Skip to lesson
PCPHYSICS CREST
PHYSICS CREST — Global Physics Academy
Reach the Peak of Understanding.
1

Unit 15 · Modern Physics

The unit in one sentence: quantum physics connects photons, matter waves, atomic energy levels, thermal radiation, photon–electron interactions, nuclear processes, and probabilistic decay while conservation laws remain central.
Current AP Physics 2 scope · 12–15% exam weighting
15.1 Quantum Theory & Wave-Particle Duality15.2 Bohr Model15.3 Emission & Absorption Spectra15.4 Blackbody Radiation15.5 Photoelectric Effect15.6 Compton Scattering15.7 Fission, Fusion & Nuclear Decay15.8 Types of Radioactive Decay
Progress-check intelligence

Train four routines: symbolic derivation, translation between representations, experimental design/linearization, and qualitative claims supported by equations or conservation principles.

15.1 · Quantum Theory and Wave-Particle Duality

  • Modern physics uses quantized energy, photons and nuclear models to explain evidence that classical descriptions alone cannot.
  • Link each model to an observation such as a line spectrum, threshold frequency or decay pattern.
Core quantum model

Classical physics cannot explain atomic spectra, blackbody radiation, or the photoelectric effect. At atomic scales, light and matter can show both particle-like and wave-like behavior.

Photons

Photon energy:

$$E=hf=\frac{hc}{\lambda}$$

Photons are massless and electrically neutral.

Matter waves

de Broglie wavelength:

$$\lambda=\frac{h}{p}$$

For nonrelativistic motion, $p=mv$.

Particle double-slit technique

Use momentum to find de Broglie wavelength, then use wave-interference geometry. Greater momentum gives a smaller matter wavelength and tighter fringe spacing.

Formula selection

Use $\lambda=c/f$ for electromagnetic radiation in vacuum; use $\lambda=h/p$ for material particles.

Quick Check 1

An electron beam has its momentum doubled. How does its de Broglie wavelength change?

It halves because $\lambda=h/p$.
Photon traveling toward localized detector; only stated incident properties suppliedschematic; arrows indicate propagationvacuum wavelength λ₀localized detectorMaterial particle double slit with recorded interference bandsbeamelectrons, one at a timescreenL; slit spacing d
State the medium and the model
In $E=hc/\lambda_0$, $\lambda_0$ is the vacuum wavelength. In a transparent medium, frequency and photon energy stay fixed at the boundary, while $v=c/n$ and $\lambda=v/f$ decrease. Material particles use $\lambda=h/p$; $p=mv$ is a nonrelativistic approximation. Photon momentum in the vacuum Compton model is $p=E/c=h/\lambda_0$. A quantum wave model becomes essential when wavelength is comparable to the system’s dimensions. A localized electron impact and a many-impact interference distribution are compatible evidence of duality.
A photon’s frequency doubles. Its energy…

2

Bohr Model & Atomic Structure

15.2 · The Bohr Model of Atomic Structure

Atomic bookkeeping
  • $Z$ = protons and identifies the element.
  • $A$ = protons + neutrons; isotopes share $Z$ but differ in neutron number.
  • Neutral atom: electrons = protons. An ion has nonzero net charge.
Historical Bohr orbit with charge, separation and tangential velocity; four-wave standing-wave condition+Zee⁻rvhistorical circular Bohr modelfour complete wavelengths fit around this orbit
First-principles derivation

For a one-electron atom/ion with nuclear charge $+Ze$, electric attraction supplies centripetal force:

$$\frac{k_eZe^2}{r^2}=\frac{m_ev^2}{r}$$
$$v=\sqrt{\frac{k_eZe^2}{m_er}}$$

With $U=-k_eZe^2/r$ and $K=\tfrac12m_ev^2=k_eZe^2/(2r)$:

$$E=K+U=-\frac{k_eZe^2}{2r}$$

This supports radius/speed/force/energy comparisons without memorizing a special case.

