Skip to lesson
PCPHYSICS CREST
1

Unit 2 · Force and Translational Dynamics

AP Examiner's Note — what this unit is really testing
Unit 2 is a major part of AP Physics 1. The current framework weights it at 18–23%. The difficult part is rarely “knowing $F=ma$.” The difficult part is deciding what system to analyze, identifying the real interactions, translating a free-body diagram into equations, and then defending a prediction when the situation changes.

2.1 · Systems and Center of Mass

Choose the system before choosing the equation
A system is the object or collection of objects you decide to analyze. Interactions between parts inside that boundary are internal; interactions with the environment are external. For the force–acceleration equations here, choose a system of fixed total mass. An open system exchanging mass requires extra care. The same physical scene can be modeled with different systems, and that choice changes which forces appear in the system equation.

The system idea

  • A multi-object system can often be treated as one object at its center of mass.
  • Internal forces can change the motion of individual parts, but cannot by themselves change the motion of the system's center of mass.
  • A nonzero net external force changes the velocity of the center of mass.
  • When only part of a larger situation is selected as the system, interactions crossing the boundary become external.

AP question to ask first

“What am I calling the system?”

A rope tension that is internal to a two-cart system disappears from the whole-system force sum, but the same tension is external when one cart alone is the system.

Center of mass of particles
$$x_{\rm cm}=\frac{\sum m_i x_i}{\sum m_i},\qquad y_{\rm cm}=\frac{\sum m_i y_i}{\sum m_i}$$ For a symmetric object with uniform mass distribution, the center of mass lies on the symmetry lines. For AP Physics 1, quantitative center-of-mass calculations are limited to five or fewer particles in 2D or highly symmetric systems.
xy 1 kg at (0,0) 2 kg at (3,0) 3 kg at (0,4) COM (1,2)

Worked technique: weighted position

Total mass $=1+2+3=6\,\mathrm{kg}$.

$x_{\rm cm}=(1\cdot0+2\cdot3+3\cdot0)/6=1\,\mathrm m$.

$y_{\rm cm}=(1\cdot0+2\cdot0+3\cdot4)/6=2\,\mathrm m$.

Reasonableness check: the COM must lie inside the triangle formed by these masses; compared with equal masses, extra mass shifts the COM toward its location.

Qualitative COM clue
In a uniform gravitational field, the system's weight can be treated as acting through its center of mass. If an object supported at a point is released and one side drops, the COM lies on the side that makes the weight turn the object that way. Use this as a location clue; detailed torque calculations come later.
Common mistake
Doubling every mass leaves the COM unchanged because the common factor cancels. Doubling only selected masses usually moves the COM toward those masses. Never answer a center-of-mass comparison from “symmetry” unless the mass distribution is actually symmetric.
Quick Check 1
Three point masses lie on the x-axis: $1\,\mathrm{kg}$ at $x=0$, $2\,\mathrm{kg}$ at $x=2\,\mathrm m$, and $1\,\mathrm{kg}$ at $x=6\,\mathrm m$. Find $x_{\rm cm}$.
$x_{\rm cm}=(1\cdot0+2\cdot2+1\cdot6)/(1+2+1)=10/4=\boxed{2.5\,\mathrm m}$.
2

Force Inventory → Free-Body Diagram

2.2 · Forces and Free-Body Diagrams

  • A force diagram represents interactions acting on one chosen object or system.
  • Newton’s second law links its resultant external force to acceleration.
  • System choice determines which interactions are external.
A force is an interaction
A force is a vector interaction between two objects or systems. If you cannot name the second object that causes a force, stop and question the arrow. An object cannot exert a net force on itself.
InteractionForce on the chosen objectDirection clue
Earth ↔ objectgravitational force / weighttoward Earth's center (locally downward)
surface ↔ objectnormal forceperpendicular to surface, away from it
rough surface ↔ objectfrictionopposes relative sliding or the tendency to slide
string ↔ objecttensionalong string, pulling away from object
spring ↔ objectspring forcerestoring direction set by the spring deformation
hand/rope/engine ↔ objectapplied/contact forcedirection stated by the interaction
AP FBD grammar — do this exactly
  1. Replace the chosen object/system by a dot.
  2. Draw only real forces exerted on that object/system by its environment.
  3. Each force is a distinct straight arrow starting at the dot and pointing in the force direction.
  4. If two real forces point in the same direction, draw them side by side, not on top of each other.
  5. Do not draw components as extra forces. Resolve components only after the FBD.
sliding uphillθv up slopemgNfₖ down slopeschematic scene; angle and labels specify the data

