PHYSICS CREST — Global Physics Academy Reach the Peak of Understanding.
1
AP Physics 2 · Unit 12
Magnetism & Electromagnetism
Unit 12 at a glance
Four official topics, 12–15% of the AP multiple-choice weighting: moving charge creates magnetic fields; magnetic fields can exert forces on moving charge and current; currents create magnetic fields; and a changing magnetic flux can create an emf. AP expects you to move among vector diagrams, right-hand reasoning, functional relationships, graphs, experiments, and symbolic derivations.
The question to ask all unit: “What is moving, what field exists, and what is changing?” If you identify those three things first, most magnetism problems become much shorter.
12.1 · Magnetic Fields
A magnetic field can exert a force on moving charges, while changing flux can induce an electric effect.
Distinguish force due to existing motion from induced current caused by change.
Magnetic field $\vec B$
A magnetic field is a vector field used to predict magnetic interactions with moving charges, electric currents, and magnetic materials. Magnetic fields are produced by moving charge and by magnetic dipoles or combinations of dipoles.
No magnetic monopoles
A physical magnet is a dipole: it has north and south polarity. If you cut a bar magnet in half, you get two smaller dipoles—not an isolated north pole and south pole.
How to read field maps
At each point the tangent to a field line gives the direction of $\vec B$. Closer field-line spacing conventionally represents a stronger field. Field lines never cross because a vector field has only one direction at a point.
Compass model
A small compass is itself a magnetic dipole. Its north-seeking end tends to align with the local magnetic field direction. A compass therefore samples the direction of $\vec B$ at its location.
AP trap · field line ≠ particle path
A field line is a representation of the field. A charged particle does not automatically travel along a magnetic field line; its path depends on its velocity and charge as well as $\vec B$.
Quick Check 1
A bar magnet is cut into three pieces. How many magnetic poles exist in total on the three pieces?
Six poles. Each piece becomes a north–south dipole, so there are three north poles and three south poles.
2
Topic 12.1
Dipoles, Materials & Permeability
Where magnetism in matter comes from
Magnetic dipoles arise from circular or rotational motion of electric charge. In matter, electron motion and magnetic moments provide microscopic dipoles. The magnetic behavior of the whole material depends on how those dipoles respond to an external field.
Material response
What the dipoles do
AP-level idea
Ferromagnetic
Domains can align strongly with an external field.
Materials such as iron, nickel, and cobalt can retain substantial alignment and become permanently magnetized.
Paramagnetic
Dipoles align weakly with the applied field.
Weak attraction; alignment does not remain when the external field is removed.
Diamagnetic
Electronic response produces dipole moments tending opposite the applied field.
Usually a weak opposing response. All materials possess diamagnetic behavior, though another magnetic response may dominate.
Permanent vs induced magnetism
Permanent magnetism and induced magnetism are both system-level results of dipole alignment. The key difference is whether substantial alignment remains after the external cause is removed.
Magnetic permeability
Magnetic permeability describes how strongly a material becomes magnetized in response to an external magnetic field. Free space has the constant permeability $\mu_0$.
Do not treat the permeability of matter as one universal fixed number. In the current AP framework it may depend on composition, temperature, orientation, and field strength. Unit 12 uses $\mu_0$ directly in the long-straight-wire field equation later.
Earth
For AP modeling, Earth’s magnetic field can be approximated as the field of a magnetic dipole. That model is useful for compass reasoning even though Earth’s real field is more complicated.
Quick Check 2
A piece of paramagnetic material is removed from an external magnetic field. What happens to the field-induced alignment?
The weak alignment largely disappears. Paramagnetic dipoles do not remain aligned after the external field is removed.
3
Topic 12.2
Moving Charges Create & Feel Fields
A moving charge creates a magnetic field
A single moving charged object produces a magnetic field. At a chosen observation point, the field direction is perpendicular to both the charge’s velocity and the position vector from the charge to that point.
Speed
At the same geometry, a faster moving charge produces a stronger magnetic field.
Distance
The field becomes weaker as the observation point is farther from the moving charge.