Standing-wave orbit condition
$$2\pi r=n\lambda_{dB}$$

Only specific standing-wave conditions are allowed in the historical Bohr model.

AP boundary

Study energy levels; orbital shapes and probability functions are outside scope.

Quick Check 2

If an allowed orbit has a larger radius, does the total energy become more negative or less negative?

Less negative: $E=-k_eZe^2/(2r)$ approaches zero as $r$ increases.
Historical model, specified allowed states
The Bohr circle is a historical model, not a directly measured literal electron path. Its Coulomb and centripetal force relations explain the given orbit comparisons. The standing-wave condition is $2\pi r=n\lambda$ for a positive integer $n$. Do not assume that any arbitrarily chosen radius is an allowed state. Nuclear notation is $^{A}_{Z}X$; neutron number is $A-Z$. Removing electrons changes ion charge but not element or isotope identity.
3

Emission & Absorption Spectra

15.3 · Emission and Absorption Spectra

  • Photons have E = hf.
  • Atomic transitions select photon energies equal to energy-level differences.
  • Nuclear energy accounting uses mass differences with consistent definitions.
  • A model predicts what changes when frequency, intensity or observation time changes.
Single-electron energy diagram; correctly scaled levels -9, -4, -1 eV; transition arrows shownsingle-electron atom; energy (eV)0-9-4-1Recorded emission lines at given energiesexample emission photon energies (eV)358
Transition energy
$$E_\gamma=|\Delta E|=hf=\frac{hc}{\lambda}$$
  • Absorption moves the atom to a higher state if the photon energy exactly matches a gap.
  • Emission occurs during a downward transition.
  • Ionization requires enough energy to reach $E=0$ from a bound state.
Representation technique

Spectrum lines correspond to differences between energy levels, not to the level energies themselves. List pairwise gaps before converting to $f$ or $\lambda$.

Emission

Bright lines = emitted photon frequencies.

Absorption

Missing/dark frequencies = absorbed photon frequencies.

AP boundary

Only single-electron atomic energy-level diagrams are considered.

Quick Check 3

Levels are at $-9$ eV, $-4$ eV, and $-1$ eV. What is the lowest photon energy absorbed from the ground state?

$5\,\text{eV}$.
Bound lines versus ionization
For a bound-to-bound transition, photon energy must match a level gap. Ionization is different: a photon at or above the binding energy can free an electron, with excess energy going into kinetic energy and recoil. The $E=0$ ionization limit is not another discrete bound level. Only single-electron energy diagrams are assessed here. The example emission lines show possible ensemble transitions, not three photons necessarily emitted by one atom; line heights and populations are not fixed by the energy diagram.
4

Blackbody Radiation

15.4 · Blackbody Radiation

Planck blackbody spectra: continuous distributions on shared axes; T, 1.3Tradiated power per area per wavelengthwavelength (same linear scale)T1.3T
Continuous spectrum

A blackbody is an ideal absorber/emitter. Its emitted spectrum is continuous and depends on temperature.

Wien

$$\lambda_{\max}=\frac{b}{T}$$

Hotter → shorter peak wavelength.

Stefan–Boltzmann

$$P=\sigma AT^4$$

Total emitted power is strongly temperature-dependent.

Factor-change method
$$\frac{P_2}{P_1}=\frac{A_2}{A_1}\left(\frac{T_2}{T_1}\right)^4$$

For Wien, $\lambda_{\max,2}/\lambda_{\max,1}=T_1/T_2$.

Common mistake

Use kelvin for temperature. Do not confuse a continuous blackbody spectrum with discrete atomic lines.

Quick Check 4

Two equal-area blackbodies are at $T$ and $3T$. What is the power ratio?

