Kinematics is not an equation-list unit. You must be able to describe the same motion with words, arrows, motion diagrams, graphs and equations — then move between those representations without changing the physics. Unit 1 carries a 10–15% multiple-choice weighting, but its reasoning reappears throughout the course.
1.1 · Scalars and Vectors in One Dimension
Kinematics connects words, diagrams, graphs and equations describing motion.
Start by choosing the object, coordinate direction and time interval.
Position, displacement, distance, velocity and speed answer different questions.
In one dimension, choose a positive direction and use the sign to encode direction. A vector arrow should point in the correct direction and its length should be proportional to the vector's magnitude.
Vector sum = signed addition
If right is positive, then $+5+(-3)=+2$. The result points right.
Magnitude is always nonnegative: the magnitude of a displacement $-7\,\mathrm{m}$ is $7\,\mathrm{m}$.
AP trap: the magnitude of a vector sum is not automatically the sum of magnitudes. Direction matters.
AP Trap — position sign is not motion direction
A cart at $x=+4\,\mathrm m$ can move left or right. Position tells where it is; the sign of velocity tells its instantaneous direction of motion.
1.2 · Displacement, Velocity and Acceleration
Object model + position
In kinematics, an extended object can often be treated as a single point when its size, shape and internal details do not matter to the motion being studied. Its position $x$ is measured from a chosen origin.
$$\Delta x=x_f-x_i$$
Distance = total path length (scalar). Displacement = final position minus initial position (vector).
Average velocity
$$\bar v=\frac{\Delta x}{\Delta t}$$
This is valid for any motion over an interval. It depends only on start and end positions, not on the path between them.
Average speed
$$\text{average speed}=\frac{\text{total distance}}{\Delta t}$$
Average speed and $|\bar v|$ are equal only when there is no reversal that makes distance exceed $|\Delta x|$.
Average acceleration
$$\bar a=\frac{\Delta v}{\Delta t}$$
Use signed velocities. A change from $+3$ to $-5\,\mathrm{m/s}$ is $\Delta v=-8\,\mathrm{m/s}$.
Instantaneous quantities
Instantaneous velocity is the slope of the tangent to an $x$–$t$ graph. Instantaneous acceleration is the slope of the tangent to a $v$–$t$ graph.
Velocity $v$
Acceleration $a$
What happens to speed?
+
+
speeding up
+
−
slowing down
−
+
slowing down
−
−
speeding up
AP Technique — separate "direction" from "speeding up"
First ask: what is the sign of velocity? That gives direction. Then compare the signs of $v$ and $a$. Same sign → speed increases. Opposite signs → speed decreases. Never use the phrase “negative acceleration means slowing down.”
Quick Check 1 — signs and averages
A runner moves from $x=+2$ m to $x=-10$ m in 4 s. (a) Find average velocity. (b) If the runner actually traveled 20 m, find average speed. (c) An instant later $v=-6$ m/s and $a=+2$ m/s². Is the runner speeding up or slowing down?
(a) $\bar v=(-10-2)/4=-3\,\mathrm{m/s}$. (b) Average speed $=20/4=5\,\mathrm{m/s}$. (c) $v$ and $a$ have opposite signs, so the runner is slowing down.
2
Constant-Acceleration Toolkit
1.3 · Representing Motion with Equations
The condition comes first
The three standard kinematic equations below describe one-dimensional motion only when acceleration is constant. Before choosing an equation, ask whether that model is justified.
No displacement needed$$v=v_0+at$$
No final velocity needed$$x=x_0+v_0t+\frac12at^2$$
No time needed$$v^2=v_0^2+2a(x-x_0)$$
Useful derived relation for constant $a$$$\Delta x=\left(\frac{v_0+v}{2}\right)t$$
The AP solving routine: Model → Knowns → Unknown → Path → Check
Choose an axis and state which direction is positive.
Model the motion: constant acceleration? one dimension? ideal projectile component?
List signed known quantities and the unknown.
Select or derive a relationship containing the unknown and known quantities.
Work symbolically first when the question asks for a derivation.
Substitute last; include units and inspect the sign/magnitude for physical sense.
Worked example: no time
A cart speeds up uniformly from $8.0$ to $28\,\mathrm{m/s}$ while moving $90\,\mathrm m$.