Angle
The field magnitude is greatest when $\vec v\perp\vec r$.
Important AP boundary
The current AP Physics 2 framework requires the dependence and direction of the field from a single moving charge, but it does not list a quantitative point-charge magnetic-field magnitude equation. Do not import a Biot–Savart-style point-charge formula as a required AP equation.
A magnetic field exerts force on moving charge
$F_B=|q|vB\sin\theta$
Here $\theta$ is the angle between $\vec v$ and $\vec B$. The equation above gives the magnitude.
Geometry
Magnitude
What happens?
$\vec v\parallel\vec B$ ($0^\circ$)
$F_B=0$
No magnetic deflection.
$\vec v\perp\vec B$ ($90^\circ$)
$F_B=|q|vB$
Maximum magnetic-force magnitude.
$\vec v$ antiparallel to $\vec B$ ($180^\circ$)
$F_B=0$
No magnetic deflection.
Quantitative angle boundary
For the magnetic force on a moving charge, AP Physics 2 limits quantitative magnitude calculations to $0^\circ$, $90^\circ$, and $180^\circ$. Other angles may still appear in qualitative reasoning.
Quick Check 3
A positive source moves right while P is directly above it. What is the magnetic-field direction at P?
Out of the page: velocity right crossed with the source-to-P vector upward points outward. A negative source reverses that field.
4
Topic 12.2
Right-Hand Reasoning & Magnetic Force
Direction: use the positive-charge route first
For a moving charge, magnetic force is perpendicular to velocity.
It can bend a path without changing speed.
Lenz’s law gives a response opposing the change in flux, so the induced direction depends on whether the original flux is increasing or decreasing.
Draw the velocity direction $\vec v$ and magnetic field $\vec B$.
Use your right hand to determine the direction of $\vec v\times\vec B$ for a positive charge.
If the particle is negatively charged, reverse that force direction.
Check the geometry: $\vec F_B$ must be perpendicular to both $\vec v$ and $\vec B$.
AP justification standard
“Because of the right-hand rule” is usually not a complete justification. State the vector relationship: for example, “For a positive charge, with velocity right and field into the page, the magnetic force is upward; because the particle is negative, the actual force is downward.”
Magnetic force changes direction, not speed
When the magnetic force is the only force and is perpendicular to the velocity, it is perpendicular to the displacement at every instant. Therefore it does no work on the particle.
$W_B=0\quad\Rightarrow\quad \Delta K=0$
The particle’s speed and kinetic energy remain constant, even though its velocity direction changes continuously.
Common mistakes
A stationary charge has no magnetic force from $\vec B$.
The force is not “in the direction of the magnetic field.”
Do not reverse the force for an electron until after finding the positive-charge direction.
The sign of $q$ changes the direction, not the magnitude formula based on $|q|$.
Worked vector check
A proton moves east through a magnetic field directed vertically upward. The magnetic force points south. An electron with the same velocity in the same field would feel a force north because its charge sign reverses the positive-charge result.
Quick Check 4
A charged particle moves exactly opposite to $\vec B$. The charge magnitude doubles. What happens to the magnetic-force magnitude?
It remains zero. The angle is $180^\circ$, so $\sin180^\circ=0$ regardless of the charge magnitude.
5
Topic 12.2
Circular Paths, Crossed Fields & Hall Effect
Perpendicular entry → circular motion
If a charged particle enters a uniform magnetic field with $\vec v\perp\vec B$, the magnetic force is always perpendicular to the velocity. It can therefore supply the inward radial force for uniform circular motion.
More massive particle → larger radius if $v,|q|,B$ are unchanged.
$r\propto v$
Faster particle → larger radius. The $r$–$v$ graph is linear through the origin.
$r\propto1/|q|$
Larger charge magnitude → tighter curvature.
$r\propto1/B$
Stronger field → tighter curvature.
Particle comparison technique
Compare $m/|q|$ before doing arithmetic. In the same $B$ at the same speed, the particle with the larger $m/|q|$ has the larger radius. Opposite charge signs bend in opposite directions.