$P_{3T}/P_T=3^4=81$.
Interpret the curve and power
These curves use the same wavelength and spectral-power scales and are calculated from the Planck distribution. A hotter ideal blackbody emits more at every positive wavelength, with its peak farther left. The area under spectral power per wavelength gives total emitted power; for spectral power per area per wavelength it gives $P/A$. $P=\sigma AT^4$ is emitted power. In thermal equilibrium absorbed and emitted power balance even though both continue. Use absolute temperature in kelvin.
5

Photoelectric Effect

15.5 · The Photoelectric Effect

Photoelectric tube and measurement circuit; physically correct retarding plate signsmonochromatic illuminationemittercollectorevacuated tubesame emitter; supplied work functionsourceAV+−e⁻retarding bias: collector is at lower electric potential
Einstein model
$$K_{\max}=hf-\phi$$

$\phi$ is the work function. At threshold, $K_{\max}=0$ and $f_0=\phi/h$.

Frequency

Higher $f$ → greater photon energy and greater $K_{\max}$ if above threshold.

Intensity

Above threshold, greater intensity can increase electron rate/current but does not raise $K_{\max}$.

Stopping potential

Reverse the plate voltage until photocurrent reaches zero:

$$eV_s=K_{\max}=hf-\phi$$
$$V_s=\frac{h}{e}f-\frac{\phi}{e}$$

Thus a $V_s$ vs $f$ graph has slope $h/e$. If $h$ is known, $e=h/(\text{slope})$.

Linearization toolkit
  • $K_{\max}$ vs $f$: slope $h$, intercept $-\phi$.
  • $K_{\max}$ vs $1/\lambda$: slope $hc$, intercept $-\phi$.
  • $V_s$ vs $f$: slope $h/e$, intercept $-\phi/e$.

Use multiple trials, broad variable range, repeated measurements, and a best-fit line.

AP boundary

Work functions are provided when needed; do not memorize material values.

Quick Check 5

A metal has $\phi=2.2\,\text{eV}$ and receives a $4.0\,\text{eV}$ photon. What is $K_{\max}$?

$1.8\,\text{eV}$.
Stopping magnitude and polarity
$V_s$ is a nonnegative magnitude. The collector must be at lower electric potential than the emitter to retard negative electrons. The voltmeter measures the potential difference across the tube and the ammeter measures current in series. $K_{\max}$ is the largest emitted-electron kinetic energy, not the energy of every electron. Below threshold, increasing intensity alone does not eject electrons in the ideal single-photon model. At threshold the ideal maximum is zero; do not interpret a negative calculated $K_{\max}$ as a physical kinetic energy.
Your turn · Find maximum photoelectron kinetic energy for photon energy 5.2 eV and work function 2.0 eV.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

6

Compton Scattering

15.6 · Compton Scattering

Compton collision with outgoing photon at 60 degrees; electron momentum vector calculated from conservationincident: 5.00 pmfree electron initially at restscattered: 6.215 pm60°electron recoilPhoton and electron y momenta cancel.
Photon–electron collision

A photon interacts with a free electron. The outgoing photon has lower energy and longer wavelength; the electron recoils. Energy and two-dimensional momentum are conserved.

$$\lambda_f-\lambda_0=\frac{h}{m_ec}(1-\cos\theta)$$
Graph form
$$\lambda_f=\left(\lambda_0+\frac{h}{m_ec}\right)-\frac{h}{m_ec}\cos\theta$$

A graph of $\lambda_f$ vs $\cos\theta$ is a straight line with negative slope. At $\cos\theta=1$, $\lambda_f=\lambda_0$.

Recoil kinetic energy
$$K_e=\frac{hc}{\lambda_0}-\frac{hc}{\lambda_f}$$

Substitute the Compton relation if the result must be written only in terms of $\lambda_0$ and angle.

Momentum-vector technique

Resolve into $x$ and $y$. Transverse photon momentum must be balanced by the electron. Along $x$, $p_{e,x}=p_0-p_f\cos\theta$; use $p=h/\lambda$.

Quick Check 6

At what angle is the Compton wavelength shift largest?

