Skip to lesson
PCPHYSICS CREST
PHYSICS CREST — Global Physics Academy
Reach the Peak of Understanding.
1

Unit 14 · Waves, Sound, and Physical Optics

The unit in one sentence: waves transfer energy without transporting matter; AP asks you to connect physical situations to wave diagrams, graphs, equations, boundary behavior, resonance, diffraction, interference, and thin-film phase reasoning.
Current AP scope
14.1 Properties of Wave Pulses and Waves14.2 Periodic Waves14.3 Boundary Behavior of Waves and Polarization14.4 Electromagnetic Waves14.5 The Doppler Effect14.6 Wave Interference and Standing Waves14.7 Diffraction14.8 Double-Slit Interference and Diffraction Gratings14.9 Thin-Film Interference
Non-negotiable boundaries
  • Doppler effect: qualitative only; do not use a source/observer Doppler formula.
  • EM spectrum: know the ordering, not exact wavelength ranges.
  • Thin-film quantitative work is limited to normal incidence.
  • Unit 15 relationships such as photon energy are not Unit 14 content.

14.1 · Properties of Wave Pulses and Waves

  • Wave phenomena connect oscillation, travelling patterns and superposition.
  • Interference depends on phase relationships; diffraction reveals spreading at openings and edges.
  • Polarization identifies transverse oscillations.
Core model
A wave pulse is a single disturbance; a periodic wave repeats. Both transfer energy between locations without transferring matter between those locations. Mechanical waves require a medium; electromagnetic waves do not.

Transverse

Disturbance perpendicular to propagation. Examples: string waves and EM waves.

Longitudinal

Disturbance parallel to propagation. Sound is modeled as longitudinal pressure variations: compressions and rarefactions.

$v_{string}=\sqrt{\dfrac{F_T}{\mu}}\qquad \mu=\dfrac{m}{L}$
Factor-change technique
At fixed $\mu$, quadrupling tension doubles wave speed. At fixed tension, quadrupling $\mu$ halves wave speed. The horizontal length of a uniform string does not by itself set pulse speed. For sound in a given gas, the CED expects the qualitative result that sound speed increases as the medium temperature increases.
Quick Check 1
Two strings have the same tension. String B has four times the linear mass density of String A. Compare pulse speeds.
$v_B=v_A/2$ because $v\propto1/\sqrt{\mu}$.
Longitudinal sound: particle spacings at one instant; arrow is propagation directionsound propagates rightHorizontal string driven between a support and pulley; hanging load at restMuniform string; tension F_T; density μL
What amplitude measures
Transverse amplitude is the maximum displacement from equilibrium. A pressure-wave amplitude is the maximum pressure change from its equilibrium pressure. Compressions have higher pressure and rarefactions lower pressure. Increasing amplitude increases loudness and carried wave energy; it does not by itself set the wave speed.
2

Periodic Waves & Representations

14.2 · Periodic Waves

$T=\dfrac1f\qquad v=f\lambda$
Read the axis before reading the wave
  • A displacement-versus-time graph at one location gives the period from horizontal repeat spacing.
  • A displacement-versus-position graph at one instant gives the wavelength from horizontal repeat spacing.
  • Amplitude is the maximum displacement from equilibrium and is independent of period and frequency.
Recorded displacement (cm) versus time t (s) with labeled scalesdisplacement (cm)time t (s)00.40.81.21.6-22Recorded displacement (cm) versus position x (m) with labeled scalesdisplacement (cm)position x (m)00.81.62.43.2-22Example of the same wave: λ = 1.6 m; T = 0.8 s; v = 2 m/s.

Sound

Frequency is related to pitch. Greater amplitude corresponds to greater loudness.

Energy

The energy carried by a wave increases with amplitude; the CED also states that wave energy increases with frequency.