Crossed electric and magnetic fields
Electric and magnetic forces act independently. If the fields are arranged so the forces oppose, an undeflected particle satisfies
This balance is a derivable application of the Unit 10 electric force and Unit 12 magnetic force. It is useful for reasoning about crossed fields even though “velocity selector” is not a separate Unit 12 topic heading.
Hall effect — qualitative AP treatment
In a conductor carrying moving charge, a magnetic field with a component perpendicular to the charge motion can deflect carriers sideways. Charge separation then creates a transverse electric field and therefore a measurable potential difference across the conductor.
Hall boundary
Know the cause, direction logic, and existence of the transverse potential difference. The current CED does not list a quantitative Hall-voltage formula, so formulas involving carrier density and conductor thickness are not part of the required AP calculation pathway.
Quick Check 5
For electron drift right and B into the page, which strip edge gains electrons?
The lower edge. Magnetic force on positive charge would be up, so electrons are deflected down. The lower edge becomes negative and the upper positive; the resulting downward electric field exerts an upward force on electrons.
Hall direction in the illustrated electron conductor
Electron drift is right and B is into the page. Magnetic deflection is down, so the lower edge gains electrons. The upper edge has an electron deficit. The resulting electric field points down; the electric force on negative electrons points up and balances the sideways magnetic force in steady separation. Conventional current is left, opposite electron drift.
6
Topic 12.3
Magnetic Fields from Currents
Long straight wire
A current-carrying wire creates a magnetic field. Around a long straight wire, the field vectors are tangent to concentric circles centered on the wire.
$\boxed{B=\dfrac{\mu_0 I}{2\pi r}}$
Here $r$ is the perpendicular distance from the wire’s axis.
Functional dependence
At fixed $r$: $B\propto I$ → a $B$ vs $I$ graph is linear through the origin.
At fixed $I$: $B\propto1/r$ → a $B$ vs $r$ graph is inverse, while $B$ vs $1/r$ is linear.
Right-hand grip rule
Point your right thumb in the direction of conventional current. Your curled fingers show the direction of the magnetic field around the straight wire.
Current loop
At the center of a current-carrying loop, the magnetic field is directed along the loop’s axis. Curl the fingers of the right hand with the conventional current; the thumb gives the axial field direction.
Current-loop boundary
The current AP framework explicitly requires the direction of the field at the center of a current loop. It does not list a loop-field magnitude equation or a solenoid-field equation as required Unit 12 relationships.
Superposition: two or more current-carrying wires
For each wire, calculate the magnetic-field magnitude at the point.
Use the right-hand grip rule to determine each field direction.
Add the field vectors. If they oppose along one line, subtract magnitudes with signs.
State the final magnitude and direction.
Worked field superposition
Take the 6.0 A wire on the left and the 2.0 A wire on the right. Two long wires are $0.30\,\mathrm m$ apart and carry currents out of the page. At the midpoint, the fields from the wires point in opposite directions. If the currents are $6.0\,\mathrm A$ and $2.0\,\mathrm A$, then
The net field is upward on the page, the direction produced there by the left $6.0\,\mathrm A$ wire.
Quick Check 6
A long straight wire carries conventional current right. What is its field direction directly above the wire?
Out of the page. Rightward current crossed with the upward displacement to the observation point points outward. The field is tangent to a circle about the wire.
7
Topic 12.3
Force on a Current-Carrying Wire
$\boxed{F_B=I\ell B\sin\theta}$
$\ell$ is the length of the wire segment inside the magnetic field, and $\theta$ is the angle between the conventional-current direction and $\vec B$.
Parallel
$\theta=0^\circ$ → $F=0$.
Perpendicular
$\theta=90^\circ$ → $F=I\ell B$, maximum magnitude.
Direction
Use the right-hand rule with conventional current and $\vec B$; the force is perpendicular to both.
Parallel-wire reasoning
Do not memorize “same currents attract” as an isolated rule. Build it from two steps:
Wire 1 creates a magnetic field at the location of wire 2.
Wire 2 carries current through that external field, so it experiences $F=I\ell B$.
