Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Build three separate identities—mass, weight and gravitational field strength—then master location changes, balance logic, force-meter readings and the weight–mass gradient method.
Core mass–weight masterySupplement field reasoningATP balance and graph labInteractive notebook
Mass and field strength combine to give weight; balances compare masses and weight–mass graphs reveal the field strength.
1
Two quantities · two identities
Mass and weight
MassA measure of the quantity of matter in an object and is measured in kilograms.
WeightA gravitational force measured in newtons.
Moving an unchanged object to a different world can change weight without changing mass.
A supported object still has weight even when its upward support makes its resultant force zero.
Mass is a measure of the quantity of matter in an object at rest relative to the observer. Weight is the gravitational force acting on an object that has mass.
Keep the identities separate: mass is matter in kilograms; weight is a gravitational force in newtons.
Identity mnemonicM-M-K · W-F-N
Mass = Matter in Kilograms. Weight = gravitational Force in Newtons.
Changing location changes g and therefore weight, but it does not change the object’s mass.
Mass identity
symbol $m$;
kilograms, kg;
scalar—no direction;
unchanged when location changes.
Weight identity
symbol $W$;
newtons, N;
vector—direction matters;
changes when $g$ changes.
Definition marks are strict: “mass times gravity” is an equation, not the definition of weight. State that weight is a gravitational force.
Everyday wording trap: “a weight of 70 kg” is physically a mass of 70 kg. Near Earth its weight is about 686 N.
Pause · explain it yourself
A book rests on a table. Is its weight zero?
Compare, then improve
No. Its downward weight is balanced by the table’s upward force, so the resultant is zero.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
2
Choose · convert · substitute · finish
Calculating weight
W = mg, m = W/g and g = W/m express one relationship.
Identify the unknown and rearrange before substituting.
With g in N/kg, convert grams to kilograms.
The units kg × N/kg cancel to N, helping confirm the calculation.
Cover the required symbol: W = mg, m = W/g, and g = W/m.
$W=mg$ $m=\dfrac{W}{g}$ $g=\dfrac{W}{m}$
$W$weight / N
$m$mass / kg
$g$field strength / N/kg
↓state direction when asked
Weight acts in the direction of the gravitational field; near a planet’s surface this is downward.
Convert grams to kilograms before multiplying by a field strength in N/kg.
Calculation routineC-U-S-F
Choose the rearrangement → convert Units → Substitute → Finish with unit and direction.
Interactive · Weight Calculator
Change mass and field strength
Gram trap: divide grams by 1000 before using a field strength in N/kg. Using 250 instead of 0.250 makes the answer 1000 times too large.
3
Force per kilogram · direction toward the source
Gravitational field strength
Gravitational field strength g is force per unit mass.
A field of 10 N/kg gives 10 N of weight to each kilogram.
Near Earth a value around 9.8 N/kg is usual, but a numerical problem may specify 10 N/kg.
State and use the supplied value consistently.
Gravitational field strength $g$ is the gravitational force per unit mass at a point.
$g=\dfrac{W}{m}$
N/kg literally means gravitational force per kilogram of mass.
Unit meaningN/kg
Read it aloud: newtons of gravitational force on each kilogram.
Weight points in the direction of the gravitational field: toward the attracting body.
Gravitational field strength is a vector. Around a planet its direction—and therefore the direction of weight—is toward the planet’s centre. Near the surface we usually call this direction downward.
These units have the same numerical scale because $1\text{ N}=1\text{ kg m/s}^2$, so $1\text{ N/kg}=1\text{ m/s}^2$. N/kg describes the field; m/s² describes free-fall acceleration when resistance is ignored.The heavier object has more weight, but it also has proportionally more mass, so W/m = g for both.
Why different masses can share one acceleration
The 1.0 kg object has five times the weight of the 0.20 kg object, but also five times the mass. The ratio $W/m$ is $g$ for both.
Interactive · Field Explorer
Same 5.0 kg object, new field
Same numerical value, different wording: $g=9.8$ N/kg describes a field; free-fall acceleration $=9.8$ m/s² describes motion when resistance is ignored.
Do not call $g$ scalar. Calculations commonly use its magnitude, but a gravitational field has direction.
4
Hold one quantity constant and reason proportionally
Changing mass or gravitational field
Numerically, local field strength in N/kg equals the free-fall acceleration in m/s²: both describe gravity’s effect per unit mass.
This does not mean every supported object accelerates.
A table provides an additional force.
Use a force diagram to distinguish weight from resultant force.
Same location: g is constant
At constant g, weight is directly proportional to mass.
$W\propto m$ when $g$ is constant
Same object: mass is constant
Changing location changes g and therefore weight, but it does not change the object’s mass.
$W\propto g$ for the same mass
Same weight: mass changes inversely with field strength
For the same weight, the weaker field requires the larger mass because m = W/g.When an object moves between fields, find its unchanged mass first, then calculate the new weight.
Identify what stays unchanged: usually the object’s mass.
If the original mass is hidden, calculate $m=W/g$.
Use the new supplied $g$ to calculate the new weight.
Check the direction of change: stronger field → larger weight.
Interactive · Same-Weight Explorer
A fixed weight of 30 N
Change the field strength and watch the required mass.
Same weight does not guarantee same mass when the objects are in different fields. Use $m=W/g$ for each location.
Pause · explain it yourself
What changes when a sealed toolbox is taken from Earth to the Moon?
Compare, then improve
Its weight decreases because the gravitational field is weaker. Its mass stays unchanged because its matter is unchanged.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
5
What does the apparatus physically sense?
Measuring mass and weight
A beam balance compares masses through their weights in the same field.