Sinusoidal representations
At one position, a sinusoidal wave may be represented as $y(t)=A\cos(2\pi f t+\phi)$. At one instant, a spatial representation may be written $y(x)=A\cos(2\pi x/\lambda+\phi)$. AP uses these to connect amplitude, repeat spacing, phase, period, and wavelength; do not confuse a time graph with a snapshot in space.
Sound-particle trap
Air molecules in a sound wave oscillate back and forth around equilibrium positions. They do not travel with the sound disturbance from source to listener. For sinusoidal motion, after half a period its displacement reverses sign. A molecule at zero displacement at the initial instant is also at zero half a period later; the wave still does not carry the molecule along with it.
Medium change
When a wave crosses a boundary, its frequency does not change. If speed changes, wavelength changes so that $v=f\lambda$ remains consistent.
Quick Check 2
A 12 Hz wave enters a medium where its speed is 25% smaller. What happens to frequency and wavelength?
Frequency remains 12 Hz. Wavelength becomes 75% of its original value because $\lambda=v/f$.
Your turn · Find wave speed for frequency 250 Hz and wavelength 1.2 m.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

3

Boundaries, Reflection & Polarization

14.3 · Boundary Behavior of Waves and Polarization

  • A source fixes frequency when a wave crosses a stationary boundary; speed and wavelength can change.
Upward incident string pulse at a two-string junction; outgoing pulses unknownA: smaller μB: larger μjunction; same tensionLater reflected and transmitted string pulses with correct orientationsreflected on Atransmitted on Bseparate later snapshot; amplitudes schematicLight and ideal polarizers with supplied transmission axes; unknown outputlightdetectorfilter 1filter 2axes shown; output not supplied
Reflection of string pulses at equal tension
  • If the transmitted wave enters a medium where wave speed decreases, the reflected pulse is inverted.
  • If transmitted speed increases, the reflected pulse is not inverted.
  • A transmitted wave is also produced; frequency remains the source frequency.
Polarization
Transverse waves can be polarized so oscillation is restricted to one plane. Longitudinal waves cannot be polarized. Polarization can reduce wave intensity.
$I=\dfrac{P_{avg}}{A}$
What AP needs for intensity here
Intensity is average power transferred per unit area over one period. Do not import extra optics formulas that are not listed in Unit 14.
Quick Check 3
An upward pulse travels from a thin string into a thicker string under the same tension. What directions do the reflected and transmitted pulses initially have?
The transmitted pulse continues into the thicker string. Because the wave speed decreases, the reflected pulse is inverted (downward).
Ideal endpoints and polarization
A fixed string end reflects an upright pulse inverted; a freely moving ideal loose end reflects it upright. For an ideal string junction at equal tension, greater mass per length means slower transmission and inverted reflection. For light, parallel polarizer axes pass the permitted electric-field oscillation; crossed ideal axes block it. Only qualitative polarization and I = Pavg/A are used here; no Malus-law calculation is required.
4

Electromagnetic Waves

14.4 · Electromagnetic Waves

Plane-wave model
Electromagnetic waves consist of oscillating electric and magnetic fields that are mutually perpendicular and also perpendicular to the direction of propagation. Therefore EM waves are transverse and can propagate through vacuum.
Electromagnetic wave propagation; transverse field axes drawn in perspectivepropagation +xE direction (y)B direction (z)Three perpendicular directions in perspective.Electromagnetic categories in descending wavelength; qualitative ranges onlydecreasing wavelength →radiomicrowaveinfraredvisibleUVX-raygamma

EM spectrum — decreasing wavelength

Radio → Microwave → Infrared → Visible → Ultraviolet → X-ray → Gamma

Visible light — decreasing wavelength: Red → Orange → Yellow → Green → Blue → Violet.

Boundary
Know the ordering, not exact wavelength ranges. All EM waves travel at the same speed $c$ in vacuum.
Quick Check 4
Compare the vacuum speeds of a radio wave and a gamma ray.
They are equal: all electromagnetic waves in vacuum travel at $c$. Their wavelengths and frequencies differ.
5

The Doppler Effect

14.5 · The Doppler Effect

  • For Doppler shifts, distinguish source motion from observer motion.
Qualitative only
AP Physics 2 requires qualitative Doppler reasoning, not numerical source/observer Doppler calculations.
Source and observer with stated directions; correctly offset earlier sound wavefrontsSOuniform still air; source frequency fixedsource motionearlier wavefronts from their earlier emission positions

Approaching

Observed frequency is greater than the rest frequency.

