Skip to lesson
PHYSICS CREST · 2.3 Thermal Energy TransferOverviewConductionConvectionRadiationEnergy balanceApplicationsInsulationMaster sheet
1

2.3 — Thermal Energy Transfer

Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.

Track what moves: energy, particles, or neither?

Ways of transferring thermal energy

Net thermal energy transfer is from a region at higher temperature to one at lower temperature until conditions move towards equilibrium.

How is thermal energy transferred?CONDUCTIONCONVECTIONRADIATIONenergy through particlesfluid moves in bulkinfrared; no medium
Choose the mechanism from the physical process, not from the name of the object.
MechanismWhat moves?Where?
Conductionenergy passes between particles; no bulk flow of the solidall solids; also possible in fluids
Convectionthe fluid itself movesliquids and gases only
Thermal radiationinfrared electromagnetic radiationthrough matter or a vacuum
Exam trap
Do not write “heat rises”. Warm fluid may rise because its density decreases. Thermal energy itself can be transferred in any direction.
Quick Check 1
Which mechanism can transfer thermal energy across empty space?
Thermal radiation (infrared).
2

Conduction

  • In a solid, energetic vibrations transfer energy between neighbouring particles.
  • The whole material does not have to flow from hot to cold.
  • Mobile electrons provide an additional efficient transfer mechanism in metals.
  • Gases generally conduct poorly because particles are widely separated.
  • Trapped air insulates well when circulation is restricted.
  • For a fair rod comparison, control dimensions, material starting temperature and heating conditions.
  • A wax indicator shows warming, but changing rod thickness or flame conditions would confound a comparison.
  • Distinguish the observed melting time from the physical property it is intended to compare.

In a solid, particles at the hotter end have greater vibrational energy. Interactions with neighbouring particles transfer energy through the lattice.

All solids

Lattice vibrations transfer energy from more energetic regions to neighbouring particles.

Metals

Delocalised electrons move through the metal and transfer energy rapidly in addition to lattice vibrations.

Compare conductors fairlysame heating at one endwax + pin / sensorsame length · same cross-sectional area · same sensor distance · same heating
A better conductor gives a faster response at the matched point.

Why gases and most liquids are poor conductors

  • In a gas, particles are far apart, so energy transfer by particle collisions is comparatively ineffective.
  • In many liquids, particles are close but are not locked into a solid lattice and there is no metallic delocalised-electron mechanism.
  • They therefore conduct much less effectively than good metal conductors.
Better wording
Use good conductor / poorer conductor / thermal insulator as comparisons. Many solids lie between excellent conductors and excellent insulators.
Quick Check 2
Why does a metal spoon usually conduct thermal energy better than a wooden spoon?
Both transfer energy through particle interactions, but metals also have mobile delocalised electrons that transfer energy efficiently.

Pause · explain it yourself

Why can metal feel colder than wood at the same room temperature?

3

Convection

  • Heating a fluid usually makes it expand and become less dense.
  • The surrounding denser fluid gives an upward effect, so the warmer fluid rises.
  • Cooler fluid moves in to replace it, producing circulation that carries energy.
  • A low room heater can establish this pattern.
  • Say warm air rises, not heat rises: radiation and conduction can transfer energy in other directions.
  • Solids cannot support ordinary bulk convection because their particles cannot circulate freely.
  • Explain density change through increased volume for the same mass rather than claiming heating removes the mass.

Convection is thermal energy transfer by bulk movement of a liquid or gas.

warm regionwarmer, less dense → risescooler, denser → sinks
A complete convection current needs both an upward and a return flow.
Density chain
warm → expands → density decreases → rises
cool → contracts → density increases → sinks

Experiment to show convection

  1. Put water in a beaker or transparent loop.
  2. Place a tiny coloured crystal/tracer near one lower side.
  3. Heat gently below that side.
  4. Observe the coloured path rise above the heater, move across, sink on the cooler side and return.

Heating a room

Air near a low heater warms, becomes less dense and rises. Cooler air moves in to replace it. The circulation distributes thermal energy around the room.

Quick Check 3
Why does gently heating a liquid from the top produce much weaker convection than heating it from below?
The warmer, less-dense liquid is already above the cooler, denser liquid, so the arrangement is relatively stable and strong bulk circulation is not driven.
4

Thermal radiation

  • All objects emit thermal radiation.
  • It needs no material medium and can cross a vacuum.
  • Dull black surfaces generally absorb and emit infrared well; shiny surfaces reflect well and absorb and emit poorly.