Axes come after the FBD

For an incline, choose one axis parallel to the surface and one perpendicular. Then resolve $F_g$:

parallel component $=mg\sin\theta$

perpendicular component $=mg\cos\theta$

The components help write equations; they are not additional interactions.

FappNfₛmgforce arrows to a common scale

Partner-first check

Wall on book → $F_N$ and friction.

Earth on book → $mg$.

Hand/device on book → $F_{app}$.

Trap: the normal force is not automatically equal to weight. Here it is horizontal while weight is vertical.

Quick Check 2
A block rests on a rough horizontal floor. A rope pulls upward and right at an angle, but the block remains at rest. Should the FBD include $F\cos\theta$ and $F\sin\theta$ as separate force arrows?
No. Draw one tension/applied-force arrow along the rope. Resolve it into components only when translating the FBD into equations.
3

Newton's Third Law + Tension

2.3 · Newton's Third Law

Interaction pair
If object A exerts a force on object B, object B simultaneously exerts an equal-magnitude, opposite-direction force on object A: $$\vec F_{A\,on\,B}=-\vec F_{B\,on\,A}$$ The two forces act on different objects. That single sentence eliminates most Newton's-third-law mistakes.

Balanced forces

Act on the same object. They may sum to zero.

Example: normal up and weight down on a book at rest.

Third-law pair

Act on different objects and come from the same interaction.

Example: book pushes table down; table pushes book up.

Equal and opposite is not enough
A tension upward and a weight downward on the same object may be equal and opposite, but they are not a Newton's-third-law pair. Ask: “Are the two forces the same interaction between the same two objects, with the roles reversed?”

Ideal strings and pulleys

m₁ = 2 kg m₂ = 3 kg 20 N whole system: tension is internal

System shortcut, then zoom in

Whole system: $a=F_{ext}/(m_1+m_2)=20/5=4\,\mathrm{m/s^2}$.

Cart 1 alone: $T=m_1a=2(4)=8\,\mathrm N$.

If the same 20 N pulls from the opposite end, the whole-system acceleration stays 4, but the internal tension changes because the string must accelerate a different amount of mass.

AP technique — “whole system first”
For connected objects with a common acceleration, first choose the whole collection as the system to eliminate internal tensions. Find $a$. Then isolate one object to find the internal tension/contact force. This often turns a long algebra problem into two short equations.
Quick Check 3
Two carts of masses $2\,\mathrm{kg}$ and $3\,\mathrm{kg}$ are connected on a frictionless track. A $20\,\mathrm N$ horizontal force pulls the $2\,\mathrm{kg}$ cart so that it must pull the $3\,\mathrm{kg}$ cart. Find the common acceleration and string tension.
Whole system: $a=20/(2+3)=4\,\mathrm{m/s^2}$. The string must accelerate the $3\,\mathrm{kg}$ cart, so $T=3(4)=\boxed{12\,\mathrm N}$.
4

Equilibrium Is About Velocity, Not “No Motion”

2.4 · Newton's First Law

Translational equilibrium
$$\sum \vec F=0\quad\Longrightarrow\quad \vec a=0\quad\Longrightarrow\quad \vec v=\text{constant}$$ Constant velocity includes rest as the special case $\vec v=0$. An object can therefore be moving and still be in equilibrium.

Straight-line constant speed

Velocity vector is constant → acceleration zero → net force zero.

Constant speed around a curve

Direction of velocity changes → acceleration is nonzero → net force is nonzero.

constant velocitynet force = 0 v (tangent)a (inward)constant speed ≠ constant velocity

Force changes velocity — not necessarily speed

A force component parallel or antiparallel to velocity changes speed.