With equal arm lengths, equal masses give equal moments even in a different gravitational field.
A spring force meter measures force through extension and is calibrated in newtons.
Choose by quantity: beam balance compares mass; force meter measures weight; electronic balance displays calibrated mass.
Instrument
Physics mechanism
Report
equal-arm / beam balance
compares weights in the same field
mass in g or kg
force meter / spring balance marked in N
spring deformation responds to force
weight in N
top-pan electronic balance
sensor responds to support force; calibration converts it
mass display in g or kg
At balance, m₁g = m₂g. The common g cancels, so the masses are equal.
$m_1g=m_2g\Rightarrow m_1=m_2$ in the same field
Both weights change by the same factor, so an equal-arm beam balance still compares masses in a different uniform, non-zero field.
Both sides of a beam balance are multiplied by the same $g$. A weaker field reduces both weights by the same factor, so the balance comparison still gives mass.
A force meter directly measures force. When a hanging object is stationary and no other force supports it, the force-meter reading equals its weight in newtons.An electronic balance senses force but is calibrated at its location to display mass. Zero or tare it before the reading. If moved to a place with a different $g$, it needs recalibration to give the correct mass.
After taring with the container in place, the display gives the added sample mass only.
Instrument mnemonicB-C · F-W · E-M
Beam Compares; Force meter gives Weight; Electronic balance displays calibrated Mass.
Zero routine: beam level/pointer at zero; unloaded force meter at 0 N and vertical; empty electronic pan at zero—or tare with the container already in place.
Pause · explain it yourself
Why can an equal-arm balance compare masses on the Moon?
Compare, then improve
Both masses experience the same local g, so equal masses still give equal opposing moments at equal distances.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
6
Straight line · large triangle · physical intercept
Weight–mass graphs
On a weight-against-mass graph, W = mg predicts a straight line through the origin.
With weight on the vertical axis and mass horizontally, gradient is g in N/kg.
Choose widely separated points on the best-fit line rather than nearby noisy measurements.
A steeper line means a stronger field under these axis choices.
For W vertically against m horizontally, the gradient is g in N/kg. A non-zero intercept may reveal a zero offset.
At one location, $W=gm$. If $g$ is constant, weight is directly proportional to mass: a straight best-fit line through the origin.
$\text{gradient}=\dfrac{\Delta W}{\Delta m}=g$
Graph routineP-B-L-G-I
Plot W against m → Best fit → Large triangle → Gradient → inspect Intercept.
Use separate quantity/unit headings and retain every repeated raw reading before calculating a mean.
Large-triangle gradient
Using (0.20 kg, 1.96 N) and (0.80 kg, 7.84 N):
$g=(7.84-1.96)/(0.80-0.20)=9.8\text{ N/kg}$.
Prediction
Read from the best-fit line or use its gradient. For 0.55 kg near Earth, $W\approx(9.8)(0.55)=5.39$ N.
A non-zero no-load force shifts the best-fit line away from the origin.
Interactive · Gradient Calculator
Choose two points on the best-fit line
Use points on the best-fit line, not automatically two raw data crosses. Wide separation reduces the fractional reading uncertainty.
A non-zero intercept is evidence. It may show an uncorrected force-meter zero offset; repeated readings can be precise and still all share that bias.
7
Alternative to Practical
ATP Lab Lens: determine g and defend the result
Hang several known masses, record steady force readings, repeat, plot mean W against m and obtain g from the gradient.
Practical mnemonicZ-S-R-P-G
Zero → Steady mass → Repeats → Plot W against m → Gradient gives g.
SET UP
Clamp vertically, check zero, use a safe range, secure the stand.
MEASURE
At least five well-spaced known masses; wait until stationary; repeat every setting.
ANALYSE
Means, best-fit line, large triangle, gradient in N/kg, intercept check.
Use separate quantity/unit headings and retain every repeated raw reading before calculating a mean.Keep the raw readings, average valid repeats at each mass and plot the means. Draw one suitable best-fit line, then take a large-triangle gradient.
Limitation
Effect
Targeted improvement
force meter not zeroed
all readings shifted; intercept
zero before use or subtract measured offset
mass swinging
unstable reading
wait until stationary; read a steady value
small mass range
small gradient triangle
use a wider safe, well-spaced range
pointer parallax
systematic reading shift
eye normal to pointer and scale
Paired mass readings without tare
Liquid mass is the difference between the full and empty readings; repeat the complete paired method.
Repeatability versus accuracy: use spread/range to compare repeatability; compare with a trusted mass or accepted $g$ to discuss accuracy. Close readings may still share one calibration bias.
Evaluation answer chain: name the limitation → state its effect on the measurement or graph → give a targeted improvement that reduces that mechanism.
8
One-page visual recall
Topic 1.3 Master Sheet
Read the quantity first, choose kg/N/N per kg, then use equation, balance logic or graph gradient.
Equation bank
$W=mg$
$m=W/g$
$g=W/m$
$g=\text{gradient of W against m}$
Memory board
MMK / WFN · identities
CUSF · calculations
N/kg · force per kilogram
BC / FW / EM · instruments
PBLGI · graph method
ZSRPG · ATP method
If the figure shows…
Your first thought
same object on two worlds
mass fixed; weight changes with g
beam balance level
common g cancels; compare masses
force meter
weight in N; check zero and vertical alignment
electronic balance + container
tare or use full − empty
W against m graph
gradient = g; intercept diagnoses offset
different falling masses
same g when resistance is ignored
Final answer audit: grams converted? correct rearrangement? newtons for weight? kilograms for mass? N/kg for field strength? vector direction stated when requested?
Interactive mastery: 0 / 5 explored
Revisit any explorer or instrument check you have not completed.