Choose + along the motion. $v_0=8.0$, $v=28$, $\Delta x=90$, and $t$ is absent.
Check: positive $a$ is consistent with positive motion that is speeding up.
Symbolic reasoning — do not rush to numbers
If a car brakes with constant acceleration magnitude $b$, then with $v=0$:
$$0=v_0^2-2bd \quad\Rightarrow\quad d=\frac{v_0^2}{2b}$$
So $d\propto v_0^2$. Double the initial speed → four times the stopping distance. Increase speed by a factor $1.5$ → distance changes by $1.5^2=2.25$.
Three common equation traps
“Stops” means $v=0$ at that instant; “starts from rest” means $v_0=0$.
Do not make acceleration positive just because you use its magnitude. The sign comes from your coordinate choice.
Do not use constant-$a$ equations across an interval where acceleration changes. Split the motion or use a graph/model appropriate to the situation.
Quick Check 2 — choose, derive, predict
A car moving at $24\,\mathrm{m/s}$ brakes uniformly to rest with acceleration magnitude $6.0\,\mathrm{m/s^2}$. (a) Find stopping time. (b) Find stopping distance. (c) If the same car began at $36\,\mathrm{m/s}$ with the same braking acceleration, predict the new stopping distance without repeating the full calculation.
Take forward as +, so $a=-6.0$. (a) $0=24-6t\Rightarrow t=4.0$ s. (b) $0=24^2+2(-6)d\Rightarrow d=48$ m. (c) Speed factor $=36/24=1.5$, so distance factor $=1.5^2=2.25$. New distance $=108$ m.
3
Representation Intelligence
1.3 · Motion Diagrams, Graphs, Equations and Words
A position–time gradient gives velocity.
A velocity–time gradient gives acceleration, while signed area gives displacement.
A graph below the time axis can represent motion in the negative direction rather than an impossible speed.
Motion diagrams
A motion diagram marks an object's position at equal time intervals. The spacing tells you speed; the direction from one dot to the next tells you velocity direction.
Equal spacing → constant velocity → $a=0$.
Increasing spacing while moving right → $v>0$ and $a>0$.
Decreasing spacing while moving right → $v>0$ and $a<0$.
A reversal appears when the direction of successive displacements changes.
AP habit: translate before calculating
When given a motion diagram, say in words what $v$ and $a$ are doing before choosing an equation.
When given a graph, identify the quantity on each axis before interpreting slope or area.
Graph Intelligence · Slope, Area and Shape
Graph
Slope gives
Signed area gives
Shape clue
$x$ vs $t$
velocity $v$
not a standard kinematics quantity
concavity gives sign of $a$
$v$ vs $t$
acceleration $a$
displacement $\Delta x$
crossing axis = reversal
$a$ vs $t$
rate of change of $a$ (not needed here)
change in velocity $\Delta v$
area can change $v$ even if position is unknown
$x$–$t$: tangent slope = $v$
Steeper tangent → larger $|v|$. Concave up → $a>0$.
$v$–$t$: slope = $a$, area = $\Delta x$
Straight line → constant acceleration.
$a$–$t$: area = $\Delta v$
Positive area adds to velocity; negative area subtracts.
Horizontal line ≠ same meaning on every graph
Horizontal on $x$–$t$ → object at rest. Horizontal on $v$–$t$ → constant velocity, which may be nonzero. Horizontal on $a$–$t$ → constant acceleration, which may be nonzero.
Quick Check 3 — graph language
An $x$–$t$ graph is rising but concave down. State the signs of velocity and acceleration. Then explain what is happening to the speed.
Rising graph → positive slope → $v>0$. Concave down → slope becomes less positive → $a<0$. Opposite signs mean the object is slowing down.
4
Translate the Motion
One event → $x$–$t$, $v$–$t$, $a$–$t$
Translation Between Representations routine
When moving from one representation to another, do not redraw the same shape. Translate the physics relationship: $x$-slope gives $v$; $v$-slope gives $a$; $v$-area gives $\Delta x$; $a$-area gives $\Delta v$.
Read it like a physicist
At first $v>0$, so $x$ increases. Because $a<0$, the positive velocity shrinks.
At the dashed instant, $v=0$ but $a$ is still negative. The object is momentarily at rest and reverses.
Afterward $v<0$ and $a<0$: same signs, so it speeds up in the negative direction.