Receding

Observed frequency is less than the rest frequency.

Same velocity

If source and observer move together with the same velocity, observed frequency equals rest frequency.

Moving-medium trap
Identify motion relative to the wave medium. For sound in moving air, consider both source and observer motion relative to the air. A source at rest relative to the air can still be Doppler shifted for an observer moving relative to that air.
Quick Check 5
An ambulance approaches a stationary observer, passes, then recedes. How does observed pitch compare with the siren rest pitch before and after passing?
Before passing: higher. After passing: lower. No numerical Doppler formula is required.
6

Interference, Superposition & Beats

14.6 · Wave Interference and Standing Waves

Superposition
Overlapping waves pass through one another. At each point, the resultant displacement is the algebraic sum of the individual displacements.

Constructive

Same-direction displacements add, increasing resultant amplitude.

Destructive

Opposite-direction displacements subtract, reducing resultant amplitude.

Individual coincident pulse profiles; summed result shownpulse A at P: 5 mmpulse B at P: -3 mmresult during overlap at P: 2 mm
Beats
Two waves of slightly different frequency repeatedly move into and out of phase, producing periodic amplitude changes.
$f_{beat}=|f_1-f_2|$
Connect beats to wavelength
If two sound waves travel in the same medium, first find $f_1=v/\lambda_1$ and $f_2=v/\lambda_2$, then take the absolute difference.
Quick Check 6
Two tones are 512 Hz and 506 Hz. What beat frequency is heard?
$|512-506|=6\,\text{Hz}$.
Cancellation is an instant, not destruction
Equal opposite displacements can add to zero during an overlap. Ideal pulses then continue through each other. A flat instantaneous string profile does not establish zero particle velocity or destroyed wave energy.
Two in-phase coherent waves have path difference one wavelength. Their interference is…

7

Standing Waves & Resonance

14.6 · Standing waves

  • For standing waves, boundary conditions decide which nodes or antinodes must occur.
Nodes and antinodes
Standing waves form from waves confined to a region and traveling in opposite directions. A node has zero amplitude; an antinode has maximum amplitude. Allowed wavelengths are set by the region size and boundary conditions.
SystemBoundary patternAllowed harmonicsUseful relationship
String fixed at both endsnodes at both ends1,2,3,…$\lambda_n=2L/n$
Open-open air columndisplacement antinodes at both ends1,2,3,…$\lambda_n=2L/n$
Closed-open air columndisplacement node at closed end, antinode at open endodd only$\lambda_n=4L/n$, $n=1,3,5,…$
Pressure versus displacement in an air column
At an open end, displacement amplitude is maximum but pressure amplitude is zero. At a closed end, displacement amplitude is zero but pressure amplitude is maximum. Do not draw pressure and displacement nodes at the same place.
Standing wave on a fixed-fixed string with 3 loops; opposite extreme shapesobserved extreme string shapesLNNNNAAAAir column closed at left and open at right; displacement fundamental shownclosedopenlength L; ignore end correctionsextreme longitudinal-displacement graphsGraph: normalized oscillation amplitude versus position from closed end / Lposition from closed end / Lnormalized oscillation amplitude00.5100.51displacement amplitudepressure amplitude
String + hanging mass routine
Read loop count → find $\lambda=2L/n$ → use $v=f\lambda$ → use $v=\sqrt{F_T/\mu}$. If a hanging mass supplies tension and is at rest, $F_T=mg$. After a change, a standing wave exists only if the new harmonic condition is satisfied.
Quick Check 7
A fixed-fixed string shows 5 loops. If tension is unchanged and the oscillator frequency is reduced to 3/5 of its value, how many loops fit at resonance?
The wave speed is unchanged, so wavelength increases by $5/3$. Harmonic number scales with frequency, so $n=3$: three loops.
Amplitude versus instantaneous displacement
A node has zero displacement at all times. An antinode has the largest local oscillation amplitude, but its displacement can pass through zero. The air-column curves above are spatial amplitude envelopes, not a bent-air-particle path. At the closed end pressure amplitude is maximal and displacement amplitude zero; at the open end the reverse holds. Ideal pipe formulas ignore end corrections; constant end corrections cancel when comparing successive resonance lengths.
8