Thermal radiation is infrared electromagnetic radiation. It does not require a medium, so it can transfer energy through a vacuum. All objects emit thermal radiation; hotter surfaces generally emit at a greater rate.

SurfaceInfrared absorptionInfrared emissionReflection
Dull blackgoodgoodpoor
Shiny / light reflectivepoorpoorgood
Fair test of infrared emissiondull black faceshiny faceIR detectorsame distance
Use an infrared detector or thermopile—not an ordinary thermometer pointed at the face.

Emitter experiment

Use surfaces at the same temperature and equal area (for example different faces of a hot-water cube). Place the same infrared detector at the same distance and angle from each surface. Compare detector readings.

Absorber experiment

Use two equal-area, equal-mass samples of the same material with different finishes. Start them at the same temperature, expose them to the same infrared source at equal distance and angle, and compare their temperature rise.

Do not overclaim
A vacuum prevents convection and greatly reduces conduction across the gap, but infrared radiation can still cross the vacuum.
Which mechanism can transfer thermal energy across a vacuum?

5

Emission rate and energy balance

  • At steady temperature, energy still enters and leaves: their rates balance.
  • If incoming rate exceeds outgoing rate, internal energy and usually temperature increase; if outgoing exceeds incoming, the object cools.

The rate at which a surface emits thermal radiation increases when:

constanttemperaturetotal energy input ratetotal energy output ratesteady temperature → input rate = output rate
Constant temperature does not mean that energy transfer has stopped.

If the object receives energy faster than it transfers energy away, its internal energy normally increases and its temperature tends to rise. If it loses energy faster, it tends to cool.

Simplified Earth radiation balance

Earth absorbs part of the incoming solar radiation and emits thermal infrared radiation to space. A change in reflection, absorption or emission changes the balance. The temperature then tends to change until the rates move towards a new balance.

Calculation route
absorbed input = incident − reflected − transmitted (when those routes are given). Then compare total input and total output rates.
Quick Check 4
An object receives 80 W in total and loses 80 W in total. What happens to its temperature if no other change occurs?
It can remain constant because the total rates of energy gain and loss are equal.

Pause · explain it yourself

Why can an object stay at constant temperature while radiating?

6

Applications of thermal transfer

ApplicationExam-ready explanation
Cooking panmetal base conducts energy rapidly to the food/water; a polymer or wooden handle conducts much more slowly
Room heaterair warmed near the heater becomes less dense and rises; cooler air replaces it, forming a convection current
Wood/coal fireinfrared radiation can warm people directly; heated air/gases rise and circulate by convection
Car radiatorenergy conducts through metal tubes/fins, then moving air carries it away mainly by convection
warm air rises and circulatesinfrared can travel directlyperson
Different transfer mechanisms can act at the same time.
Car radiator: two linked transfer stagesmoving airmetal tubes + finshot coolantenergy enters metalthen passes to air
Do not call the whole process “convection”: energy conducts through the metal before moving air carries it away.
Multi-process questions
A single device can use more than one mechanism. Name the mechanism for each stage instead of giving one label for the whole device.
7

Reducing unwanted energy transfer

  • A vacuum flask uses a vacuum to reduce conduction and convection across the gap, reflective surfaces to reduce radiation and a stopper to reduce transfer through the opening.
shiny facing surfacesvacuum gappoor-conducting stopperDifferent features reduce different pathways.
The vacuum does not stop infrared radiation; the shiny surfaces reduce radiative exchange.
Use “reduces”, not “stops”
Real insulation lowers transfer rates. It does not make every pathway exactly zero.

Pause · explain it yourself

Why do small trapped air pockets make useful insulation?

8

Thermal-transfer review

Conduction

solid contact → lattice vibrations
metal → add delocalised electrons
fair rod test → same geometry, heating and sensor position.

Convection

warm → expand → lower density → rise
cool → higher density → sink
name the moving fluid.

Radiation

infrared; no medium needed
dull black: good emitter/absorber
shiny: poor emitter/absorber, good reflector.

Energy balance

constant temperature → total input rate = total output rate
emission increases with surface temperature and area.

Four common traps

  1. Writing “heat rises” instead of explaining the movement of lower-density fluid.
  2. Saying liquid particles are far apart like gas particles.
  3. Saying a vacuum stops radiation.
  4. Using an ordinary thermometer as an infrared detector in an emitter comparison.

Question-reading route

What is moving? If material is flowing, think convection. If energy crosses a solid without bulk flow, think conduction. If it crosses a vacuum, it must be radiation.

Final memory hook
CONTACT → CONDUCTION · CIRCULATION → CONVECTION · IR → RADIATION
·