Signed area: displacement vs distance
Worked graph problem
Suppose velocity changes linearly from $+6\,\mathrm{m/s}$ at $t=0$ to $-2\,\mathrm{m/s}$ at $t=4\,\mathrm s$.
$$a=\frac{-2-6}{4}=-2\,\mathrm{m/s^2}$$
Velocity reaches zero after 3 s. The signed area is
$$\Delta x=\left(\frac{6+(-2)}{2}\right)(4)=8\,\mathrm m.$$
But total distance is the sum of area magnitudes:
$$d=\frac12(3)(6)+\frac12(1)(2)=9+1=10\,\mathrm m.$$
Average vs instantaneous — know what the question asks
Average acceleration over a whole interval uses endpoints: $\Delta v/\Delta t$. Instantaneous acceleration comes from the local slope of a $v$–$t$ graph. A steep middle segment does not automatically equal the average over the entire interval.
Sharp corners and vertical lines
A perfectly vertical segment on an $x$–$t$ graph would imply infinite velocity and is not a physically valid motion graph. At a sharp corner, the tangent slope is not uniquely defined at the mathematical instant; real motion changes over a finite time.
Quick Check 4 — area and reversal
A $v$–$t$ graph is +4 m/s from 0–3 s, then −2 m/s from 3–7 s. Find (a) displacement, (b) total distance, and (c) average velocity over 7 s.
(a) $\Delta x=(4)(3)+(-2)(4)=4$ m. (b) $d=12+8=20$ m. (c) $\bar v=4/7=0.571\,\mathrm{m/s}$ in the positive direction.
5
Free Fall without Sign Panic
1.3 · Vertical Motion Near Earth's Surface
Gravity is acceleration, not "a downward velocity"
Near Earth's surface, ideal free-fall acceleration is approximately constant and points downward:
$$|\vec a_g|=g\approx 9.8\,\mathrm{m/s^2}\quad\text{(often approximated as }10\,\mathrm{m/s^2}\text{)}.$$
If up is positive, $a_y=-g$. If down is positive, $a_y=+g$. The physics is unchanged.
Physical event
Up chosen +
Down chosen +
Ball launched upward at 12 m/s
$v_0=+12,\ a=-g$
$v_0=-12,\ a=+g$
At highest point
$v=0,\ a=-g$
$v=0,\ a=+g$
Ball moving downward
$v<0,\ a<0$
$v>0,\ a>0$
AP Trap — at the top, velocity is zero; acceleration is not
At the top of an upward throw, the object has $v_y=0$ for an instant, but gravity still acts, so $a_y=-g$ if up is positive. Zero velocity does not imply zero acceleration.
Same height symmetry — only when heights match
Ignoring air resistance, when a projectile returns to its launch height, its speed has the same magnitude as at launch, but vertical velocity has opposite sign.
Time up = time down only for equal vertical displacements about the top. If landing height differs from launch height, do not simply double the ascent time.
Worked example — thrown upward
A ball is launched upward at $19.6\,\mathrm{m/s}$. Take up as positive.
$$0=19.6-9.8t_{\rm top}\Rightarrow t_{\rm top}=2.00\,\mathrm s$$
$$0=(19.6)^2+2(-9.8)\Delta y\Rightarrow \Delta y=19.6\,\mathrm m$$
If it returns to the launch height, total time $=4.00$ s and final velocity $=-19.6\,\mathrm{m/s}$.
Lab thinking — measure $g$ from motion
Drop an object from rest from several measured heights $h$. Measure fall time $t$ using video or electronic timing. From
$$h=\frac12gt^2,$$
plot $h$ on the vertical axis against $t^2$ on the horizontal axis. A best-fit line should have slope $g/2$, so $g=2(\text{slope})$. Use multiple heights and repeated trials; a best-fit line is stronger evidence than one measurement.
Quick Check 5 — coordinate choice
A package leaves an elevator while moving upward at 12 m/s. Take up as positive. (a) What are $v_0$ and $a$ immediately after release? (b) How long until the package reaches its highest point?
(a) It keeps its upward velocity at release: $v_0=+12\,\mathrm{m/s}$. Gravity gives $a=-9.8\,\mathrm{m/s^2}$. (b) $0=12-9.8t\Rightarrow t=1.22$ s. The package does not instantly start moving downward.
