Skip to lesson
PCPHYSICS CREST
1

Unit 6 · Energy and Momentum of Rotating Systems

The Unit 6 idea
Unit 6 applies the conservation tools from Units 3–4 to rotating systems. The recurring AP move is to decide what is conserved, for which system, and over which interval: energy, angular momentum, or neither. Current Unit 6 is a 5–8% MCQ-weighted unit, but its reasoning appears naturally inside multi-unit FRQs.

6.1 · Rotational Kinetic Energy

  • Rotational energy and angular momentum describe different features.
  • Rotational kinetic energy is ½Iω²; angular momentum for fixed-axis rigid rotation is Iω.
  • Conservation of angular momentum depends on external torque.
Energy of spin
For rotation about a fixed inertial axis, use inertia about that axis. In combined translation and rotation, use CM inertia for the spin term. A rigid system has rotational kinetic energy $$K_{rot}=\tfrac12 I\omega^2.$$ It is a scalar. The mass distribution matters through rotational inertia $I$.
Translation$K_{trans}=\tfrac12 mv^2$
Rotation$K_{rot}=\tfrac12 I\omega^2$
Moving + spinning$K_{tot}=\tfrac12Mv_{cm}^2+\tfrac12I_{cm}\omega^2$
farther from axisnearer the axissame point mass and ω; larger radius means larger inertia

At the same $\omega$, the system with larger $I$ has larger $K_{rot}$.

At the same $K_{rot}$, larger $I$ means smaller $\omega$.

Functional dependence
$K_{rot}\propto I$ if $\omega$ is fixed, but $K_{rot}\propto\omega^2$ if $I$ is fixed. Doubling angular speed makes rotational kinetic energy four times as large.
Quick Check 1
A flywheel has $I=0.80\,\mathrm{kg\,m^2}$ and $\omega=5.0\,\mathrm{rad/s}$. Find $K_{rot}$.
$K_{rot}=\tfrac12(0.80)(5.0)^2=10\,\mathrm{J}$.
Your turn · Find rotational kinetic energy for I = 0.50 kg m² and ω = 4.0 rad/s.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

2

Rotational Energy Is Still Particle Kinetic Energy

Why $\tfrac12I\omega^2$ works

For a rigid body, each small mass $m_i$ at radius $r_i$ moves with $v_i=r_i\omega$. Adding the translational kinetic energies of all pieces gives

$$\sum \tfrac12m_iv_i^2=\tfrac12\omega^2\sum m_ir_i^2=\tfrac12I\omega^2.$$ So rotational kinetic energy is not a new kind of energy; it is a compact way to add the kinetic energy of all rotating pieces.
Center of mass at rest ≠ zero kinetic energy
A spinning disk can have $v_{cm}=0$ and still have nonzero kinetic energy because points away from the axis are moving.
Pure spin about fixed axis$K=\tfrac12I\omega^2$
Translation of CM$K=\tfrac12Mv_{cm}^2$
Rolling / combined motion$K=\tfrac12Mv_{cm}^2+\tfrac12I_{cm}\omega^2$
Rvcm →CW ωcontactrightward motion; clockwise rotation; stationary surface

For a rolling rigid body, energy is shared between motion of the center of mass and spin about the center of mass.

Do not count the same motion twice: use the center-of-mass decomposition consistently.

Compare before calculating
For equal total kinetic energy, a body with more energy tied up in rotation must have less translational kinetic energy and therefore a smaller $v_{cm}$ for the same mass.
Quick Check 2
Two flywheels have the same rotational kinetic energy. Flywheel B has four times the rotational inertia of A. Compare their angular speeds.
From $K=\tfrac12I\omega^2$, $\omega\propto1/\sqrt I$. Thus $\omega_B=\omega_A/2$.
3

6.2 · Torque Transfers Energy

Rotational work
A torque can transfer energy when it acts through an angular displacement. For constant torque, $$W=\tau\,\Delta\theta.$$ Use radians for $\Delta\theta$.
Graph intelligence
On a $\tau$–$\theta$ graph, signed area is work. Positive area adds rotational kinetic energy; negative area removes it when rotational kinetic energy is the relevant changing energy.
0123048τ / (N·m)θ / rad

Variable torque: break the graph into rectangles/triangles or reason from total signed area.

Equal areas under two different curves mean equal work, even if peak torques differ.

Rotational work–energy route

If a fixed-axis rigid system experiences net work from torques,

$$W_{net}=\Delta K_{rot}.$$

This is the same energy principle as Unit 3, now written for rotation.