$180^\circ$.
Specify the electron and conserve vectors
The standard shift equation uses a free electron initially at rest. A forward $0^\circ$ limit gives no wavelength change or recoil; nonzero deflection increases wavelength and decreases photon energy. With incident direction $+x$, $p_{e,x}=p_0-p_f\cos\theta$ and $p_{e,y}=-p_f\sin\theta$. The recoil arrow above is calculated from these components for the labeled 60° example. Electron kinetic energy comes from photon energy loss; avoid $K=p^2/(2m_e)$ for high-energy recoil.
7

Nuclear Processes

15.7 · Fission, Fusion, and Nuclear Decay

Nuclear reaction ledger: given parent and products with unknown entries where statedgiven rest mass Miparentfragment 1fragment 2fission example; use all final rest masses in Mf
Nuclear constraints

The strong force dominates nucleon interactions at nuclear scales. Nuclear reactions must satisfy conservation of nucleon number, energy, momentum, and charge where applicable.

Mass–energy accounting
$$E=mc^2$$
$$Q=(M_i-M_f)c^2$$

If total rest mass decreases, positive $Q$ appears as product kinetic energy and/or photons.

Fusion

Smaller nuclei combine into a larger nucleus plus possible subatomic particles.

Fission

A nucleus splits into two or more smaller nuclei plus possible subatomic particles.

Technique

Use the masses/energies and conservation laws supplied in the scenario instead of memorized shortcuts.

Quick Check 7

A process has $M_i=4.0020\,u$ and $M_f=4.0005\,u$. Is energy released or required?

Released, because $Q=(M_i-M_f)c^2>0$.
Masses must describe the complete reaction
$M_i$ and $M_f$ are sums of all initial and final rest masses, including any emitted particles; they are not mass numbers. A positive $Q$ is available to product kinetic energy and photons. A negative $Q$ requires supplied energy. Nucleon number is conserved although rest mass can change. Fission may be spontaneous or require energy input; fusion does not automatically release energy for every possible pair of nuclei. The strong force dominates interactions among nucleons at nuclear distances.
8

Radioactive Decay Mathematics

15.7 · Decay of a Finite Sample

Graph: undecayed original nuclei N versus time (s)time (s)undecayed original nuclei N0481216200400800expected counts; half-life 4 s
Random events, predictable sample

The exact decay time of one nucleus is indeterminable, but the number remaining in a sample follows a predictable exponential model.

$$N=N_0e^{-\lambda t}$$
$$\lambda=\frac{\ln2}{t_{1/2}}$$
Time to a fraction $1/x$
$$\frac1x=e^{-\lambda t}\Rightarrow t_{1/x}=\frac{\ln x}{\lambda}$$

Equal fractional reductions require equal time intervals when $\lambda$ is constant.

Linearization
$$\ln\left(\frac{N}{N_0}\right)=-\lambda t$$

Plot $\ln(N/N_0)$ vs $t$: slope $=-\lambda$. Use a simulation or provided data set; no radioactive material is needed.

Quick Check 8

A sample has $\lambda=0.20\,\mathrm{s^{-1}}$. How long until one tenth remains?

$t=\ln(10)/0.20\approx11.5\,\mathrm{s}$.
What N counts and what the model predicts
$N$ counts undecayed original parent nuclei, excluding daughter nuclei. For finite samples, the smooth exponential gives an expectation; observed counts fluctuate and the decay time of one nucleus is unpredictable. $\lambda$ has reciprocal-time units. Use the same time units in $\lambda t$ and half-life. Repeated large-sample simulations reduce relative statistical fluctuations; a very small surviving count can give a noisy logarithm.
9

Types of Radioactive Decay

15.8 · Types of Radioactive Decay

Conservation ledger

Conserve nucleon number, charge, and lepton number.

DecayProcessDaughter changeEmitted
Alpha $\alpha$nucleus ejects helium-4 nucleus$A-4$, $Z-2$helium-4 nucleus
Beta-minus $\beta^-$neutron → proton$A$ same, $Z+1$electron + antineutrino
Beta-plus $\beta^+$proton → neutron$A$ same, $Z-1$positron + neutrino
Gamma $\gamma$excited nucleus → lower energy state$A$, $Z$ unchangedphoton
Particles to recognize

Neutrinos/antineutrinos are electrically neutral and have negligible mass for this course. A positron has the electron's mass but opposite charge.

