of displaced fluid |
- Moment: draw the line of action, then locate the perpendicular distance.
- Equilibrium: choose a pivot that removes an unknown reaction, then resolve forces.
- Three forces: use concurrency + a closed force triangle when appropriate.
- Density mixture: total mass divided by total volume.
- Hydrostatic: decide whether the question wants pressure difference, gauge pressure or absolute pressure.
- U-tube: equate pressures at the same horizontal level and check whether a level change becomes $2h$.
- Upthrust: pressure difference first; displaced-fluid weight second.
- Using beam length instead of perpendicular moment arm.
- Multiplying couple torque by 2.
- Forgetting the object's own weight acts at its CoG.
- Thinking equilibrium means “stationary” rather than “zero linear and angular acceleration”.
- Drawing a force triangle that does not close head-to-tail.
- Averaging densities instead of using total mass / total volume.
- Using $p=\rho gh$ as absolute pressure when atmospheric pressure matters.
- Using $h$ instead of $2h$ after equal level changes in a U-tube.
- Saying upthrust occurs because an object is less dense, instead of because pressure changes with depth.
| # | Current syllabus requirement | Where mastered |
|---|---|---|
| 1 | Weight acts at centre of gravity | Page 1 |
| 2 | Define/apply moment of a force | Page 1 |
| 3 | Understand a couple | Page 2 |
| 4 | Define/apply torque of a couple | Page 2 |
| 5 | Principle of moments | Page 3 |
| 6 | No resultant force and no resultant torque in equilibrium | Page 3 |
| 7 | Vector triangle for coplanar forces in equilibrium | Page 3 |
| 8 | Define/use density | Page 4 |
| 9 | Define/use pressure | Page 4 |
| 10 | Derive $\Delta p=\rho g\Delta h$ | Page 4 |
| 11 | Use $\Delta p=\rho g\Delta h$ | Pages 4–5 |
| 12 | Upthrust due to hydrostatic pressure difference | Page 6 |
| 13 | Calculate upthrust $F=\rho gV$ | Page 6 |
Forces can translate and turn. Equilibrium requires both effects to balance. In fluids, pressure changes with depth, and that pressure difference is exactly what produces upthrust.