Unit 6 Practice · Energy and Momentum of Rotating Systems
Training layer
Use this after the Notes. The bank deliberately trains the recurring Unit 6 demands: rotational energy, torque-work graphs, angular impulse, system selection, conservation of angular momentum, rolling, orbit energy, escape reasoning, experimental linearization, and the four current AP free-response routines.
30 original MCQs8 original FRQs6.1–6.6MR · TBR · LAB · QQT
Multiple Choice Questions
Q1. Easy6.1 · rotational KE
A flywheel has $I=0.80\,\mathrm{kg\,m^2}$ and $\omega=5.0\,\mathrm{rad/s}$. What is its rotational kinetic energy?
A. $10\,\mathrm{J}$
B. $20\,\mathrm{J}$
C. $4.0\,\mathrm{J}$
D. $2.0\,\mathrm{J}$
$K=\tfrac12I\omega^2=\tfrac12(0.80)(25)=10$ J.
Q2. Easy6.1 · scaling
For a rigid body with fixed $I$, its angular speed doubles. Its rotational kinetic energy becomes
A. twice as large
B. four times as large
C. half as large
D. unchanged
$K_{rot}\propto\omega^2$ for fixed $I$.
Q3. Medium6.1 · comparison
Two flywheels have equal rotational kinetic energy. Flywheel B has four times the rotational inertia of A. Which is correct?
A. $\omega_B=4\omega_A$
B. $\omega_B=2\omega_A$
C. $\omega_B=\omega_A/2$
D. $\omega_B=\omega_A/4$
At fixed $K$, $\omega\propto1/\sqrt I$.
Q4. Easy6.1 · total KE
A rolling rigid body has $12$ J of translational kinetic energy and $7$ J of rotational kinetic energy. Its total kinetic energy is
A. $5$ J
B. $84$ J
C. $12$ J
D. $19$ J
The translational and rotational contributions add: $K_{tot}=12+7=19$ J.
Q5. Easy6.2 · torque work
A constant net torque of $6.0\,\mathrm{N\,m}$ acts through $4.0$ rad. How much net work is done?
A. $24$ J
B. $1.5$ J
C. $10$ J
D. $48$ J
$W=\tau\Delta\theta=(6)(4)=24$ J.
Q6. Medium6.2 · graph area
On a $\tau$–$\theta$ graph, torque rises linearly from $0$ to $8\,\mathrm{N\,m}$ over $3$ rad. The work done is
A. $24$ J
B. $12$ J
C. $8$ J
D. $4$ J
Area of the triangle is $\tfrac12(3)(8)=12$ J.
Q7. Medium6.2 · net work
A motor does $+40$ J of work on a wheel while a brake does $-15$ J. If these are the only torque works, the wheel’s rotational kinetic energy changes by
A. $-55$ J
B. $-25$ J
C. $+25$ J
D. $+55$ J
$W_{net}=40-15=25$ J $=\Delta K_{rot}$.
Q8. Easy6.2 · radians
A constant positive torque $\tau$ acts through one complete revolution in its own rotational sense. The work done is
A. $\tau$
B. $\tau/2\pi$
C. $\pi\tau$
D. $2\pi\tau$
$W=\tau\Delta\theta=\tau(2\pi)$.
Q9. Easy6.3 · rigid L
A rigid disk has $I=2.5\,\mathrm{kg\,m^2}$ and $\omega=4.0\,\mathrm{rad/s}$. Its angular momentum magnitude is
A. $10\,\mathrm{kg\,m^2/s}$
B. $6.5\,\mathrm{kg\,m^2/s}$
C. $0.625\,\mathrm{kg\,m^2/s}$
D. $40\,\mathrm{kg\,m^2/s}$
$L=I\omega=(2.5)(4)=10$.
Q10. Medium6.3 · point L
A $0.20$ kg puck moves at $12\,\mathrm{m/s}$ along a straight path whose perpendicular distance from point O is $0.30$ m. The angular momentum magnitude about O is
A net torque of $3.5\,\mathrm{N\,m}$ acts for $2.0$ s. What angular impulse is delivered?
A. $1.75\,\mathrm{kg\,m^2/s}$
B. $3.5\,\mathrm{kg\,m^2/s}$
C. $7.0\,\mathrm{kg\,m^2/s}$
D. $14\,\mathrm{kg\,m^2/s}$
$\Delta L=\tau\Delta t=(3.5)(2)=7.0$.