Following the directions shows that parallel currents in the same direction attract, while opposite-direction currents repel.
Multi-stage AP habit
A problem can connect $B=\mu_0I/(2\pi r)$ and $F=I\ell B$. Keep the source of each field clear: first find the field produced by one wire, then use that field to find the force on the other wire.
Symbolic scaling
For two long parallel wires a fixed distance apart, if both currents are doubled, the field created by wire 1 at wire 2 doubles, and the current in wire 2 also doubles. Therefore the magnetic force per unit length becomes four times larger.
Quick Check 7
A wire segment is parallel to a uniform magnetic field. The current triples. What happens to the magnetic force on the segment?
It remains zero because $\sin0^\circ=0$. Increasing current cannot create a magnetic force when the current direction is parallel to the external field.
8
Topic 12.3 · Science Practice
Experimental & Graph Reasoning
What AP wants you to be able to design
Unit 12 explicitly supports experimental procedures that test how the magnetic field near a straight wire depends on current and distance. A good procedure separates variables, specifies measurements, and states what graph would test the model.
Test $B\propto I$
Use a long straight wire with an adjustable DC current and a magnetic-field sensor fixed at perpendicular distance $r$ from the wire.
Record the sensor reading with the current off to estimate the background field; use consistent sensor orientation.
Vary $I$ over several values while keeping $r$ fixed. Record $B$ for each current and account for the background reading consistently.
Repeat readings or use a range large enough that random scatter can be assessed.
Plot $B$ vertically against $I$ horizontally. The model predicts a straight line through the origin after background correction.
$B=\left(\dfrac{\mu_0}{2\pi r}\right)I$
The slope should be $\mu_0/(2\pi r)$.
Test $B\propto1/r$
Hold current $I$ constant.
Measure the perpendicular distance $r$ from the wire’s central axis to the sensor location.
A straight-line graph supports the inverse-distance model. Its slope is $\mu_0I/(2\pi)$.
Using a compass instead
A compass can provide qualitative evidence: greater deflection can indicate a larger wire-produced field when geometry is controlled. A calibrated field sensor is cleaner for a quantitative $B$ graph.
Experimental traps
Do not vary $I$ and $r$ at the same time.
Use perpendicular distance, not a diagonal ruler distance.
Account for Earth/background magnetic field.
Keep the sensor orientation fixed.
Graph intelligence
Relationship
Graph that linearizes it
What slope means
$B\propto I$ at fixed $r$
$B$ vs $I$
$\mu_0/(2\pi r)$
$B\propto1/r$ at fixed $I$
$B$ vs $1/r$
$\mu_0I/(2\pi)$
$r_{\rm path}\propto v$ at fixed particle and $B$
path radius vs speed
$m/(|q|B)$
AP data-analysis rule
Do not say only “the graph is straight, so the equation is correct.” State which transformed variables were plotted and how a linear relationship, intercept, and slope are consistent—or inconsistent—with the physical model.
Quick Check 8
Why is subtracting unsigned field magnitudes generally insufficient to remove Earth’s field?
Fields add as vectors. Record a signed component along the same sensor axis and subtract the zero-current component at the same location. With equal and opposite currents, half the signed reading difference isolates the wire component.
Signed measurements and model controls
The sensor must record a signed component along a fixed axis aligned with the wire’s tangential field. Subtract the zero-current reading at each location, or take half the signed reading difference for equal and opposite currents. Do not subtract unsigned vector magnitudes. Keep the return lead far away and the wire long compared with r. Fit a free intercept to diagnose remaining offsets rather than forcing every fit through zero. Slope units are T/A for B versus I, and T·m for B versus 1/r.
9
Topic 12.4
Magnetic Flux
Flux asks “how much field passes through?”
Magnetic flux through a surface depends on the component of $\vec B$ perpendicular to the surface and on the surface area.
$\boxed{\Phi_B=BA\cos\theta}$
The angle $\theta$ is measured between $\vec B$ and the area vector, which is perpendicular to the surface—not between $\vec B$ and the plane itself. For a closed surface, the area vector is defined outward.