Single-Slit Diffraction

14.7 · Diffraction

Diffraction
Diffraction is wave spreading around an obstacle or through an opening. It is most pronounced when the opening size is comparable to the wavelength.
$\Delta D=a\sin\theta$
Single-slit minima: $a\sin\theta=m\lambda\quad(m=1,2,3,\ldots)$
Small-angle form
For $\theta<10^\circ$, $\sin\theta\approx\tan\theta\approx y/L$, so $y_{min,m}\approx m\lambda L/a$.
single opening geometry with given dimensions; no interference outcome suppliedmonochromatic lightscreenaLθPPhysical single-slit intensity, broad central lobe and weaker side lobesrelative intensityposition on screen; center at 0single-slit diffraction intensity
Functional dependence
$y_{min}\propto\lambda L/a$. Doubling slit width halves every small-angle minimum distance; increasing wavelength spreads the pattern.
Quick Check 8
The slit width is tripled while wavelength and screen distance stay fixed. How does the distance to the first minimum change?
It becomes one-third as large because $y_{min,1}\propto1/a$.
One-sided distance versus full width
The first minimum is a one-sided distance $y_1$ from the center. The full central width is $W=2y_1$. A perpendicular screen gives $y/L=\tan\theta$ exactly. The interference condition contains $\sin\theta$; replace both with $y/L$ only when the angle is small. For a single-slit minimum, opposite wave contributions pair and cancel; its condition differs from a two-slit maximum.
9

Double Slits & Diffraction Gratings

14.8 · Double-Slit Interference and Diffraction Gratings

$\Delta D=d\sin\theta$
double opening geometry with given dimensions; no interference outcome suppliedmonochromatic lightscreencenter-to-center dLPhysical double-slit intensity under a single-slit enveloperelative intensityposition on screen; center at 0finite-slit envelope shownWhite central maximum and dispersed visible colors, red outwardcentral maximumwhite light grating: one higher order on each side
Maxima: $d\sin\theta=m\lambda$
Small-angle form
$y_{max,m}\approx m\lambda L/d$ for $\theta<10^\circ$. Adjacent maxima are uniformly spaced in the interference-only model.
Do not forget the envelope
A real double slit has finite slit width: the fine interference maxima/minima sit inside a broader single-slit diffraction envelope.
Diffraction grating
Many evenly spaced openings produce numerous superposed diffraction/interference contributions, giving narrow principal maxima. For white light, the central maximum is white; higher orders spread into colors, with red farthest from the center.
Experimental linearization
To determine slit spacing with known $\lambda$, vary $L$ and measure a consistent-order maximum position $y_m$. For small angles, $y_m=(m\lambda/d)L$: plot $y_m$ versus $L$; slope $=m\lambda/d$. Or, if $L$ is fixed and multiple known wavelengths are available, plot fringe spacing against $\lambda$.
Grating data
Without the small-angle assumption, use $d\sin\theta=m\lambda$. Plot $\sin\theta$ vertically against order $m$ horizontally; slope $=\lambda/d$.
Quick Check 9
For fixed $\lambda$ and $L$, slit separation is reduced by a factor of 4. What happens to fringe spacing?
It increases by a factor of 4 because $\Delta y\propto1/d$.
10