Q12. Easy6.3 · graph slope
The slope of an angular-momentum-versus-time graph represents
A. angular displacement
B. rotational kinetic energy
C. rotational inertia
D. net external torque
$\tau_{net}=dL/dt$.
Q13. Medium6.4 · sticking disks
A disk with rotational inertia $I$ rotates at $\omega$. A second, initially nonrotating disk with inertia $2I$ drops onto it and they stick. With negligible external torque, the final angular speed is
A. $\omega/3$
B. $\omega/2$
C. $2\omega/3$
D. $3\omega$
$I\omega=(I+2I)\omega_f$, so $\omega_f=\omega/3$.
Q14. Medium6.4 · redistribution
A point mass on a nearly massless rotating platform moves from radius $R$ to $R/2$. External torque is negligible. Its angular speed becomes
A. $2\omega$
B. $4\omega$
C. $\omega/2$
D. $\omega/4$
$I\propto r^2$ falls by factor 4; conservation of $L$ makes $\omega$ increase by factor 4.
Q15. Hard6.4 · energy vs L
A rotating system has fixed angular momentum $L$. Its rotational inertia increases. What happens to $K_{rot}$?
A. It increases.
B. It is unchanged.
C. It decreases.
D. It must become zero.
$K=L^2/(2I)$ at fixed $L$, so larger $I$ means smaller $K$.
Q16. Medium6.4 · system selection
Which condition would prevent angular momentum of a chosen system from remaining constant?
A. Large internal torques
B. Changing mass distribution internally
C. Nonzero internal forces
D. A nonzero net external torque about the chosen axis
A nonzero external torque transfers angular momentum between system and environment.
Q17. Hard6.5 · rolling energy
A solid disk with $I=\tfrac12MR^2$ rolls without slipping from rest through a vertical drop of $1.2$ m. Take $g=10\,\mathrm{m/s^2}$. What is $v_{cm}$ at the bottom?
A. $4.0\,\mathrm{m/s}$
B. $4.9\,\mathrm{m/s}$
C. $2.8\,\mathrm{m/s}$
D. $6.9\,\mathrm{m/s}$
$Mgh=\tfrac12Mv^2+\tfrac14Mv^2=\tfrac34Mv^2$, so $v^2=4gh/3=16$.
Q18. Medium6.5 · race
A frictionless sliding block, a solid disk, and a hoop start from rest at the same height. The disk and hoop roll without slipping. Which reaches the bottom with greatest translational speed?
A. The hoop
B. The sliding block
C. The disk
D. All have the same speed
The sliding block puts all gravitational energy into translation; rolling objects split energy between translation and rotation.
Q19. Medium6.5 · static friction
For ideal rolling without slipping on a stationary surface, static friction
A. must be zero in every case
B. always removes mechanical energy
C. does not dissipate mechanical energy
D. always points uphill
The contact point is instantaneously at rest relative to the surface, so ideal static friction does not dissipate energy.
Q20. Medium6.5 · slipping
A wheel is rolling while slipping. Which statement is correct within the AP Physics 1 model?
A. $v_{cm}=\omega R$ must still hold.
B. Mechanical energy must be conserved.
C. The friction force must be static.
D. Kinetic friction can dissipate energy while changing both translation and rotation.
During slip, the no-slip constraint is not enforced and kinetic friction dissipates mechanical energy.
Q21. Medium6.6 · elliptical orbit
A moon of negligible mass compared with its planet moves in an elliptical orbit with gravity as the only interaction. Which quantity is constant throughout the orbit?
A. Its angular momentum magnitude about the planet
B. Its kinetic energy
C. Its speed
D. Its gravitational potential energy
With zero external torque about the central body, orbital angular momentum is constant.
Q22. Medium6.6 · orbital L
At periapsis and apoapsis of an elliptical orbit, $r_pv_p=r_av_a$. If $r_a=3r_p$, then
A. $v_a=3v_p$
B. $v_a=v_p/3$
C. $v_a=v_p$
D. $v_a=v_p/\sqrt3$
Conservation of angular momentum at the turning points gives $v\propto1/r$.
Q23. Hard6.6 · circular energy
For a satellite in a circular orbit, which relation is correct?