A force component perpendicular to velocity changes direction.

In uniform circular motion, the inward force changes direction continuously while speed can remain constant.

Representation reasoning
If the forces balance in $y$ but not in $x$, then $a_y=0$ while $a_x\neq0$. Treat axes independently. “Balanced vertically” never proves the whole object is in equilibrium.

Inertial reference frame

An inertial frame is one in which Newton's first law is verified: with zero net force, velocity remains constant. AP problems assume an inertial frame unless stated otherwise.

A cart moves right while its net force points left. What initially happens?

Quick Check 4
A sled slides down a straight hill at constant velocity. Is it in translational equilibrium? What must be true about the component of the net force along the hill?
Yes. Constant velocity means $\vec a=0$, so $\sum\vec F=0$. Along the hill, downhill components must exactly balance uphill components.
5

Translate the FBD into Newton's Second Law

2.5 · Newton's Second Law

  • Draw each actual force once, then resolve components.
  • Newton’s third-law partners act on different objects.
  • Motion at constant velocity requires zero resultant force, not necessarily zero applied forces.
Center-of-mass acceleration
$$\sum \vec F_{\rm ext}=m_{\rm sys}\vec a_{\rm cm}$$ The acceleration points in the direction of the net external force, not necessarily in the direction of motion.
1 SystemWhat object(s)?
2 InteractionsWho pushes/pulls?
3 FBDReal forces only
4 AxesChoose smart directions
5 Equations$\sum F_x=ma_x$, $\sum F_y=ma_y$
F = 50 N; 37°N = 70 Nmg = 100 Nfₖ = 14 Nforce arrows to a common scale

Worked example: angled pull

$m=10\,\mathrm{kg}$, $F=50\,\mathrm N$, $\theta=37^\circ$, $\mu_k=0.20$, $g=10\,\mathrm{m/s^2}$.

Vertical acceleration is zero:

$N+F\sin37^\circ-mg=0$ → $N=100-30=70\,\mathrm N$.

$f_k=\mu_kN=14\,\mathrm N$.

Horizontal: $F\cos37^\circ-f_k=ma$ → $40-14=10a$.

$\boxed{a=2.6\,\mathrm{m/s^2}}$.

Constraint-first comparison
If a crate is pulled at a fixed upward angle and is required to keep constant speed, increasing $\mu_k$ does not mean “change only the friction arrow.” The required pulling force also changes, which changes its vertical component and therefore $N$. Write the two equilibrium equations together before ranking any force: $T\cos\theta=f_k$ and $N+T\sin\theta=mg$.
Normal force is not automatically $mg$
An upward component of an applied force reduces $N$; a downward component increases $N$. Because friction often equals $\mu N$, an angled force can change friction even when $\mu$ is unchanged.
Functional dependenceFor fixed mass: $a\propto F_{net}$.
Functional dependenceFor fixed net force: $a\propto 1/m$.
Work backward
If an equation is given, reconstruct the physics: signs reveal axis choices, each force term should correspond to a real interaction, and the acceleration term tells which direction is unbalanced. AP questions often test whether an equation matches a diagram rather than asking for a final number.
Your turn · Find acceleration for a 4.0 kg object with net force +10 N.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

Quick Check 5
For the same $10\,\mathrm{kg}$ crate, the pulling force is still $50\,\mathrm N$ but becomes horizontal. With $\mu_k=0.20$ and $g=10\,\mathrm{m/s^2}$, find the acceleration.
$N=mg=100\,\mathrm N$, so $f_k=20\,\mathrm N$. Net horizontal force $=50-20=30\,\mathrm N$, hence $a=30/10=\boxed{3.0\,\mathrm{m/s^2}}$.
6

Connected Systems + Apparent Weight

2.5/2.6 · System Choice Under Acceleration

Connected-system routine
Whole system: use only external forces to find the common acceleration. Then isolate: choose one part and use Newton's second law to find an internal tension/contact force.
Nmgupward net force; acceleration upward

Apparent weight = normal force

A scale does not directly read $mg$; it reads the contact force $N$.