Non-negotiable boundary

Do not memorize decay modes or half-lives of specific isotopes. Neutron emission and electron capture are outside the framework. Detailed neutrino taxonomy and weak-force applications are outside scope.

Quick Check 9

In $\beta^-$ decay, what happens to $A$ and $Z$?

$A$ stays the same; $Z$ increases by 1.
Nuclear reaction ledger: given parent and products with unknown entries where statedA, ZparentdaughterA−4, Z−2He-44, 2nuclear alpha decay: worked conservation ledgerNuclear reaction ledger: given parent and products with unknown entries where statedcharge 0neutronprotoncharge +ee⁻ + ν̄charge −enuclear beta− decay: worked conservation ledgerNuclear reaction ledger: given parent and products with unknown entries where statedcharge +eprotonneutroncharge 0e⁺ + νcharge +enuclear beta+ decay: worked conservation ledgerNuclear reaction ledger: given parent and products with unknown entries where statedA, Zexcitedlower stateA, Zphotonno chargenuclear gamma decay: worked conservation ledger
Lepton ledger and isotope-specific modes
For nuclear beta-minus decay, $n\to p+e^-+\bar\nu$; for beta-plus, $p\to n+e^++\nu$. Electron and neutrino lepton numbers are $+1$; their antiparticles are $-1$, so each emitted pair has total zero. A positron has the electron’s mass and opposite charge. Neutrinos are neutral, have negligible mass here and interact very little with ordinary matter. A specified isotope has its own permitted modes; do not imagine that otherwise identical nuclei can freely choose any decay type. Gamma emission changes nuclear energy and rest mass while leaving $A$ and $Z$ fixed.
10

Unit 15 · Exam Intelligence Review

Four FRQ routines to master

MR

Derive and calculate from a fundamental equation, then interpret the result.

TBR

Translate among diagrams, graphs, equations, and words.

EDA

Design a reproducible procedure, reduce uncertainty, linearize data, and use slope/intercept.

QQT

Make a qualitative claim and prove it quantitatively or with conservation reasoning.

Master relationship sheet

Photon$E=hf=hc/\lambda$
Matter wave$\lambda=h/p$
Bohr force$k_eZe^2/r^2=m_ev^2/r$
Bohr energy$E=-k_eZe^2/(2r)$
Atomic transition$E_\gamma=|\Delta E|$
Wien$\lambda_{\max}=b/T$
Stefan–Boltzmann$P=\sigma AT^4$
Photoelectric$K_{\max}=hf-\phi$
Stopping potential$eV_s=K_{\max}$
Compton$\lambda_f-\lambda_0=\dfrac{h}{m_ec}(1-\cos\theta)$
Mass–energy$Q=(M_i-M_f)c^2$
Decay$N=N_0e^{-\lambda t}$
Half-life$\lambda=\ln2/t_{1/2}$
Fraction time$t_{1/x}=\ln x/\lambda$
Final 20-second check
  1. Did I conserve the right quantities?
  2. Did I distinguish level energy from transition energy?
  3. Frequency controls photoelectron $K_{\max}$; intensity controls rate above threshold.
  4. Use ratios for $T^4$ changes.
  5. Decay is multiplicative/exponential, not linear.
  6. Graph slope/intercept must come from the rearranged equation.
Quick Check 10

What is the recurring Unit 15 strategy?

Choose the correct microscopic model, write the governing relationship or conservation law, translate representations carefully, and test the result with functional dependence.
Unit 15 representation choicesPhoton interactionchoose energy gaptrack momentumNuclear processbalance A and chargeinclude all products

Scope authority: uploaded College Board AP Physics 2 CED, Unit 15 topics 15.1–15.8. Companion questions are original learning items with suggested scoring guidance.