Work depends on angle, not time
A constant torque does the same work during each complete revolution because each revolution is $2\pi$ rad. A larger angular speed changes how quickly the work is done, not the work per revolution.
Quick Check 3
A constant net torque of $6.0\,\mathrm{N\,m}$ acts while a wheel turns $4.0$ rad. Find the net work.
$W=\tau\Delta\theta=(6.0)(4.0)=24\,\mathrm{J}$.
4

6.3 · Angular Momentum

Rigid system about an axis$L=I\omega$
Point-object magnitude$|L|=mvr\sin\phi=mv r_\perp$
Units$\mathrm{kg\,m^2/s}$

Axis/reference-point choice matters

  • Use a fixed reference point or inertial axis for these impulse and conservation arguments, and state one consistent positive rotational sense when adding signed momenta.
  • The same moving object can have different angular momentum about different reference points because $r_\perp$ changes.
  • If its straight-line path passes through the chosen point, $r_\perp=0$ and its angular momentum about that point is zero.
Omvr⊥straight path; reference point O; position shown schematically

The most useful form is often $L=mv r_\perp$.

For circular motion about the center, velocity is perpendicular to radius, so $L=mvr$.

Current AP boundary
AP Physics 1 expects one-dimensional sign conventions and magnitude manipulation. The 3-D vector direction of angular momentum and angular impulse is beyond the course scope. Do not waste study time memorizing a right-hand-rule direction for Unit 6 questions.
Quick Check 4
A $0.20$ kg puck moves at $12\,\mathrm{m/s}$ along a line whose perpendicular distance from point O is $0.30$ m. Find the angular-momentum magnitude about O.
$L=mv r_\perp=(0.20)(12)(0.30)=0.72\,\mathrm{kg\,m^2/s}$.
5

Angular Impulse Changes Angular Momentum

Rotational impulse–momentum theorem
For constant net torque, $$\Delta L=\tau_{net}\Delta t.$$ For a varying net torque, angular impulse is the signed area under the $\tau$–$t$ graph.
$\tau$–$t$ grapharea $=\Delta L$
$L$–$t$ graphslope $=\tau_{net}$
constant $I$$\Delta L=I\Delta\omega$
τnet / (N·m)02420-1t / sL / (kg·m²/s)024024t / s

Larger positive torque gives a steeper positive slope on $L(t)$.

If positive and negative torque areas cancel, the final angular momentum equals the initial angular momentum.

Keep the graph axes straight
Area under $\tau$–$\theta$ gives work. Area under $\tau$–$t$ gives change in angular momentum. The same vertical axis with a different horizontal axis means different physics.
Quick Check 5
A net torque of $3.5\,\mathrm{N\,m}$ acts for $2.0$ s. What angular impulse is delivered?
$\Delta L=\tau\Delta t=(3.5)(2.0)=7.0\,\mathrm{kg\,m^2/s}$.
6

6.4 · Conservation of Angular Momentum

  • For changing mass distribution with negligible external torque, compare angular momentum before and after.
Choose the system first
Angular momentum of a selected system stays constant when the net external torque about the chosen axis is zero. Internal torques may redistribute angular momentum among parts of the system without changing the system total.
Conservation condition$\tau_{ext,net}=0$
Then$L_i=L_f$
Common rigid-body form$I_i\omega_i=I_f\omega_f$
initialfinalinitial radius R; final radius R/2; compare endpoint states

If no external torque acts, moving mass inward decreases $I$ and increases $\omega$ so that $L$ stays constant.

This does not automatically mean rotational kinetic energy stays constant.

Energy can change while angular momentum stays constant

For a rigidly rotating system, $K=\dfrac{L^2}{2I}$. At fixed $L$, decreasing $I$ increases $K$. A person pulling masses inward does internal work, converting chemical energy into kinetic energy.

Conservation trigger
Do not write $I_i\omega_i=I_f\omega_f$ just because something is rotating. First justify why the external angular impulse is negligible over the interval.
Quick Check 6
An ideal rotating platform of negligible inertia carries a point mass at radius $R$. The point mass moves to $R/2$ with negligible external angular impulse, and corotates with the platform with no radial motion at both endpoints. By what factor does $\omega$ change?
$I=mr^2$ becomes one-fourth as large, so $\omega$ becomes 4 times as large to keep $L$ constant.
With negligible external torque, rotational inertia halves. Angular speed becomes…

7

Brief Collisions · Angular Momentum Technique

Why angular momentum is powerful during a collision

During a short off-center collision, the contact forces between the colliding objects may be huge but are internal to the chosen combined system. If the external angular impulse about the pivot is negligible, angular momentum about that pivot is conserved across the impact.

initially stationary rotorRm, vtop view; fixed vertical axle; before impact; schematic

The diagram shows a turntable target; the same axle-based method applies to a bar. Before impact: $L_i=mvr$ when velocity is perpendicular to the radius.