Taking upward positive:

$$N-mg=ma\quad\Rightarrow\quad N=m(g+a)$$

If acceleration is downward, $a$ is negative and the scale reading decreases.

SituationScale reading / apparent weightMeaning
no vertical acceleration$N=mg$normal reading
accelerating upward$N>mg$appears heavier
accelerating downward but slower than free fall$0<N<mg$appears lighter
free fall$N=0$apparent weightless
Velocity direction does not determine apparent weight
An elevator can be moving upward while slowing down. Then its acceleration is downward and $N<mg$. Always use acceleration, not the direction of motion.
Equivalence principle — AP idea
Inside an accelerating, noninertial frame, support-force effects can mimic a change in gravity. A local observer who only feels or measures apparent weight cannot, from that information alone, distinguish the effect of the frame's acceleration from a corresponding gravitational effect.

Free-falling connected objects

If two connected blocks are freely falling and gravity is the only external force, both accelerate at $g$. An ideal connecting string need not pull to keep them together, so its tension can be zero. “There is a string” does not automatically mean “there is tension.”

Third law survives every elevator motion
The force of the scale on the person and the force of the person on the scale are always equal in magnitude and opposite in direction because they are a third-law pair. The scale reading can still differ from $mg$ because $mg$ is a different interaction.
Quick Check 6
A $60\,\mathrm{kg}$ person stands on a scale in an elevator accelerating downward at $2.0\,\mathrm{m/s^2}$. Use $g=10\,\mathrm{m/s^2}$. What does the scale read?
Take up positive: $N-mg=m(-2)$. Thus $N=60(10-2)=\boxed{480\,\mathrm N}$. The elevator may be moving either up or down; only its acceleration matters.
7

Gravity Is a Force and a Field

2.6 · Gravitational Force

Universal gravitation$$F_g=G\frac{m_1m_2}{r^2}$$
Field strength$$g=\frac{F_g}{m}=G\frac{M}{r^2}$$
mass M center distance r Field directions; arrow lengths not to scale.

Inverse-square thinking

Double one mass → $F_g$ doubles.

Double both masses → $F_g$ becomes $4F_g$.

Double center distance → $F_g$ and $g$ become one quarter.

Triple center distance → one ninth.

Weight and apparent weight are different ideas
For a relatively small object near an astronomical body, weight is the gravitational force $F_g=mg$. Apparent weight is the normal/contact force measured by a support or scale.
Earth-likeM, R new planet2M, 2R

Worked ratio: mass and radius both change

$$\frac{g'}{g}=\frac{2M/(2R)^2}{M/R^2}=\frac{2}{4}=\frac12$$

So an object's mass is unchanged, but its weight is half as large.

Multiple gravitating bodies
Compute each gravitational force vector separately, then add the vectors. The inverse-square law gives each magnitude; geometry gives each direction. Never add magnitudes when the forces point in different directions.
Quick Check 7
At the same distance from the center, the planet mass is changed from $M$ to $3M$. By what factor do (a) gravitational field strength and (b) the gravitational force on the same test mass change?
Both are directly proportional to the planet mass at fixed $r$, so both become $\boxed{3}$ times larger.
8

Friction: Solve the Tendency First

2.7 · Kinetic and Static Friction

Kinetic$$f_k=\mu_kN$$
Static$$0\le f_s\le \mu_sN,\qquad f_{s,\max}=\mu_sN$$
Static friction is not automatically $\mu_sN$
Static friction takes the value and direction needed to prevent relative slipping, up to its maximum. Use $f_s=\mu_sN$ only at the threshold of slipping.
friction magnitudeapplied forcestatic: fₛ = Fappfₛ,maxkinetic fₖ

Read the graph physically

Before slipping, increasing the applied force simply makes static friction grow to match it.

At impending motion, $f_s$ reaches $\mu_sN$.

Once sliding begins, the model uses $f_k=\mu_kN$, typically with $\mu_k<\mu_s$.