Thin-Film Interference

14.9 · Thin-Film Interference

Quantitative boundary
AP quantitative thin-film analysis is limited to waves incident normally on the surface.
Reflection phase rule
  • Reflection from a boundary to a greater refractive index → $180^\circ$ phase change.
  • Reflection from a boundary to a lower refractive index → no phase change.
  • Refraction itself does not change the wave phase at the boundary.
Three refractive indices and thin-film thickness at normal incidence; top and bottom reflected pathsabove: n₁film: n_fbelow: n₃tnormal incidenceR₁R₂Vertical paths; adjacent lanes separate rays for visibility.
Reliable method: phase ledger
1) Compare the three refractive indices. 2) Record whether each reflected ray gets 0 or $\pi$. 3) Add the round-trip phase from traveling through thickness $2t$ using wavelength in the film $\lambda_{film}=\lambda_0/n$. 4) Decide constructive or destructive.
Relative reflection phase shiftsConstructive reflected lightDestructive reflected light
same (0 or two $\pi$ shifts)$2nt=m\lambda_0$$2nt=(m+\tfrac12)\lambda_0$
different (exactly one $\pi$ shift)$2nt=(m+\tfrac12)\lambda_0$$2nt=m\lambda_0$
Minimum nonzero thickness
If a condition allows $m=0$ and gives $t=0$, that is not a film. For a minimum nonzero thickness, use the first integer that gives $t>0$.
Quick Check 10
Air is above a film, and the substrate has still higher refractive index: $n_{air}<n_{film}<n_{sub}$. How many reflection phase reversals occur?
Two. Both reflections are from lower to higher refractive index, so their relative reflection phase shift is zero.
Define the wavelength and the phase reference
$\lambda_0$ is the vacuum wavelength; inside a homogeneous film of index $n_f$, $\lambda_f=\lambda_0/n_f$. The table describes the first two reflected rays at normal incidence. Equal reflection shifts contribute zero relative phase; one reversal contributes $\pi$. Destructive phase interference gives a minimum, with complete cancellation only if the two amplitudes match. The simplest coating between air and a higher-index substrate has $t=\lambda_0/(4n_f)$ under the stated index ordering.
11

AP Exam Intelligence · Unit 14

Evidence patternWhat to doTechnique
string pulse setuprank speed / infer reflection$v=\sqrt{{F_T/\mu}}$ + speed-change inversion rule
time/position waveformextract $T$, $f$, $\lambda$read horizontal repeat on the correct axis
moving source/observerrank observed frequencyqualitative relative-motion reasoning only
standing-wave string/pipederive, sketch, decide resonanceboundary conditions + $v=f\lambda$
slit/grating experimentlinearize / use slopechoose axes from the governing relation
thin filmsketch phase/wavelength, derive thicknessreflection phase ledger + round trip

Four AP FRQ routines

MR

Derive/calculate, then connect mathematics to physical behavior.

TBR

Translate among diagrams, graphs, equations and verbal models.

EDA

Design a reproducible procedure, reduce uncertainty, linearize data, use a best-fit slope.

QQT

Make a qualitative claim, derive quantitative reasoning, and show consistency.

Master relationship sheet

String wave speed$v=\sqrt{{F_T/\mu}}$
Periodic wave$T=1/f$, $v=f\lambda$
Intensity definition$I=P_{avg}/A$
Beats$f_{beat}=|f_1-f_2|$
Single slit$a\sin\theta=m\lambda$ minima; small angle $y_{min,m}\approx m\lambda L/a$
Double slit / grating$d\sin\theta=m\lambda$ maxima; small angle $y_{max,m}\approx m\lambda L/d$
Thin filmUse $\lambda_{film}=\lambda_0/n$, round trip $2t$, and reflection phase shifts
High-frequency traps
  • Using quantitative Doppler formulas.
  • Changing frequency when a wave crosses media.
  • Confusing particle motion with wave propagation.
  • Putting pressure and displacement nodes at the same location in a pipe.
  • Using a small-angle formula when the angle is not small.
  • Forgetting the single-slit envelope around double-slit fringes.
  • Counting thin-film phase shifts without comparing refractive indices.
Unit 14 representation choicesGraph referencetime repeat → periodspace repeat → wavelengthOptical referencesingle slit → minimadouble slit / grating →maxima
Quick Check 11

A single-slit central maximum has full width 10.0 mm. What one-sided first-minimum distance belongs in the diffraction relation?

5.00 mm. The width spans both sides of the center, so halve it before using the one-sided minimum distance.

Scope authority: uploaded College Board AP Physics 2 CED, Unit 14 topics 14.1–14.9. Companion questions are original learning items with suggested scoring guidance.