After sticking: $L_f=(I_{target}+mr^2)\omega_f$.

Step 1choose axis at pivot
Step 2write $L_i$ for every part
Step 3write $L_f$ and conserve
Distribution comparison
If two bars receive the same incoming angular momentum but one has more mass concentrated far from the axis, it has larger final $I$ and therefore smaller final $\omega$.
Inelastic rotational collision
When objects stick, angular momentum can be conserved while kinetic energy decreases. Do not conserve rotational kinetic energy through a sticking collision.
Quick Check 7
A dart gives the same initial angular momentum to two initially resting bars. Bar B has the larger final rotational inertia. Which bar spins faster after the dart sticks?
Bar A. Since the same $L$ is shared after impact and $\omega=L/I$, the smaller-$I$ system has the larger angular speed.
8

6.5 · Rolling Without Slipping

  • For rolling without slipping, translational speed and angular speed satisfy v = ωR.
  • Include both translational and rotational kinetic energy.
No-slip constraint
For ideal rolling without slipping on a stationary surface, choose positive linear displacement along the motion and positive angular displacement in the matching rolling sense (rightward translation pairs with clockwise rotation here). Then $$v_{cm}=\omega R,\qquad a_{cm}=\alpha R,\qquad \Delta x_{cm}=R\Delta\theta.$$ The point of contact is instantaneously at rest relative to the stationary surface.
Rvcm →CW ωcontactstationary surface; rightward motion paired with clockwise rotation

Total kinetic energy is $K=\tfrac12Mv_{cm}^2+\tfrac12I_{cm}\omega^2$.

In ideal no-slip rolling on a fixed surface, static friction does not dissipate mechanical energy because the contact point has no relative motion.

Rolling down a ramp

From rest through vertical drop $h$, with no dissipative losses:

$$Mgh=\tfrac12Mv^2+\tfrac12I\left(\frac{v}{R}\right)^2.$$

If $I=cMR^2$, then $v=\sqrt{\dfrac{2gh}{1+c}}$.

Friction is not automatically energy loss
A rolling object can experience static friction and still conserve mechanical energy. Energy dissipation occurs when there is slipping and kinetic friction acts at a point moving relative to the surface.
Quick Check 8
A solid disk has $I=\tfrac12MR^2$ and rolls from rest down a vertical drop $h$. Write $v^2$ at the bottom.
$Mgh=\tfrac12Mv^2+\tfrac14Mv^2=\tfrac34Mv^2$, so $v^2=\tfrac43gh$.
9

Rolling Races, Friction, and Slipping

Sliding blockfrictionless; all kinetic energy translationalSolid diskno slip; Icm = MR²/2Hoopno slip; Icm = MR²same CM drop; rest release; no dissipative losses

From the same height with no dissipative loss: sliding block reaches the greatest translational speed, then disk, then hoop.

Reason: a larger fraction of the available energy is tied up in rotation when $I/(MR^2)$ is larger.

What changes when slipping occurs?

During slipping, $v_{cm}=\omega R$ is not enforced. Kinetic friction acts at a moving contact point, dissipating mechanical energy while also changing translational and rotational motion.

Current AP boundary
Precise quantitative relationships between $v_{cm}$ and $\omega$ while slipping are beyond AP Physics 1. You are expected to explain the qualitative changes and recognize energy dissipation. “Rolling friction” as a separate model is also outside the course boundary.
No slip$v_{cm}=\omega R$
Slipno fixed equality
Kinetic frictiondissipates mechanical energy
Quick Check 9
A hoop and a solid disk have the same $M,R$ and roll from the same height without slipping. Which has greater $v_{cm}$ at the bottom?
The solid disk. Its smaller $I/(MR^2)$ leaves a larger fraction of the gravitational energy as translational kinetic energy.
10

6.6 · Motion of Orbiting Satellites

Two-body system model
When the satellite mass is negligible compared with the central mass $M$, the central object's motion can be treated as negligible. Gravity is the interaction that constrains the orbit.
Gravitational PE$U=-\dfrac{{GMm}}{r}$
Angular momentum$L=mvr\sin\phi$
Total mechanical energy$E=K+U$
Mv tangenta inwardcircular orbit; gravity is the only interaction

Velocity is tangent to the path. Acceleration points toward the central mass because gravity is the only force.