Direction: oppose relative slipping, not blindly “motion”

A box in a braking truck can be moving downhill while static friction points uphill because the truck is slowing and friction must produce the needed uphill acceleration. Determine what the surfaces would do relative to each other without friction; friction resists that relative slipping.

constant speed downθv down slopemgNfₖ up slopeschematic scene; angle and labels specify the data

Constant speed down a rough ramp

Parallel: $mg\sin\theta-f_k=0$.

Perpendicular: $N=mg\cos\theta$.

With $f_k=\mu_kN$:

$$\boxed{\mu_k=\tan\theta}$$

This is a useful derivation because $m$ and $g$ cancel.

Force picture → speed–time graph
Suppose a sled moves down a rough ramp at constant speed, then reaches a horizontal surface made of the same material. On the ramp, the along-slope net force is zero, so the speed–time graph is horizontal. On the horizontal, kinetic friction is the only horizontal force, so the acceleration is constant opposite the motion and the speed decreases linearly. This is the representation translation AP often asks for.
Two famous friction traps
Contact area: in the AP ideal model, kinetic friction does not depend on apparent contact area. Wall press: if a book is held at rest by a horizontal push stronger than the minimum needed, static friction can still simply equal $mg$; it does not jump to $\mu_sN$.
Quick Check 8
A $2.0\,\mathrm{kg}$ book is pressed horizontally against a wall with $N=80\,\mathrm N$. If $\mu_s=0.50$ and the book is at rest, use $g=10\,\mathrm{m/s^2}$ to find the actual static friction.
The book needs $20\,\mathrm N$ upward to balance its weight. The maximum possible static friction is $\mu_sN=40\,\mathrm N$, so the actual friction is only $\boxed{20\,\mathrm N}$ upward.
9

Spring Force: Deformation, Direction, and Graphs

2.8 · Spring Forces

Hooke's law
For an ideal spring, the force is proportional to the change in length from the spring's relaxed length: $$\vec F_s=-k\,\Delta\vec x$$ The minus sign encodes a restoring direction: the spring pushes/pulls opposite the deformation.
00signed spring force Fₛsigned deformation xslope = −k

Graph intelligence

A plot of spring force versus deformation is linear for an ideal spring.

Slope $=-k$ if signed force is graphed against signed displacement.

If magnitudes $F$ versus extension $x$ are graphed, slope $=k$.

Larger $k$ → steeper graph → stiffer spring.

Relaxed length vs equilibrium position

Hooke's law measures deformation from the relaxed length. In a horizontal spring with no other force along the spring, relaxed length is also the equilibrium position. For a hanging mass, gravity shifts the system's equilibrium to a stretched position where $kx=mg$.

2 kgx = 0.10 m if k = 200 N/m 5 kgx = 0.25 m

Vertical equilibrium

$kx=mg\Rightarrow x=mg/k$.

At fixed $k$ and $g$, extension is proportional to mass.

Trap: if mass doubles, the extension doubles — not the spring's total length.

Spring on an incline at equilibrium
If a block on a frictionless incline is attached to a spring along the slope and held at rest, $kx=mg\sin\theta$. The spring extension is set by the component of weight along the incline, not by the full weight.
Spring inside a multi-object system
If two carts are joined by a spring, the spring forces are internal when both carts are chosen as one system. The whole-system acceleration comes from external forces; then isolate a cart and use $F_s=kx$ to find the spring stretch or compression.
Motion right after release
A compressed spring pushing a block toward relaxed length can exert a decreasing force magnitude while the block's speed increases. Force magnitude tells acceleration magnitude at that instant; it does not directly tell whether the object is speeding up. Compare acceleration direction with velocity direction.
Determine $k$ experimentally
Hang several known masses, wait for equilibrium, measure extension $x$, and plot $F=mg$ against $x$. A best-fit line should have slope $k$. Repeating measurements and using several loads is better than calculating $k$ from one trial.
Quick Check 9
A spring of relaxed length $0.30\,\mathrm m$ has $k=200\,\mathrm{N/m}$. A $4.0\,\mathrm{kg}$ mass is slowly lowered to equilibrium. Use $g=10\,\mathrm{m/s^2}$. Find the equilibrium extension and total spring length.
$x=mg/k=40/200=0.20\,\mathrm m$. Total length $=0.30+0.20=\boxed{0.50\,\mathrm m}$.
10