A. $U=-K$
B. $E=0$
C. $U=-2K$
D. $E=+K$
Circular-orbit force balance gives $K=GMm/(2r)$ and $U=-GMm/r=-2K$.
Q24. Medium6.6 · escape meaning
A rock is launched radially outward from a planet at exactly escape speed. Ignoring atmosphere, what happens very far away?
A. Its speed approaches the circular-orbit speed.
B. Its gravitational potential energy approaches negative infinity.
C. Its speed increases without bound.
D. Its speed approaches zero as distance approaches infinity.
Escape speed corresponds to total mechanical energy zero; at infinite separation both $K$ and $U$ approach zero.
Q25. Medium6.6 · escape scaling
Two planets have the same mass. Planet B has twice the radius of A. The escape speed from B’s surface is
A. $v_{esc,A}/\sqrt2$
B. $v_{esc,A}/2$
C. $\sqrt2v_{esc,A}$
D. $2v_{esc,A}$
$v_{esc}\propto1/\sqrt r$ for fixed central mass.
Q26. Medium6.3 · graph area
Two different $\tau$–$t$ curves have the same signed area over an interval. What must be the same for the same chosen system?
A. Final angular speed in all cases
B. Change in angular momentum
C. Work done
D. Angular displacement
Signed area under torque versus time is angular impulse $=\Delta L$.
Q27. Hard6.5 · lab linearization
A cylinder rolls without slipping from rest through height $h$. Students measure $v$ at the bottom. From $Mgh=\tfrac12Mv^2+\tfrac12I(v^2/R^2)$, which graph is naturally linear for determining $I$?
A. $v$ versus $h$
B. $h^2$ versus $v$
C. $h$ versus $v^2$
D. $1/h$ versus $v^2$
Rearrangement gives $h=[(1+I/MR^2)/(2g)]v^2$.
Q28. Medium6.3 · reference point
A particle moves in a straight line directly through reference point O. Its angular momentum about O is
A. maximum
B. equal to $mv$
C. independent of the reference point
D. zero
$r_\perp=0$, so $L=mv r_\perp=0$.
Q29. Medium6.5 · observed slip
A wheel has radius 0.20 m, CM speed 1.0 m/s rightward, and clockwise angular speed 3.0 rad/s on a stationary rough floor. Which statement is correct?
A. It is slipping; kinetic friction can dissipate mechanical energy.
B. It rolls without slipping; the contact point is at rest.
C. It is spinning about a stationary CM.
D. Its angular speed must be zero.
No-slip rolling would require $v_{cm}=R|\omega|=(0.20)(3.0)=0.60$ m/s. The measured CM speed differs, so there is slip. Kinetic friction can dissipate energy; no quantitative model of the slip evolution is required.
Q30. Hard6.1/6.3 · synthesis
Two rigid rotors have equal rotational kinetic energy. Rotor B has four times the rotational inertia of A. What is $L_B/L_A$?
A. $1/2$
B. $2$
C. $4$
D. $1$
Using $K=L^2/(2I)$, equal $K$ gives $L\propto\sqrt I$, so the ratio is 2.
Free Response Training
MRFRQ 1 · Rolling cylinder from a ramp10 pts
A rigid cylinder of mass $M$, radius $R$, and rotational inertia $I=cMR^2$ is released from rest from vertical height $h$ and rolls without slipping down a rough ramp. Dissipative losses are negligible.
(a) [2 pts] Draw/describe the forces on the cylinder while it is on the incline and identify the role of static friction.
(b) [4 pts] Starting from conservation of energy, derive the center-of-mass speed at the bottom in terms of $g,h,$ and $c$.
(c) [2 pts] Compare the bottom speed with that of a frictionless sliding block released from the same height.
(d) [2 pts] For equal $M,R,h$, compare a hoop $(c=1)$ with a solid disk $(c=1/2)$ and justify.
Suggested scoring guide
(a) 2 pts: Forces: weight, normal, and static friction. In ideal no-slip rolling the static friction provides the torque needed for rotation but does not dissipate mechanical energy.
(b) 4 pts: $Mgh=\tfrac12Mv^2+\tfrac12(cMR^2)(v^2/R^2)=\tfrac12Mv^2(1+c)$, so $v=\sqrt{2gh/(1+c)}$.
(c) 2 pts: The sliding block is faster because all $Mgh$ becomes translational kinetic energy rather than being shared with rotational kinetic energy.