Orientation
θ
Flux
$\vec B$ perpendicular to the surface (parallel to area vector)
$0^\circ$
$+BA$ for the chosen positive normal; maximum magnitude
$\vec B$ lies in the plane of the surface
$90^\circ$
$0$
$\vec B$ antiparallel to the chosen area vector
$180^\circ$
$-BA$
How flux can change
Change $B$
Strengthen, weaken, or reverse the magnetic field through the area.
Change $A$
Move a loop into/out of a field region or change the enclosed area in the field.
Change $\theta$
Rotate the surface relative to the magnetic field.
Rotating-loop graph reasoning
If $B$ and $A$ are constant while the area vector rotates uniformly, $\Phi_B=BA\cos\theta$ varies smoothly between $+BA$ and $-BA$. AP may ask for a qualitative flux-versus-time sketch or a functional comparison without requiring calculus.
Angle trap
If a problem gives the angle between $\vec B$ and the plane, that is not automatically $\theta$. Use the complementary angle to get the angle between $\vec B$ and the area normal.
Quick Check 9
A loop is rotated from its plane perpendicular to $\vec B$ to its plane parallel to $\vec B$. What happens to $|\Phi_B|$?
It decreases from its maximum value $BA$ to zero. When the loop plane becomes parallel to $\vec B$, the area vector is perpendicular to $\vec B$.
Choose the sign convention first
$\Phi=BA\cos\theta$ applies to a uniform field over a flat area. Choose either normal for an open surface. Its positive traversal/current direction follows the right-hand rule: an outward normal toward the viewer corresponds to counterclockwise traversal. Reversing the chosen normal reverses signed flux and emf together; physical current is unchanged. Outward normals are required for a closed surface.
An induced emf requires changing magnetic flux. A nonzero magnetic field by itself is not enough.
Graph route
Read the change in flux over each interval.
Find the slope $\Delta\Phi_B/\Delta t$.
The emf magnitude is the absolute slope.
With a chosen sign convention, the induced emf has the opposite sign: $\varepsilon=-\Delta\Phi_B/\Delta t$.
Flat flux graph → zero induced emf.
Direction: Lenz’s law
Lenz’s law: the induced current creates a magnetic field that opposes the change in magnetic flux that produced the induction.
Name the external flux direction through the loop.
State whether that external flux is increasing or decreasing.
Choose the induced magnetic field that opposes that change.
Use the right-hand grip rule to determine the corresponding induced current direction.
The single most important induction trap
Lenz’s law does not mean “the induced field always points opposite the external field.” If an inward external flux is decreasing, the induced field is inward because it tries to preserve that inward flux.
Moving into a field region
A loop moving through a uniform field can have different induction behavior at different positions:
partially entering: area inside the field changes → flux changes → emf is induced;
fully inside a uniform field and translating without rotation: $B$, enclosed area in field, and orientation are constant → flux is constant → no emf;
partially leaving: area inside the field changes → flux changes → emf is induced.
Induction + magnetic-force chain
If the induced current flows through wire segments that are in the magnetic field, those segments can also experience $F=I\ell B\sin\theta$. Find the induced-current direction first, then apply the wire-force rule segment by segment and add the force vectors. This is how a changing-flux problem can become a net-force problem.
AP multi-stage bridge
Once an induced emf exists in a closed loop with resistance $R$, Unit 11 returns:
If the emf and power remain constant for a time $\Delta t$, the thermal energy dissipated is $E=P\Delta t$.
Quick Check 10
Outward flux falls from +8 mWb to +2 mWb in 3 s. With outward positive normal and counterclockwise positive traversal, find average signed emf.
The flux change is −6 mWb, so average emf is +2 mV. The positive direction is counterclockwise; its outward field opposes the decrease in outward flux.
Average and instantaneous emf
$\varepsilon_{avg}=-\Delta\Phi/\Delta t$ gives an interval average. On a straight flux segment it also gives the constant emf there. For a smooth graph, instantaneous emf follows the negative local slope: zero at smooth extrema and greatest in magnitude at the steepest points. Sharp idealized corners do not supply a unique slope. Induced emf can exist in an open path; sustained loop current requires a closed conducting circuit.