Circular Motion: Inward Is a Direction, Not a New Force

2.9 · Circular Motion

Radial acceleration$$a_c=\frac{v^2}{r}$$
Radial Newton II$$\sum F_{\rm inward}=m\frac{v^2}{r}$$
Never add a mysterious “centripetal force”
“Centripetal” describes the inward net force requirement. The inward force may be tension, friction, gravity, normal force, or a combination of real-force components. Draw those real forces on the FBD, then make their radial sum equal to $mv^2/r$.
v tangent ac inward at only if speed changes

Two acceleration components

Centripetal/radial: changes the direction of velocity and points toward the center.

Tangential: changes the speed and points tangent to the path.

When speed changes on a curved path, total acceleration is the vector sum of radial and tangential components.

Vertical circle: minimum speed at the top

For an object on the inside of a vertical loop, or a ball held by a string, inward at the top is downward. At the minimum speed that maintains contact/tension, the contact or tension force can drop to zero, leaving gravity alone:

$$mg=m\frac{v_{min}^2}{r}\quad\Rightarrow\quad\boxed{v_{min}=\sqrt{gr}}$$
rθθ from verticalLTmghorizontal circular path at constant height

Conical pendulum derivation

Vertical equilibrium: $T\cos\theta=mg$.

Horizontal inward: $T\sin\theta=mv^2/r$.

Divide equations:

$$\tan\theta=\frac{v^2}{rg}$$

Therefore $v=\sqrt{rg\tan\theta}$ with $r=L\sin\theta$.

Claim test: a massive bob cannot have the string perfectly horizontal because then tension would have no vertical component to balance gravity.

Quick Check 10
An object moves in a vertical circle of radius $2.5\,\mathrm m$. Use $g=10\,\mathrm{m/s^2}$. For a ball on a string or an object on the inside of a circular loop, what is the minimum speed at the top to maintain the path?
$v_{min}=\sqrt{gr}=\sqrt{10(2.5)}=\boxed{5.0\,\mathrm{m/s}}$.
11

Banked Curves, Period, and Circular Orbits

2.9 · Circular Motion Continued

Period and frequency$$T=\frac1f,\qquad T=\frac{2\pi r}{v}$$
Useful scaling$$a_c\propto\frac{v^2}{r}$$
θbank angle θinwardNmgcross-section; circle center lies to the left

Frictionless banked curve

$N\cos\theta=mg$

$N\sin\theta=mv^2/r$

Divide: $$\boxed{\tan\theta=\frac{v^2}{rg}}$$

Current AP Physics 1 expects quantitative banked-curve analysis when no friction is required. If friction is required on the bank, analysis is limited to qualitative reasoning.

Circular orbit: gravity is the inward force

MvFg

Set gravity equal to the radial net force:

$$\frac{GMm}{r^2}=m\frac{v^2}{r}$$

$$\boxed{v=\sqrt{\frac{GM}{r}}}$$

The satellite mass cancels. Larger orbital radius means lower circular-orbit speed.

Kepler's third law for circular orbits

Use $T=2\pi r/v$ with $v=\sqrt{GM/r}$:

$$\boxed{T^2=\frac{4\pi^2}{GM}r^3}$$

Radius scaling

At fixed central mass: $T\propto r^{3/2}$ and $v\propto r^{-1/2}$.

Mass scaling

At fixed radius: $v\propto\sqrt M$ and $T\propto1/\sqrt M$.