(d) 2 pts: The solid disk is faster because its smaller $c$ means less energy is tied up in rotation for a given $v$.
MRFRQ 2 · Dart embeds in a turntable10 pts
A pointlike dart of mass $m$ moves at speed $v$ and strikes tangentially at radius $R$ on a stationary turntable of rotational inertia $I_0$. The dart sticks. External angular impulse about the axle is negligible.
(a) [2 pts] State the conservation principle appropriate during the short collision and justify why it applies.
(b) [4 pts] Derive the final angular speed of the dart–turntable system.
(c) [2 pts] Derive an expression for the final rotational kinetic energy.
(d) [2 pts] Is kinetic energy conserved through the sticking collision? Explain without assuming the answer.
Suggested scoring guide
(a) 2 pts: Angular momentum about the axle is conserved because the net external angular impulse about that axle is negligible during the short impact.
(b) 4 pts: $m v R=(I_0+mR^2)\omega_f$, hence $\omega_f=m v R/(I_0+mR^2)$.
(d) 2 pts: No. The objects stick, so some initial kinetic energy is transformed to internal energy even though angular momentum is conserved.
TBRFRQ 3 · Torque graph to angular momentum12 pts
A rotor has initial angular momentum $L_0$. From $0$–$2$ s the net torque is $+4$ N·m; from $2$–$5$ s it is $-2$ N·m.
(a) [4 pts] Sketch/describe the net-torque-versus-time graph and calculate the signed angular impulse in each interval.
(b) [3 pts] Sketch/describe the corresponding angular-momentum-versus-time graph, labeling $L(2)$ and $L(5)$ in terms of $L_0$.
(c) [2 pts] Explain how the slope of your $L$–$t$ graph is related to the torque graph.
(d) [3 pts] If the rotor has constant rotational inertia I, describe how the signed angular-velocity graph is related to the L–t graph. Explain why a speed graph would need absolute values if L crossed zero.
Suggested scoring guide
(a) 4 pts: First rectangle area $=+4(2)=+8$ kg·m²/s. Second area $=(-2)(3)=-6$ kg·m²/s.
(b) 3 pts: Thus $L(2)=L_0+8$ and $L(5)=L_0+2$. The graph is piecewise linear, first with slope +4 and then slope -2.
(c) 2 pts: $dL/dt=\tau_{net}$, so the slope of each $L$ segment equals the net torque.
(d) 3 pts: With constant I, signed $\omega=L/I$, so the angular-velocity graph has the shape of L(t) scaled by 1/I. Angular speed is $|L|/I$; if L changes sign, the speed graph reflects its negative portion above zero.
TBRFRQ 4 · Elliptical-orbit representations12 pts
A moon travels in an elliptical orbit around a much more massive planet. Point P is closest to the planet and point A is farthest. Gravity is the only interaction.
(a) [3 pts] At P and A, describe the directions of the moon’s velocity and acceleration.
(b) [3 pts] Sketch/describe the moon’s kinetic energy as a function of distance from P to A.
(c) [3 pts] Sketch/describe the gravitational potential energy over the same distance and relate it to your kinetic-energy graph.
(d) [3 pts] Explain how the two graphs are consistent with conservation of total mechanical energy and angular momentum.
Suggested scoring guide
(a) 3 pts: Velocity is tangent to the orbit at both points; acceleration points toward the planet.
(b) 3 pts: Kinetic energy is largest at the smaller radius P and decreases toward A.
(c) 3 pts: Gravitational potential energy $U=-GMm/r$ increases (becomes less negative) as radius increases.
(d) 3 pts: $K+U$ remains constant while the two trade. Angular momentum remains constant; at the apsides $rv$ is constant, so smaller $r$ corresponds to larger $v$ and larger $K$.
LABFRQ 5 · Determine rotational inertia from a rolling ramp10 pts
Students have a rigid wheel of known mass M and radius R but unknown CM inertia I. It is released from rest and rolls without slipping down a fixed ramp with negligible dissipative losses. They can measure the vertical drop h of its CM and its CM speed v at the bottom.
(a) [2 pts] Identify the quantities to measure over several trials and state how to vary the independent variable.
(b) [3 pts] Derive a linear relationship suitable for a graph and specify the axes.
(c) [3 pts] State how $I$ can be determined from the slope.
(d) [2 pts] Give one concrete method to reduce random uncertainty and explain why it helps.