In a circular orbit, $r$, $K$, $U$, $E$, and $|L|$ are constant. In an elliptical orbit, $E$ and $|L|$ stay constant while $K$ and $U$ trade.

Circular-orbit energy relationships

Using $GMm/r^2=mv^2/r$:

$$K=\frac{GMm}{2r},\qquad U=-\frac{GMm}{r},\qquad E=-\frac{GMm}{2r}.$$

These are derived relationships, not a reason to ignore the underlying force and energy principles.

Quick Check 10
For a circular orbit, how does the magnitude of gravitational potential energy compare with kinetic energy?
$|U|=2K$ and $U=-2K$. Therefore the total energy is $E=K+U=-K$.
11

Elliptical Orbits and Escape

Periapsis and apoapsis

At the closest and farthest points of an elliptical orbit, velocity is perpendicular to the radius. Conservation of angular momentum gives

$$mr_pv_p=mr_av_a\quad\Rightarrow\quad r_pv_p=r_av_a.$$

So the satellite moves faster when it is closer to the central body.

M at focusPAvPvAaPaAvelocity-arrow ratio shown; acceleration arrows schematic

Closer: $U$ is more negative, so $K$ is larger because total $E$ is constant.

Farther: $U$ is less negative, so $K$ is smaller.

Escape velocity
Escape speed is the threshold speed for which the satellite–central-body system has total mechanical energy $E=0$: $$\tfrac12mv_{esc}^2-\frac{{GMm}}r=0\quad\Rightarrow\quad v_{esc}=\sqrt{\frac{{2GM}}r}.$$
What “escape” really means
For an outward launch at exactly escape speed, the object does not suddenly leave the gravitational field. It keeps slowing as it moves outward and approaches zero speed only at infinite distance. If launched faster than escape speed, it still has nonzero kinetic energy far away.
Quick Check 11
A planet has the same mass as another planet but twice the radius. Compare the escape speed from its surface.
$v_{esc}\propto1/\sqrt r$, so doubling radius makes escape speed $1/\sqrt2$ as large.
12

Unit 6 · AP Transfer Sheet

Four routines you must be able to execute
MR: begin from a principle and derive. TBR: move between diagrams, graphs, equations, and verbal models. LAB: decide what to measure, linearize, use slope/intercept, and reduce uncertainty. QQT: make a qualitative claim first, then test it with a mathematical relationship.
IdeaRelationshipHigh-value interpretation
Rotational KE$K_{rot}=\tfrac12I\omega^2$$\omega$ matters quadratically
Torque work$W=\tau\Delta\theta$area under $\tau$–$\theta$
Angular momentum$L=I\omega$ or $mvr\sin\phi$depends on chosen axis/reference point
Angular impulse$\Delta L=\tau\Delta t$area under $\tau$–$t$; slope of $L$–$t$ is $\tau$
Conservation$L_i=L_f$requires negligible net external angular impulse
Rolling$v=\omega R$only when no slip
Orbit energy$E=K-GMm/r$elliptical orbit: $E$ constant while $K,U$ change
Escape$v_{esc}=\sqrt{2GM/r}$threshold corresponds to $E=0$

Experimental linearization toolbox

Rolling inertia: from $Mgh=\tfrac12Mv^2+\tfrac12I(v^2/R^2)$, a graph of $h$ against $v^2$ can reveal $I$ from its slope.

Torque and angular momentum: use force sensor × lever arm to obtain torque; use video/angle-time data to obtain $\omega$; then test angular impulse–momentum by comparing $I\Delta\omega$ with the signed area under the net-torque–time graph.

Uncertainty: use many trials over a wide variable range, repeat measurements, and use a best-fit line rather than forcing through an assumed point.

Boundary traps
Do not use 3-D angular-momentum directions. Do not quantitatively model rolling while slipping. Do not invent rolling-friction formulas. For extended rigid bodies, use any rotational-inertia expressions provided by the problem or reference material.
Continue the ecosystem
·
Quick Check 12
A system has zero net external torque but its rotational inertia increases. Compare the initial and final rigidly corotating states, with no radial motion. What happens to $L$, angular-speed magnitude $|\omega|$, and $K_{rot}$?
$L$ stays constant. $|\omega|=|L|/I$ decreases if the initial angular momentum is nonzero (it stays zero if $L=0$). At fixed nonzero $L$, $K_{rot}=L^2/(2I)$ decreases as $I$ increases; if $L=0$, it stays zero.