6
Reference Frames
1.4 · Reference Frames and Relative Motion
Motion is measured relative to an observer
A reference frame defines the coordinate system used by an observer. Position and velocity can have different values in different frames even though all observers describe the same physical event.
AP boundary — relative-velocity arithmetic is one-dimensional here
For AP Physics 1, adding or subtracting velocities to convert between reference frames is restricted to one-dimensional motion. Do not turn Unit 1 relative-motion calculations into 2D wind/river vector problems.
The subtraction rule
$$v_{A/B}=v_{A/G}-v_{B/G}$$
Read $v_{A/B}$ as “velocity of A relative to B.” $G$ can be the ground or any chosen inertial reference frame.
If the passenger walks toward the rear at $2\,\mathrm{m/s}$ relative train, then $v_{P/T}=-2$ and $v_{P/G}=18\,\mathrm{m/s}$.
Acceleration is the same in all inertial frames with parallel axes
If two inertial frames move at constant velocity relative to each other, changing frame subtracts a constant velocity from every measured velocity. Therefore the change in velocity per time is unchanged: both observers using parallel, equally oriented axes measure the same acceleration components.
Catch-up / passing
Two cars moving in the same direction: relative speed is the difference in signed velocities.
Opposite directions
If $v_A=+30$ and $v_B=-10\,\mathrm{m/s}$, then $v_{B/A}=-10-30=-40\,\mathrm{m/s}$.
Frame language
Always state “relative to what?” A velocity without a frame can be incomplete information.
Graph shift idea
Switching to a frame moving at constant $u$ shifts a velocity graph vertically by $-u$; its slope, and therefore acceleration, is unchanged.
Quick Check 6 — relative motion
Car A moves at +30 m/s and Car B at +10 m/s. (a) Find $v_{B/A}$. (b) If both cars begin accelerating at +2 m/s² at the same instant, what is the acceleration of B relative to A?
(a) $v_{B/A}=10-30=-20\,\mathrm{m/s}$: B moves backward at 20 m/s in A's frame. (b) Their accelerations are equal, so the derivative of their relative velocity gives relative acceleration $2-2=0\,\mathrm{m/s^2}$.
7
2D Vectors & Projectiles
1.5 · Vectors and Motion in Two Dimensions
Resolve first, recombine later
If a vector of magnitude $A$ makes angle $\theta$ above the +x direction:
$$A_x=A\cos\theta,\qquad A_y=A\sin\theta.$$
For perpendicular components:
$$A=\sqrt{A_x^2+A_y^2},\qquad \theta=\tan^{-1}\!\left(\frac{A_y}{A_x}\right)$$
Use the signs/quadrant of the components to interpret the direction correctly.
Component choice is a model choice
Components depend on the coordinate axes you choose; the actual vector does not.
Do not use $\sin$ and $\cos$ mechanically. Sketch the triangle and ask which component is adjacent/opposite to the stated angle.
Projectile motion = two linked clocks, two independent motions
Horizontal x-direction
Vertical y-direction
$a_x=0$
$a_y=-g$ if up is +
$v_x=v_{0x}$ constant
$v_y=v_{0y}-gt$
$\Delta x=v_{0x}t$
$\Delta y=v_{0y}t-\frac12gt^2$
The same time $t$ belongs to both components. More generally, constant-acceleration vector motion satisfies $\vec v=\vec v_0+\vec a t$ and $\Delta\vec r=\vec v_0t+\tfrac12\vec a t^2$. The one-dimensional squared-velocity equation must be applied component by component. Solve whichever dimension gives time most easily, then use that time in the other.
Horizontal velocity $v_x(t)$
No horizontal acceleration in the ideal projectile model.
Vertical velocity $v_y(t)$
Slope $=-g$ if up is chosen positive.
Highest point
$v_y=0$, but $v_x$ is generally nonzero, so the projectile is still moving. Acceleration remains downward.
Same-height launch and landing
With ideal motion, the vertical speed magnitude at a given height is the same on the way up and down, with opposite sign.
Derivation routine — horizontal launch
An object leaves a table horizontally with speed $u$ from height $h$ and lands horizontal distance $R$ away.
Vertical motion gives $h=\frac12gt^2\Rightarrow t=\sqrt{2h/g}$. Horizontal motion gives $R=ut$.