Suggested scoring guide
(a) 2 pts: Measure $h$ and $v$ for many release heights while keeping the same wheel and ramp.
(b) 3 pts: $Mgh=\tfrac12Mv^2+\tfrac12I(v^2/R^2)$ gives $h=S v^2$ with $S=(1+I/MR^2)/(2g)$. Plot $h$ vertically versus $v^2$ horizontally.
(c) 3 pts: $2gS=1+I/(MR^2)$, so $I=MR^2(2gS-1)$.
(d) 2 pts: Use many trials across a wide height range and repeated speed measurements; a best-fit slope reduces the influence of random scatter.
LABFRQ 6 · Test angular impulse with a flywheel10 pts
A flywheel of known fixed inertia I rotates about a low-friction fixed axle. A light no-slip string around a hub of known radius r is pulled tangentially with a force sensor while video provides signed angular velocity versus time. Students want to test that net angular impulse equals the change in angular momentum using signed torque–time graph areas. All pulls rotate the wheel in the same sense.
(a) [2 pts] State the measurements required to determine angular impulse and change in angular momentum.
(b) [3 pts] Describe a procedure that produces several useful trials.
(c) [3 pts] Describe a graph whose slope should test the model quantitatively.
(d) [2 pts] Identify one systematic effect that could bias the comparison and how to account for it.
Suggested scoring guide
(a) 2 pts: Measure signed force versus time, hub radius r, and initial/final signed angular velocities. Then $\tau_{app}=rF$ and $\Delta L=I(\omega_f-\omega_i)$.
(b) 3 pts: Perform repeated pulls with several force-time profiles. Use signed areas of the measured rF(t) graph over each matched interval and determine $\Delta\omega$ from endpoint velocity fits.
(c) 3 pts: Plot measured $\Delta L=I\Delta\omega$ vertically against signed net angular impulse horizontally. The ideal slope is 1 and the intercept zero; account for any frictional impulse before calling the area net impulse.
(d) 2 pts: Axle friction supplies an additional opposing external torque. Measure coast-down over the relevant speed range and include its signed angular impulse in the net torque–time area, or show that it is negligible compared with the uncertainty.
QQTFRQ 7 · Person walks inward on a rotating platform8 pts
Model a person as a point mass m on an ideal freely rotating platform whose inertia is negligible. The person moves from radius R to R/2. Initially and finally the person corotates with the platform and has no radial motion. External angular impulse about the fixed axle is negligible. Compare these endpoint states.
(a) [2 pts] Without equations, predict whether the angular speed increases, decreases, or stays the same and justify.
(b) [3 pts] If the platform’s own rotational inertia is negligible, derive the factor by which angular speed changes.
(c) [3 pts] Determine how the rotational kinetic energy changes and explain the source of any change in energy.
Suggested scoring guide
(a) 2 pts: It increases: moving mass inward reduces rotational inertia while total angular momentum remains constant.
(b) 3 pts: $mR^2\omega_i=m(R/2)^2\omega_f$, so $\omega_f=4\omega_i$.
(c) 3 pts: $K=L^2/(2I)$, so reducing $I$ by factor 4 increases $K$ by factor 4. The person does internal work, converting chemical energy into rotational kinetic energy.
QQTFRQ 8 · Changing a planet and escape speed8 pts
Planet B has mass 4M and radius 2R; Planet A has mass M and radius R. Both are nonrotating, have no atmosphere, and are isolated from other bodies. Consider small probes launched outward from their surfaces.
(a) [2 pts] Before calculating, predict whether Planet B’s surface escape speed is greater than, less than, or equal to Planet A’s. Justify qualitatively.
(b) [3 pts] Using energy conservation, derive the escape-speed expression for a planet of mass $M$ and launch radius $R$.
(c) [3 pts] Use your expression to find $v_{esc,B}/v_{esc,A}$ and connect the result to your claim.
Suggested scoring guide
(a) 2 pts: Greater: stronger gravitational binding from greater mass dominates the increase in launch radius.
(b) 3 pts: Set total energy at launch equal to zero at infinity: $\tfrac12mv_{esc}^2-GMm/R=0$, so $v_{esc}=\sqrt{2GM/R}$.
(c) 3 pts: $v_B/v_A=\sqrt{(4M/2R)/(M/R)}=\sqrt2$, consistent with the prediction.