Unit boundary
For Unit 2, use circular orbits and Kepler's third-law relation. Do not import Kepler's first/second laws, escape velocity, gravitational potential, or elliptical-orbit energy into this unit. Those belong outside this Unit 2 boundary.
Quick Check 11
A satellite remains in circular orbit around the same planet but at four times the orbital radius. By what factors do its circular speed and period change?
$v\propto r^{-1/2}$, so speed becomes $1/\sqrt4=\boxed{1/2}$ as large. $T\propto r^{3/2}$, so period becomes $4^{3/2}=\boxed{8}$ times as large.
12

AP Lab Thinking + Unit 2 Master Sheet

Experimental Design and Analysis

Test Newton II

Keep total mass fixed, vary net external force, measure acceleration, and plot $a$ vs $F_{net}$. Slope $=1/m$.

Measure $\mu_s$

Increase ramp angle until an object is just about to slip. At threshold, $mg\sin\theta=\mu_smg\cos\theta$, so $\mu_s=\tan\theta$. Repeat trials.

Measure spring constant

Use known masses to apply $F=mg$, measure extension, plot $F$ vs $x$. Best-fit slope $=k$.

Test circular-orbit law

Vary $r$, measure $T$, plot $T^2$ vs $r^3$. A linear graph supports $T^2\propto r^3$; slope links to central mass.

What earns strong experimental reasoning
  • Name measured quantities and the instrument or method.
  • Change the independent variable over a useful range and hold relevant controls fixed.
  • Repeat measurements to reduce random uncertainty.
  • Choose transformed variables that make the predicted relationship linear when useful.
  • State exactly what the best-fit slope/intercept means physically.
  • Use units on graph axes and on the derived quantity.

The four AP free-response routines — Unit 2 version

Mathematical Routines: start from Newton's second law (or another stated fundamental relation), resolve only needed components, derive symbolically, then check limiting behavior.
Translation Between Representations: move among physical scene ↔ interaction list ↔ FBD ↔ component equations ↔ acceleration/velocity graph. A correct diagram must tell the same story as the algebra.
Experimental Design and Analysis: design a way to determine $k$, $\mu$, mass, or a force-law relationship; choose graph axes; interpret slope; reduce uncertainty.
Qualitative/Quantitative Translation: make a physical claim first, derive or use a relationship, then explain why the equation and claim are consistent when a parameter changes.

Master equations

Center of mass$x_{cm}=\frac{\sum m_ix_i}{\sum m_i}$ (and similarly for $y$)
Newton I / equilibrium$\sum\vec F=0\Rightarrow\vec v=\text{constant}$
Newton II$\sum\vec F_{ext}=m_{sys}\vec a_{cm}$
Newton III$\vec F_{AonB}=-\vec F_{BonA}$
Universal gravity$F_g=Gm_1m_2/r^2$
Gravitational field$g=F_g/m=GM/r^2$; near surface weight $=mg$
Friction$f_k=\mu_kN$; $f_s\le\mu_sN$
Spring force$\vec F_s=-k\Delta\vec x$
Circular motion$a_c=v^2/r$; $\sum F_{inward}=mv^2/r$
Period/frequency$T=1/f$; $T=2\pi r/v$
Frictionless bank$\tan\theta=v^2/(rg)$
Circular orbit$v=\sqrt{GM/r}$; $T^2=4\pi^2r^3/(GM)$

Final answer routine

System → interactions → FBD → axes → Newton equation → symbolic route → units → direction/sign → limiting-case check.

High-value traps
  • normal force $\neq mg$ automatically
  • static friction $\neq\mu_sN$ automatically
  • friction does not simply “oppose motion”
  • third-law pairs act on different objects
  • constant speed around a curve is not equilibrium
  • do not draw components as FBD forces
  • do not add a separate centripetal force
  • orbital $r$ is center-to-center radius
Before you move on
  • Can you change system boundaries deliberately?
  • Can you draw AP-format FBDs without component arrows?
  • Can you predict friction direction from slipping tendency?
  • Can you separate whole-system and single-object equations?
  • Can you explain apparent weight from acceleration?
  • Can you derive conical, banked, and orbital relations from Newton II?
Quick Check 12
A student writes “The normal force and weight are a Newton’s-third-law pair because they are equal and opposite.” Give the shortest correct response.
Incorrect. They both act on the same object, so they cannot be a third-law pair. The pair to the normal force is the object’s force on the surface; the pair to the weight is the object’s gravitational force on Earth.