Therefore
$$u=R\sqrt{\frac{g}{2h}}.$$
This relation also gives a prediction: for fixed $R$, increasing $h$ means the required launch speed decreases as $1/\sqrt h$.
Projectile traps
Horizontal velocity does not make a projectile stay in the air longer when its initial vertical motion and drop height are unchanged.
At the top, total velocity is not zero unless the launch was purely vertical.
Do not mix x- and y-equations: horizontal displacement belongs with horizontal velocity; vertical displacement belongs with vertical velocity and $g$.
Do not memorize special range formulas when a component derivation is safer and works in more situations.
Quick Check 7 — projectile transfer
Two balls leave the same cliff at the same instant. Ball A is dropped; Ball B is launched horizontally. Air resistance is negligible. (a) Which hits first? (b) If B's horizontal speed doubles, what happens to its time of fall and horizontal range?
(a) They hit together because their vertical initial velocities, vertical accelerations and vertical displacements are identical. (b) Fall time is unchanged; range doubles because $R=v_xt$.
8
AP Lab & Transfer Thinking
Design an experiment from the model
Example investigation — test horizontal projectile motion
A launcher fires a ball horizontally from fixed height $h$. Use a photogate to measure launch speed $v_x$ and paper/carbon paper to locate the landing point and measure range $R$.
Keep $h$ fixed. Use several launch settings to produce different measured $v_x$ values.
For each setting, repeat several launches and use the mean range $R$.
Plot $R$ vertically against $v_x$ horizontally.
The model predicts $R=v_x\sqrt{2h/g}$, so the graph should be linear through the origin with slope $m=\sqrt{2h/g}$.
An experimental value of gravity is then $g=2h/m^2$.
Measure what matters
Height $h$, launch speed $v_x$, horizontal range $R$. Define the launch point and floor origin carefully.
Reduce random uncertainty
Repeat trials, average the landing position, use a best-fit line rather than one pair of measurements.
Control variables
Keep launch height and apparatus geometry fixed while varying launch speed.
Evaluate the model
A nonzero intercept, curvature or systematic residual pattern may signal alignment error, air effects or a nonhorizontal launch.
What AP free-response reasoning looks like in Unit 1
Mathematical Routines: begin from a known relationship, derive symbolically, then substitute if numerical data are provided. Do not jump to a memorized special formula.
Translation Between Representations: connect a physical situation to graphs/equations and justify why the features agree — e.g., constant horizontal projectile velocity but linearly changing vertical velocity.
Experimental Design and Analysis: state measurable quantities, a repeatable procedure, graph axes, expected relationship, and how a graph feature gives the target quantity.
Qualitative / Quantitative Translation: make a claim, derive or analyze mathematically, then explain whether the mathematics supports the claim and how a changed parameter affects the result.
"Justify" means physics, not only algebra
A strong justification identifies the physical relationship and connects it to the claim. For example: “Increasing launch height increases vertical fall time. To hit the same horizontal target, the required horizontal speed must decrease because $R=v_xt$ and $R$ is fixed.”
Quick Check 8 — experimental graph
At fixed launch height, a student plots range $R$ against measured horizontal launch speed $v_x$ and obtains slope $0.64$ s. If $h=2.0$ m, estimate $g$ from $g=2h/m^2$.
$g=2(2.0)/(0.64)^2=4.0/0.4096=9.77\,\mathrm{m/s^2}$, close to the expected value near Earth's surface.
$x$–$t$ slope → $v$. $v$–$t$ slope → $a$. $v$–$t$ signed area → $\Delta x$. $a$–$t$ signed area → $\Delta v$. Concavity of $x$–$t$ tells the sign of $a$.
Reference frames
$v_{A/B}=v_{A/G}-v_{B/G}$ in the one-dimensional AP Physics 1 boundary. Acceleration is the same in inertial frames moving at constant velocity relative to one another.
2D motion
$A_x=A\cos\theta$, $A_y=A\sin\theta$. Projectile: $a_x=0$, $a_y=-g$ (up positive), same time in both dimensions.
High-value checks before final answer
Did I choose and keep one sign convention?
Am I using average or instantaneous quantity?
Is acceleration constant before I use kinematic equations?
Did I use signed area for displacement but magnitude-area for distance?
For a projectile, did I keep x and y components separate?
Does my final sign match the physical direction I described?