11
Topic 12.4
Motional emf: Rod on Rails
Derive the motional-emf relationship
If the rod of length $\ell$ moves a distance $\Delta x$ in time $\Delta t$, the loop area changes by $\Delta A=\ell\Delta x$.
$\varepsilon=B\ell v$ is not a separate magic rule. It is Faraday’s law simplified for a straight rod moving perpendicular to a uniform $B$ while changing the loop area at rate $\ell v$.
Current and magnetic drag
If the rails and rod form a closed circuit with resistance $R$:
$I=\dfrac{B\ell v}{R}$
The current-carrying rod in the magnetic field experiences a magnetic force. With perpendicular geometry,
$F_B=I\ell B=\boxed{\dfrac{B^2\ell^2v}{R}}$
Lenz’s law makes this magnetic force oppose the motion that is increasing or decreasing the flux.
Average-force technique
If the rod travels from $x_i$ to $x_f$ in time $t_f-t_i$ at constant or specified average speed, first write
$v_{\rm avg}=\dfrac{x_f-x_i}{t_f-t_i}$
then substitute into $F=B^2\ell^2v/R$. This is a classic example of AP combining a representation of motion with induction and force.
Where the energy comes from
The external agent pushing the rod supplies mechanical energy. For steady motion, external power balances electrical/thermal dissipation:
$P_{\rm mech}=Fv=\dfrac{B^2\ell^2v^2}{R}=I^2R$
Energy misconception
Do not say “the magnetic field gives the circuit energy.” Magnetic force can redirect moving charges, but the energy dissipated in the resistor is supplied by the external mechanical work that maintains the rod’s motion.
Quick Check 11
For the same $B$, $\ell$, and $R$, the rod speed doubles. By what factor do induced emf, magnetic drag force, and resistor power change?
The rod, rails and fixed finite resistance form a closed loop; B, ℓ and R are constant. Ignore self-inductance and maintain contact. For changing speed, $F(t)=B^2\ell^2v(t)/R$, so the time-average drag uses time-average speed. Power is proportional to $v(t)^2$: do not replace average squared speed by the square of average speed. With no load, motional voltage may remain nonzero but sustained current and ideal magnetic drag vanish.
12
Unit 12 · AP Technique
Representation & Reasoning Toolkit
1 · Vector-triad audit
Draw the relevant vectors before touching an equation.
For charge force: identify $\vec v$, $\vec B$, and $\vec F_B$.
For wire force: identify current direction, $\vec B$, and $\vec F_B$.
For a negative charge, find the positive-charge result first and then reverse it.
When justifying, describe the vector directions explicitly—not just the name of a hand rule.
2 · Functional-dependence audit
Model
Keep fixed
Prediction
$r=mv/(|q|B)$
$m,|q|,B$
$r\propto v$
$B=\mu_0I/(2\pi r)$
r
$B\propto I$
$B=\mu_0I/(2\pi r)$
$I$
$B\propto1/r$
$F=I\ell B$ for perpendicular geometry
two of $I,\ell,B$
linear in the remaining factor
$|\varepsilon|=|\Delta\Phi|/\Delta t$
same flux change
shorter time → larger emf
$F_{\rm drag}=B^2\ell^2v/R$
$\ell,v,R$
$F\propto B^2$
3 · Induction decision tree
Define the surface and area-vector direction.
Write $\Phi_B=BA\cos\theta$.
Ask which of $B$, $A$, or $\theta$ changes.
If flux is constant, $\varepsilon=0$.
If flux changes, find the rate of change for the emf magnitude.
Use Lenz’s law for direction: oppose the change.
If the loop is closed, use circuit relationships for current, power, and energy.
Four current FRQ routines — what Unit 12 can demand
Mathematical Routines
Derive emf from changing flux, then connect to current, force, power, or energy.
Translation Between Representations
Move among field maps, particle paths, flux graphs, emf graphs, and symbolic relationships.
Experimental Design & Analysis
Test $B$ vs $I$ or $B$ vs $r$, specify controls, linearize data, and interpret slope.
Qualitative/Quantitative Translation
Make a qualitative claim from a functional relationship, derive the relevant expression, then check consistency.
What a strong justification sounds like
Weak: “The force is upward by the right-hand rule.” Strong: “For positive charge moving right in a field into the page, $\vec v\times\vec B$ points upward, so the magnetic force is upward; if the charge were negative, the force would reverse.”
Quick Check 12
A loop is completely inside a uniform magnetic field and translates rigidly at constant velocity without rotating. Is an emf necessarily induced?
No. If $B$, the area enclosed in the field, and the orientation are constant, the magnetic flux is constant, so Faraday’s law gives zero induced emf.
13
Unit 12 Review
Master Sheet
Required / directly AP-supported relationships
Idea
Relationship
Critical condition / meaning
Magnetic force on moving charge
$F_B=|q|vB\sin\theta$
Direction perpendicular to $\vec v$ and $\vec B$; charge sign sets direction.
Field of long straight wire
$B=\mu_0I/(2\pi r)$
$r$ is perpendicular distance from wire axis.
Force on current-carrying wire
$F_B=I\ell B\sin\theta$
$\ell$ is wire length within the field.
Magnetic flux
$\Phi_B=BA\cos\theta$
$\theta$ is between $\vec B$ and the area vector.
Faraday–Lenz
$\varepsilon_{avg}=-\Delta\Phi_B/\Delta t$
Interval-average emf. The minus sign represents opposition to the flux change with a consistent normal/traversal convention.
Motional emf
$|\varepsilon|=B\ell v$
Rod-on-rails geometry with perpendicular motion/field.
Important derivable tools
Circular path
$r=mv/(|q|B)$
Derived from magnetic force = radial force for $v\perp B$.
Crossed-field balance
$v=E/B$
Derived from $|q|E=|q|vB$ when electric and magnetic forces oppose.
Rod current
$I=B\ell v/R$
Combine motional emf with Ohm’s law.
Rod magnetic drag
$F=B^2\ell^2v/R$
Combine $I=B\ell v/R$ with $F=I\ell B$.
Rod power
$P=Fv=I^2R=\varepsilon^2/R$
Connect mechanical work to circuit energy transfer.
Non-negotiable AP boundaries
Moving-charge magnetic force: quantitative angle calculations are limited to $0^\circ$, $90^\circ$, and $180^\circ$; other angles may be qualitative.
Field from one moving point charge: know dependencies and direction; no required magnitude formula is listed.
Hall effect: qualitative charge-separation and potential-difference reasoning; no required Hall-voltage magnitude formula is listed.
Current loop: know the field direction at the center/along the axis by the right-hand rule; no required loop-field magnitude equation is listed.
Solenoid magnitude formulas and transformer turns-ratio calculations are not Unit 12 required relationships in the current CED.
Final exam traps
Vectors
Field line ≠ particle path.
Negative charge reverses force direction.
Magnetic force is perpendicular to motion in the circular-path model.
Superpose magnetic fields as vectors, not unsigned numbers.
Induction
Angle for flux is measured from the area normal.
A magnetic field alone does not guarantee induced emf.
Lenz opposes the change in flux.
Mechanical work supplies the energy in the rod-on-rails generator model.
Unit 12 in one sentence: Moving charge creates magnetic fields; magnetic fields redirect moving charge and currents; and when the magnetic flux through a circuit changes, the circuit responds with an induced emf whose direction resists that change.
Quick Check 13
A rod-on-rails generator has nonzero motional emf. Does that guarantee sustained current?
No. A closed conducting path with finite resistance is required. An open circuit can have charge separation and nonzero terminal voltage with no sustained current.
Scope authority: uploaded College Board AP Physics 2 Course and Exam Description, Unit 12 topics 12.1–12.4. Companion questions are original PHYSICS CREST learning items; suggested rubrics are not official scoring guides.